Thank you. I won't ever drive a combine irl, but I think they are very fascinating

What price cutting blade 1 pc

Rotor loss? Let's not discuss the fact that the S series can't combine 25%+ corn well.

Dg🎉e

Is there an adjustment that can be made to make the rear latches on the deck connect easier? I have a 2022 1025R with the 54D Auto Connect and it's nearly impossible for me to get the rear hooks attached. I have to yank on the deck with all I got to pull it far enough back to get it to latch. It has never latched on its own when driving over it.

A JD 9600 is good for rice?

Le

your product is india transport

What is the part # for the concave block off plate? Would running the small block off plates in the separator grates help even out the crop over the cleaning shoe? Thanks

New subscriber my friend

First time seeing big grates.

Just found this video , excellent information! Thank you for posting it!

Thankyou! Very helpfull! I have a 9500 JD combine, getting ready for the 2022 wheat harvest here on the Southern most tip of africa! Greetings

Your videos are a great resource. I have learned more about my combine than from any other source. Thanks.

thanks for taking the time to record this. A useful intro. UK farmer

Dios te ama 🇨🇴 bendiciones 🙏 Bogotá 👌

Hi there, do you have any video for how to take apart the elevator chain? And also the elevator shield, our combine it's plug with mud and beans.

I think you were backwards on your gap of the deck plates. Shouldnt it be wider closer to the gear box

Still no explanation to why the grain loss monitor averages the chaffer loss with the rotor sensor. The rotor sensor is there to indicate to the operator to either change the rotor speed or to adjust concave clearance. It is not loss of grain out of the machine. Why does John Deere continue to display the chaffer sensors with the rotor sensor. They have done this since the inception of the sts , in the year 2000 , on a display monitor that was designed for the walker machines. It even has the walker icon pictured on the right hand side of the display. The John deere engineering department should have replaced the monitor to a display that separated the sensors totally. The operators first instinct, is to slow the ground speed of the separator, when they are presented with the centre bar graph rising above their preset allowance. In most cases (usually when getting colder towards evening) the rotor sensor will indicate a rise in activity, which should tell the operator to increase the aggressiveness of the threshing, to get more of the separation at the front of the rotor. Release of grain at the front of the rotor can also be achieved by removing filler plates or changing concaves to a more open type . I hope this helps.

Thanks for letting know about hidden grease zerk

👍Thank your video，we have a 9500combine，i wish i see this video 5years ago

Hello sir

Great video with detailed explanations thank you!!

How much grain has to go through it or hrs to be worn like that if your maintenance and greasing are regular

See you guys April 23rd coming down.

Que diferença das máquina brasileira muita coisas diferentes muito interessante

I replaced the walker bearings with wooden bearings......no greasing ...like it a lot better

You can control sections and rate on the fertilizer snd planter at the same time?