Anyone know the part number for the anti roll bar?I cant find one anywhere.
@orif96072 күн бұрын
Entirely engineered to require you to pay a mechanic to do it, vw twats
@THETOECUTTER7442 күн бұрын
Good work 👍
@MrSquadup22 күн бұрын
Did you just straight up ground the parking break? I have the DIY bypass but it’s still stopping the video playback while driving. Trying to do the so the kids have something on road trips.
Tengo un dgx 620 .Lo que el tiene es que el sonido al maximo nivel es muy bajo.Que será?Ayudame por favor.
@noahneji58084 күн бұрын
you did the metering side reversed, on the metering side of the carb the gasket goes first and then the diaphragm.
@jamesknowlson92784 күн бұрын
Very informative videos, would it be same oil for the Diffs oil change on a mk5 r32
@BenRattigan5 күн бұрын
I’ve got the same issue with 2017 Tiguan, is it likely to be the same problem?
@SoRusted5 күн бұрын
cant take it out
@SoRusted5 күн бұрын
the bulb holder wont twist, my hands are all blue at this point
@olliegray64295 күн бұрын
Sorry for the late message I work nights. I’m buying a camper van with a 3.9kg calor gas bottle that’s exchangeable connected to a regulator on a flexible rubber hose which is linked to a copper pipe fitted to a Cramer 4 burner gas hob. This is only available for exchange in England. I want to travel Europe where these bottles you are selling can be refilled. Can I turn this system into lpg? If so I would like to purchase this but I have no idea where to start. Can you help me out with any tips? Thanks alot!
@JasonScriven5 күн бұрын
Should I just silicone around the rubber on top of the boot where it feeds the wires?
@adampratt57856 күн бұрын
The silva bag on my seat Leon has blown and contaminated everything including the heater matrix. What is the best way to clean out the system?
@ThePandeo7 күн бұрын
How did you pop the plastic rivets out under the bumper? Mine are stuck on 😅
@user-se7ye1jl7y8 күн бұрын
HI I JUST FITTED A NEW WASHER PUMP ON MY VG 2014 FALCON I HAVE BLOWN AIR THROUGH THE HOSE AND CLEANED THEM OUT BUT WHEN I FILLED THE BOTTLE THE WATER DONT REACH THE WINDSCREEN
@mrtrump-pf1nx8 күн бұрын
Nice video keep making them wishing you the best
@charleswillard7758 күн бұрын
Good job didnt you use the cheaper Mannol stuff before?
@gerrylewis60258 күн бұрын
Very informative video. Do you have any similar videos for a Yamaha Clavinova CLP300? I have one that the volume slide is not working and you can just faintly hear the notes when a key is depressed.
@bm_wuratli68839 күн бұрын
that mean i can fill my g13 with g12evo?*
@TurnersWorkshop978 күн бұрын
Providing it’s not the particular 2015 2.0 TDI engine mentioned it should be upgraded to the G12evo
@JakTonge9 күн бұрын
I was installing a new clutch cable and the fork fell away from its position, came across you vid and it has given me hope, what a champ 💪
@michaelstanley79089 күн бұрын
This as help me out a lot and clear instructions on how to adjust the valves spot on video this will help to keep my suzuki gn125 on the road.
@Tinkermatt10 күн бұрын
Oil buy another van mate get out there and enjoy get away from 9-5 while you’re young and I’m guessing single now !
@TurnersWorkshop978 күн бұрын
It’s very tempting!! 😬
@user-zh1mx6sv8w10 күн бұрын
Did you get rid of the transit? Your build series is the reason my transit has a caravans underslung water tank, a Fiamma fresh water tank and a kenwood head unit 😂
@TurnersWorkshop978 күн бұрын
Haha 😅 sorry mate I parted with my transit a while ago now.
@martingreenfield779510 күн бұрын
Good to see a new video Oli. I went to Rhodes many years ago with my best mate. Good memories.
@TurnersWorkshop978 күн бұрын
Cheers mate, it’s a beautiful place! Does it look much different from when you were there?
@martingreenfield77958 күн бұрын
@@TurnersWorkshop97 not really. The sea is still just as blue. The thing I remember most was massive wasps dive bombing the swimming pool!
@mostelusive431311 күн бұрын
What skodas are they in
@TurnersWorkshop978 күн бұрын
It’s worth checking the expansion bottle, they will be it Fabia, Yeti, Octavia etc.
@jamestyler847711 күн бұрын
I've changed the air filter, sparkplug and topped up the oil as it didnt look too bad. I removed bottom of carb in situ and sprayed carb cleaner up into it and cleaned out the sediment. The mower runs, but its like its revving ever so slightly rather than ticking over. Any ideas?
@TurnersWorkshop978 күн бұрын
Hunting engines are usually an indication that the engine is being starved of fuel. Could be a partially blocked carb still.
@popollo2212 күн бұрын
Great video. I tried this but it did not work. My 2014 mk7 has 2 additional screws which are at an angle in each wheel well that hold the bumper to the trim that goes over the wheel.
@lucasmo4200012 күн бұрын
Hello, I have one question on this video you fill the gear box under the van, Il an other on the bottom of the gear stick, which is the best?
@TurnersWorkshop979 күн бұрын
Hi, it’s easier to fill from the top in the cab 👍🏼
@lucasmo420008 күн бұрын
Ok fine, I flush mine but 1st and rear gear are difficult to pass. I will try to put oil from the top, I can put more oil, so it may be better to pass gear
@TurnersWorkshop978 күн бұрын
Have you tried adjusting the clutch slightly? Might help it engage the gears easier
@lucasmo420008 күн бұрын
@@TurnersWorkshop97 yes I try it, and also with excess it doesn't change anything. Oil in is 75w90 Mine is a 95vt, it's not very reliable
@damirjaklin944414 күн бұрын
A really good video.Thank you!
@AJDRAGON0114 күн бұрын
The one downside to that fan that I can see is you don't seem to have any control over how much the vent can be opened or closed, It seems it only opens all the way or closes all, no in between.
@TurnersWorkshop978 күн бұрын
That’s very true, does the max air fan have that function?
@user-ht1yp9qn6e15 күн бұрын
Hi I have followed your schematic and whn I make the system live after aprox 10 seconds the 2 Amp fuse blows? im still scratching my head? would you have any ideas?
@TurnersWorkshop978 күн бұрын
Hi, I would check to make sure all the positives and negatives are in the right locations. If one gets crossed it will create a short circuit and blow the fuse.
@RydeOfDoom15 күн бұрын
Very nice and straight forward video Sir!
@TurnersWorkshop978 күн бұрын
Thank you! Glad you liked it 😊
@shaunroberts-downing381516 күн бұрын
Nice job buddy
@TurnersWorkshop978 күн бұрын
Thanks mate 😊
@epiphgd430218 күн бұрын
Jesus lad, a gas heater? Is waxoyl not really flammable
@TurnersWorkshop978 күн бұрын
It sure is, found out the hard way once! 🫣
@johnbarber68919 күн бұрын
Great job if you was my son I’ll be so proud of you that job was a tough one you persevered your going to go along way with your skills this would have been to bigger job for me so I’m very impressed I have a transit mk5 camper and I have a couple of wet patches in between the seats and I’m slowly trying to to work out why . Well done again
@TurnersWorkshop978 күн бұрын
Ahh thank you! I really appreciate you taking the time to leave your kind comment. It’s not the best repair but stopped the leak anyway. I think it’s most common for them to leak around the screen unfortunately!
@gregbouchard41419 күн бұрын
U do a rally good job on here am a big support of u do a rally good job on here keep up there good work on here
@TurnersWorkshop978 күн бұрын
Thank you so much! I really appreciate your feedback 😊
@marshallkaufman312319 күн бұрын
do you know what gasket would work on Chinese copy motors? i know honda changed the clutch cover gasket after 2000 and i dont want to buy the wrong one. plz help
@TurnersWorkshop979 күн бұрын
I would buy some gasket paper and make your own to suit, can’t go wrong then 👍🏼
@ambergoodland227120 күн бұрын
What size did you go for? I went for smaller but don’t think I can use those with the insulation
@jaswarriorr12320 күн бұрын
Hi, this video helped me resolve the completely no sound issue, but now the piano keys are significantly softer than any other sound made by the piano (even the metronome). Confirmed that the speakers overall working fine as the demo music is still decent volume, but any sound generated from me pressing the keys are extremely soft. Any possible ideas what else might cause this symptom?
@finka463820 күн бұрын
No filter needed?
@TurnersWorkshop979 күн бұрын
I’m pretty sure not in the manual transmission
@BrianRead-dy9sx21 күн бұрын
How long did this restoration take, & how much did it cost ..?
@TurnersWorkshop979 күн бұрын
Im not sure exactly as the recording always takes a long time. But cost around £30-40 for paint and materials.
@Taylor4066725 күн бұрын
How often would you suggest doing this ? Mileage/years
@TurnersWorkshop979 күн бұрын
Haynes manual recommends every 20,000miles or 12months, whichever comes first.
@LakesLee25 күн бұрын
Great video, confirmed what i was thinking on my lads golf. Exactly the same with 2013 onwards ford focus too!
@dck27227 күн бұрын
An hour of my time, couldn't get the fuel line off. Stuck fast and didn't want to tear it. I wasn't gentle either though. So couldn't get any of the springs/other cables off (except the really hair thin one). Tore the gasket trying. Gave up but sprayed the carb with the cleaner and at least it runs again (as long as the choke is on).
@TurnersWorkshop979 күн бұрын
You gave it a go mate and that’s what counts. They can be very fiddly to work on but changing the gaskets may make it run much better.
@ryanlavering27 күн бұрын
Thank you for making this. My keyboard is back in business. Same exact capacitor. Must be at a stressful spot in the circuit.
@kellstat27 күн бұрын
You could go a lot bigger coil diameter and just tread it in the top hole. Don't know how much difference it would make or if even needed? How has it worked and what temps can you bring the water up to, and how long does it take to bring up to temp?
@TurnersWorkshop979 күн бұрын
The problem would be using the existing 8mm holes in the keg, so had to use 8mm pipe. I made some more videos testing it out if you’re interested 😊
@caoimhmccool478428 күн бұрын
What type of wood do you use to create the drawer walls and the cupboard panels? And where do you get it from? My closest is b and q and the only thing similar is strip wood which is expensive
@caoimhmccool478428 күн бұрын
Awesome job btw!
@TurnersWorkshop979 күн бұрын
Thank you! It’s all made from reclaimed wood, old wardrobe furniture board. Old futon slats mainly. Sourced from the Facebook marketplace 👍🏼