Best optics videos hands down. If your service is anything like this channel I'm sure you guys rock
@LuckyDogGamingКүн бұрын
Does the aspherical glass on the eps carry vs the 407k make a difference to the optic? I have astigmatism and the 407k is usable but not perfect, I’d love to improve anyway I can.
@chrisc4824Күн бұрын
I just want one red dot… just one 🥲.
@HomicidalTh0rКүн бұрын
I just bought the 507c. This has been a helpful video. Thank You ^.^ Can't wait to zero it out!
@JakeCamoКүн бұрын
Bought the new glx rs15 from you guys, and immediately had an issue with it haha. Primary arms warrantied it and now it’s running fine. Will see how it holds up over the next 1000-2000 rounds
@PeterKushubarКүн бұрын
Outstanding video, with fantastic information: I learned more in this video than in all previous videos, from other knuckleheads! Thank you very much!
@llildavie2714Күн бұрын
Question I have Glock 35x
@nathannotimportant9379Күн бұрын
It's good we have you considering they're too afraid of their own product to list pertinent information or even take a picture of the bottom.
@85Sirex2 күн бұрын
Great, informative video.
@golfblood222 күн бұрын
No link for the filler plate??
@freedomgorilla1Күн бұрын
It’s in the blog post we link to near the top.
@KNIGHTRACEDOTCOM2 күн бұрын
On rifle I think the 507 ?
@TARandFEATHERS2 күн бұрын
By the way, an absolutely great , helpful video.
@freedomgorilla1Күн бұрын
Thank you!
@TARandFEATHERS2 күн бұрын
Will any of the enclosed emitter optics work on pic rail like on a Rossi rifle??
@freedomgorilla1Күн бұрын
Yep they totally will. We have pic rail adapters for any of them
@TARandFEATHERSКүн бұрын
@@freedomgorilla1 Thx. I'm saving up for an enclosed emitter for my Rossi R92. I'll check out your website.
@tavaraswilliams64032 күн бұрын
I prefer red.
@mike347442 күн бұрын
I have the same exact set up and the screws that came with it do not work. The left side screw seems to go down correctly, but the one on the right does not go down correctly and won’t go flush because it’s hitting something and looks to be too long. Which screws did you use?
@freedomgorilla1Күн бұрын
Yes they’re too long. We have screws we sell on our website. For this you need m4x9 or m4x10. But the m4 head is a special width so they’re a little custom.
@mike34744Күн бұрын
@@freedomgorilla1 thank you
@tavaraswilliams64032 күн бұрын
The right one is more clear
@Slasherx282 күн бұрын
What screw set did you use for the 507 comp? I used the 507c screws that Springfield provided, torqued it, and it came loose. Thanks for the video by the way.
@NationalChampRush2 күн бұрын
For the FN 509 midsize tactical would the 507 comp be good?
@JG-dd9xv2 күн бұрын
Holosun is for people who can’t afford Eotech/Aimpoint/Trijicon. There. Didn’t need a video on this. That explains it.
@ls662 күн бұрын
Man that was information packed. Straight to the point. Now I know what I’m looking for in a pistol sight. Great work. I’ll be shopping from your website. Thanks
@freedomgorilla1Күн бұрын
Thank you. We really appreciate it and am glad it helped!
@Skidz18183 күн бұрын
If you are looking to get an optic (especially for a pistol) I would HIGHLY recommend these guys. EXTREME customer service, SUPER knowledgeable and INSANE shipping costs and speed. I personally have talked to Paul both online and over the phone and he spent over 15 min with me and at no point did I ever feel rushed or "stupid" with all the questions and clarity I needed. These are a GO TO resource for your optic needs!
@freedomgorilla1Күн бұрын
Thank you! We appreciate you!!
@vicpal57Күн бұрын
I TOTALLY agree! Paul and the company is awesome!
@shootsouthpaw77713 күн бұрын
Sent you guys an email a week ago. Every site and video covers the K footprint is a modified RMSc so the a K pattern optic will not fit on an RMSC. My question was will a RMSc fit on a K plate? Your website shows 2 slide examples. The K with 2 lugs and 2 raised screw posts and the RMSc with 4 lugs and 2 flush screw holes.
@freedomgorilla1Күн бұрын
Yes an RMSc will fit on a k series footprint
@shanillramos88123 күн бұрын
🎱🍕😷🥃👽
@onpsxmember3 күн бұрын
Great video. I'm trending towards an EPS, since I want it enclosed, adjustable and still not that heavy. That one as T version making it even lighter would be cool. an EPS is 39g, a carry is 28g. 509T is 49g which is amazing for the size and toughness. An Acro C-2 is 59g (P-2 is 2g more), an RCR is 56g, Steiner MPS 58g. The heaviest I've seen is the Swampfox Kraken with 67g. Now add a plate as well. One downside of the EPS is a CR1620 battery. It isn't about the battery life, but availability is way worse than a 2032 or a 1632 and there is less variety. Could you do a battery low temperature endurance test till they go down while mounted?
@shanillramos88123 күн бұрын
👽🥃😷🍕🎱
@Quality_Guru3 күн бұрын
I believe that you think that you are better than you are. When I was looking for a red dot for the S&W 5.7 I landed on your page and within you stated that you would provide the specific screws needed to mount the Holosun optic for free. I contacted you asking how to get the free set of screws needed for the S&W pistol. I never heard back from you. You don’t even have anyone answering your phones. BTW you don’t list them. You make every effort to shield yourself from your customers. You need to raise the level of your customer support. You pretend to be customer centric but you are not! Not trolling just telling you why I don’t do business with you. You sell at the same price as Amazon and provide the same level of pre-sales support as them which is nothing. The difference is that you are an unknown entity, whereas I been doing business with Amazon for years. You really don’t offer any significant advantage buying from you. I pray that you learn something from this comment as most customer just walk away and never tell you what’s wrong.
@freedomgorilla13 күн бұрын
Appreciate your feedback, we answer tickets through email and if you listen to our voicemail you would hear us recommend contacting us that way and we’re very responsive. We do answer phones also but we can’t answer every single call at this stage in our lifecycle. 2000+ written and verified customers would completely disagree with you about our support. We answer every ticket that comes through. Anyone who has ever asked for free screws gets them. Amazon is a faceless organization, and optics you get from them may be new or may be returns. Amazon also won’t help you choose your optic, or know the nuances of screws or adapter plates like we do. We also don’t charge tax in many states so many people save money that way. I appreciate you writing the comment however your comment is not an accurate depiction of our company, i encourage you to read our reviews and also contact us via email or text, then you will see the service we offer. From your comment it sounds like you didn’t even listen to our voicemail and don’t grasp fully that we are a small growing company vs a trillion dollar marketplace like Amazon. I’d say the bigger takeaway here is that i do wish we could answer our phones, we are working towards that, and i also encourage you to buy from whoever you feel most comfortable with! Hopefully you found the information helpful that we provided - not Amazon. P.S. if you want free screws just email us on our website and we’ll happily send them to you if you ordered from us no matter when you placed your order. Also I’d be happy to look up a previous email you sent if you said we never responded. We have a policy to answer every single email that comes through no matter what
@Quality_Guru3 күн бұрын
@@freedomgorilla1 Just to put it in perspective, I can talk to “someone” when ordering a 20 dollar pizza from a mom & pop shop. You are correct in that I should be able to speak to someone when I call or at least have someone call me back should I be able to leave a message. While the rest of the world is working on multimedia connections, you are only utilizing email. You are not significantly growing your business if you limit yourself to a single customer interaction media. Enough said!
@Kpak73 күн бұрын
If you don’t like freedom gorilla, the problem is with you.
@freedomgorilla13 күн бұрын
You are an amazing human
@beforedeth21043 күн бұрын
I got a non mos g45 and was considering sending my slide off to jager works to get silencer irons and it cut for 210 and get a 509t when it returns im sure it will take a month to 2 so ill have saved up for the sight by then but just dont wanna make wrong decision. This is my EDC and im a large boy 6’4 245lb hoping this setup with a nice custom iwb holster can still be consealed without major printing. Primarily I go to the range to shoot but want to be proficient with my weapon that I plan to carry. Would you suggest this or what would you say? I have a stigmatism and kinda bad eyes and feel a sight would be a lot easier then irons, I am low low income but think this is what I’d like but would love your input I’m a new gun owner 30yo and just want to buy and cry once and get what will be ideal for me in a range of scenarios. Thanks!
@freedomgorilla13 күн бұрын
I would honestly focus mostly on the cowitnessing of iron sights. If you can get the slide milled for the eps full size, and still cowitness your low iron sights or even get some nightfission “optic height” sights i think that would be nicer than needing the tall supressor height sights for the 509T
@OzzieBenzC3003 күн бұрын
Glad I came across this vid! U guys look a very fun group of guys! Definitely be checking out the website. Thanks for all the comparisons vids!
@freedomgorilla13 күн бұрын
Thanks a a lot! We really appreciate it and are happy to have you here!
@cw58653 күн бұрын
Great review and tagged the points as I own one of each for their respective roles...
@freedomgorilla13 күн бұрын
Awesome! That means a lot!
@cw58653 күн бұрын
@@freedomgorilla1 Oops on a couple words (corrected) as I didn't proofread before post. You guys are the go-to when trying to figure out the various models and functions.
@mikegibson88074 күн бұрын
Perhaps you could do a video on dlah design low profile plate for Beretta..😎👍
@johncampbell63704 күн бұрын
Great video; I will have questions in the future
@freedomgorilla13 күн бұрын
Thank you! We’ll be here when u need us
@richardh4184 күн бұрын
That's the reason i purchase one is for direct month on my Smith&Wesson plus a lifetime warranty.
@Zosa_4 күн бұрын
Thanks i needed this
@freedomgorilla13 күн бұрын
Glad we could help!
@KNIGHTRACEDOTCOM4 күн бұрын
Put the 507C on a 300 blackout B14 Bolt gun. It goes in front of the bolt and is clean and super light. We have a second one what do you think I should put on it the Competition or the C ? Thanks in advance
@terryvincent37884 күн бұрын
How about the SCS for the VP9 ?
@Skidz18183 күн бұрын
Thats what I am running on MY VP9L. It is an OUTSTANDING optic and very easy to use.
@joshwagner89544 күн бұрын
Nope. Sorry Trijicon swing and miss. They should have included the features in the RMR HD into RCR. Also, why no green dot?? Trijicon is still WAY behind Holosun. The 509Tx2 absolutely destroys the RCR.
@fancyhitchpin86755 күн бұрын
On the 507 comp, when you say "not by any means a duty optic" do you mean it's not as sturdy, or just that it's bulky?
@freedomgorilla14 күн бұрын
Great question. Hopefully i didn’t come off too strong there. I just meant that Holosun didn’t make it to be a duty optic, they made it for competition. It is still strong because it’s 7075 aluminum, but it is also quite large, so not the most concealable. Can it be used for EDC? Yea for sure people use it, i just wanted to make it clear that it wasn’t really designed for that.
@SupergiantgeckosLLC5 күн бұрын
AEMS
@RonJustice335 күн бұрын
Better late than never . I made it lol. Thank you , great info & helped me to zero in on the Holosun EPS Carry Red MRS 2 MOA DOT & 32 MOA Circle for my 43x MOS
@freedomgorilla14 күн бұрын
Awesome! Very happy it was helpful!
@LoveLikeaHurricane5 күн бұрын
c series...RMR footprint, and also SCS MP2 is for Full size MP 2.0
@AntonioMartinez-ic5xj5 күн бұрын
After 5 days of non stop researching, i settled on this sight getting it from your site. Thank you!
@mitchellian99015 күн бұрын
they make flat head screw drivers too
@freedomgorilla15 күн бұрын
You’d need a really fat one. U need a special key they have
@KonamaXxX5 күн бұрын
Do you know if the 509T X2 fit directly on the Bul Armory SAS 2 Tac G2 RMR adapter, or do i need to use the Bul RMR adapter in addition to the Holosun RMR adapter plate?
@freedomgorilla15 күн бұрын
Hey. I don’t remember that one off the top of my head but i know with bul armory some of their RMR plates have screw posts. If you have thr screw posts thr 509t or eps full size won’t fit. If you DONT have screw posts then it should barring any screw length issues
@Hindaril015 күн бұрын
Does the eps carry sit low enough to cowitness with the stock irons on the p365 xmacro
@julianf1475 күн бұрын
Ain’t this point of my life I’m just buying stuff off the internet I purchased the He508T-GR for my Glock 45 MOS……did I do a good job?