Mine has been pretty damn reliable so far. Gotta make sure it isn’t a light load, the 7/8 ounce loads don’t seem like a good idea at any velocity. Sadly, my front sight broke when I tried to take it off mine lol I hope the warranty works Way too much heavy thread locker on this thing.
@davidmeeker7481Күн бұрын
Brother..I appreciate the effort, but.....trying to record and trying to hear you on a live range is like hearing a pin drop on a runway during a jets take off. I thought I would be nice this time. What were you thinking ??
@BendingBallisticsКүн бұрын
@@davidmeeker7481 um im sorry that I goto a range that has people shoot at it, I work a 9-5 my free time unfortunately is when everyone else's is too
@charlesdavaro85542 күн бұрын
Winchester is to look a load and junk ammo
@BendingBallistics2 күн бұрын
@@charlesdavaro8554 the "junk Winchester " ammo runs fine in every semi auto shotgun I have besides this one
@kenshin0344 күн бұрын
Nah just find a mossy 930 security/spx/jm pro under $750 used or $350 used 88/500 over a new 🔫🦃 any day 😂
@wnessnol4 күн бұрын
why would it run that trash? follow the directions. Get an M2 or mac2 if you want low brass
@BendingBallistics4 күн бұрын
@wnessnol I did follow the instructions thanks, it's ran it off and on and if a shot gun that has well over 1500 rounds thru it won't run "cheap" ammo then what's the point in ig it should run it everything you feed it just as good really isn't that good there's a part 2 coming out
@Michigan4Conservative5 күн бұрын
Geez, where were you when I learned to shoot?? There is nothing like hearing an uncle say: go get me a beer and you can shoot my gun" Me: hands over a cold can of beer. Uncle: hands me a 12ga with goose loads.😮😅
@tanishazoa1386 күн бұрын
I only have about 40 rounds through mine. Same model wood. Did you find any parts? Could do an install vid
@BendingBallistics6 күн бұрын
@tanishazoa138 I can't do installs on videos per youtibe policy, I am going to get a few benelli parts soon and upgrade the 12g I have another video on my series coming out on it in the coming weeks
@efisiomeloni56607 күн бұрын
Bello sport non sudare tanto che poi dimagrisci 😂😂😂😂😂
@BendingBallistics7 күн бұрын
@@efisiomeloni5660 mi stai dando della grassa
@Michigan4Conservative6 күн бұрын
@@BendingBallisticsNo, I believe the comment was towards the bulky rifle. Loosing 12" off the barrel makes them louder and lighter.🔥😅
@BendingBallistics6 күн бұрын
@@Michigan4Conservative gotcha
@EagleRun238 күн бұрын
safety check!! :)
@jamespugh8 күн бұрын
Looks like same tripod that chris from 740 has
@BendingBallistics8 күн бұрын
@@jamespugh mine is a sunwayfoto I'm unsure which one he has
@Corn-pop1110 күн бұрын
Stop playing with that sling 😂
@BendingBallistics10 күн бұрын
@Corn-pop11 why tho 🤣🤣
@cw2a10 күн бұрын
Gettin better! 😂😂
@Rachelsjdwilliams14 күн бұрын
Best asmr...
@positiveanion408515 күн бұрын
Wouldn't be surprised if that white box jammed in a $2000 Benelli.
@BendingBallistics14 күн бұрын
They run just fine in my benelli
@positiveanion408513 күн бұрын
@@BendingBallistics Very interesting. m2 or m4? I’ve heard the m2 does light loads better than the m4.
@BendingBallistics13 күн бұрын
@@positiveanion4085 I have the m2
@WolfNeve17 күн бұрын
I been using p Mags, seems good
@Michigan4Conservative17 күн бұрын
MY favorite magazines???? Why of course they are anything that someone else has loaded.😅
@dgunearthed785918 күн бұрын
You commented in a short u have 2,500 rounds through it. For a turkish shotgun, thats amazing. James from tfb hasn't been able to find a turkey gun to last 400 rounds. Ill have to let him know about this one.
@BendingBallistics18 күн бұрын
@dgunearthed7859 I run this one in 3 gun. I don't beat on my stuff but I do run it hard and I perform maitence on it as needed
@boomcountryhydro18 күн бұрын
Thats a sign of old age 😂
@Halfmilesniper18 күн бұрын
Been there, done that...hate when it happens.
@Michigan4Conservative18 күн бұрын
I launched a mag spring and parts off the bench, into the range grass this weekend. Found all the parts too. 5.7 sideways stack rounds jam in the magazine if loaded backwards.😅
@WolfNeve18 күн бұрын
arthritis sucks
@Michigan4Conservative22 күн бұрын
Trying the tripod.😅
@MrIronhead198824 күн бұрын
High brass to break it in I have the same one after the break in 👍🏻
@BendingBallistics24 күн бұрын
@@MrIronhead1988 I am way beyond break in round count in this shotgun
@ARPatriot1776Official29 күн бұрын
Hello @Bending!!😊😊
@chaoticcaninejb29 күн бұрын
I used a poly cutting board, drilled holes and added arca on it and applied 3m grip tape on top, great hasty tac table. I could drill holes and apply whatever if need be, but wanted a flat grippy table on tripod for basic bag work and various things.
@BendingBallistics29 күн бұрын
@chaoticcaninejb the innovation of creating your owns has both pros/cons, one pro is being cost, one con could be is over all strength of said tac table vs aluminum
@lenhamilton1369Ай бұрын
That range looks like Cedar Creek Precision outside of Hopkinsville.
@BendingBallisticsАй бұрын
@@lenhamilton1369 it is
@SlavGunsАй бұрын
Awesome seeing you put out stuff again!
@BendingBallisticsАй бұрын
More to come!
@cw2aАй бұрын
💥🇺🇸❤️🩹🇺🇸💥
@WolfNeveАй бұрын
Damn that's only 4 feet high?
@BendingBallisticsАй бұрын
Its almost 8ft tall I was on a slope
@Michigan4ConservativeАй бұрын
So .... Either that tripod extends to 7' tall or....😅
@BendingBallisticsАй бұрын
@@Michigan4Conservative im the legal height of a leprechaun
@Michigan4ConservativeАй бұрын
@@BendingBallistics 😅👍
@SlavGunsАй бұрын
That is super awesome!
@Michigan4ConservativeАй бұрын
Strange.... I was expecting a plate of freshly grated cheese for some reason. 😅
@connorstanley777Ай бұрын
How did you get into long range shooting and what was your first set up? I'd be interested to find out, bc long range shooting seems to be a bit more difficult to get into when you're starting out.
@BendingBallisticsАй бұрын
@connorstanley777 I got started in firearms when I was in high-school I was on our rifle and trap team, after I went to college I joined my colleges rifle team then went into law enforcement I never really shot much long rage beside 300 yards and in till I joined the srt team with my agency, did that for a long time but continued to shoot 3gun for years with a mix of just long range experimenting before I transitioned to shooting long range matches. My first "long range rifle" was an ar10 in 308 and still shoot that rifle pretty frequently to this day. The biggest hurdle to overcome with long range is an area to shoot long range at. You're welcome to email me. My email is on my channel page. You don't need a 4k rifle to go shoot long-range a 308, either bolt action or gas, you can get into experimenting with it. Having a Ballistics calculator app on your phone is really all you need besides a rifle scope and ammo.
@Johnny-jr2lqАй бұрын
Just figured I would let you know this tri pod set up is more of a hunting thing. Personally I found my precision set ups shoot much better from a bench or in prone position. Every tripod and ball mounts I have used and I have tried some spendy ones. Have all amplified movement no matter how you mount the rig in it. In my experience the best place to mount your rig in one of these set ups is all the way at the end as close to the muzzle as you can get.
@BendingBallisticsАй бұрын
@Johnny-jr2lq i will let you know I use this exact ball head on my tripod at prs matches, I use it as a rear support where I can I also use it to spot off of prior to shooting the stage. If im going to be shooting prone then I'm not using a tripod im using a bipod. I have used this exact ball head on my tripod and on multiple occasions to shoot over 1300 yards at the range. I have also had shooters who have never shot over 300 yards or never shot off a tripod use this ball head on my tripod and consistently hit over a 1000 yards. So I strongly disagree that this is just a "hunting tripod" is there a learning curve when using a tripod absolutely but I wouldn't consider this ball head on a tripod to be just a hunting tripod.
@aaronwilkinson8963Ай бұрын
I like the look of that Shotgun.
@BendingBallisticsАй бұрын
@aaronwilkinson8963 it's a great shotgun thanks for watching!
@chrisregister8021Ай бұрын
I have to agree with you....
@Michigan4ConservativeАй бұрын
Light and sturdy. Good stuff.👍
@user-ty1ri8xw1sАй бұрын
Wrong sized shells??
@BendingBallisticsАй бұрын
Nah it was definitely 12g
@TheCoolwhippedАй бұрын
Low brass runs like shit in nearly all semi autos.
@BendingBallisticsАй бұрын
The federal low brass ive been running runs fine
@TheCoolwhippedАй бұрын
@BendingBallistics maybe you have better luck, or your springs happen to be weaker, but semi auto shotguns, of all brands, are NOTORIOUS for being unreliable with low brass, because they're usually gassed to run optimally with 3" shells, as that's what they're chambered for. Both the springs and gas system run best on beefier loads. Some even tell you in the manual to ONLY run high brass.
@BendingBallisticsАй бұрын
@TheCoolwhipped I have a pison gas system in this one it's generally pretty reliable other then with Winchester white box ammo
@j.p.9522Ай бұрын
What's the FPS on that birdshot? Its recommended to only run 1350 FPS or higher ammo for the break-in period.
@BendingBallisticsАй бұрын
It was 1300
@NChillbilly3 күн бұрын
run higher fps and clean gas tubes
@BendingBallistics3 күн бұрын
@NChillbilly it should run the ammo I was feeding it it was well beyond break in cycles. I've cleaned the gas system multiple times now, I also have the mind set if a firearm can't run dirty it doesn't deserve to run clean...
@NChillbilly3 күн бұрын
It's disappointing I'm sure. Have seen so many mixed reviews. Some swear by theirs and others having issues like you have. I guess there are a lot of duds out their. It sucks because I was trying to talk myself into one since I don't have 2k for the real thing. I had a Benelli M1 back in the 90's and loved it.
@BendingBallistics3 күн бұрын
@@NChillbilly I mean for a cheaper shot gun in semi auto their not awful, the only ammo it hasn't ran is the white box Winchester
@ashylarry7411Ай бұрын
Just got one for $341 at Dahlonega Armory! Ordered Tuesday, delivered Thursday. Shipping +ffl fee brought me to $374 💪🏽 Seems solid, cant wait to shoot it.
@BendingBallisticsАй бұрын
I went out and shot mine again today it was interesting
@ashylarry7411Ай бұрын
@@BendingBallistics hopefully in a good way?
@BendingBallisticsАй бұрын
@@ashylarry7411 you'll have to stay tuned to find out
@Michigan4ConservativeАй бұрын
Not looking good for Winchester.
@jamespughАй бұрын
I got Hatfield sas 12ga only run 3inch mag 4shot or high brass 5 or 6 shot . Never put low brass in my yet. I say oil it and clean might have adjusted the gas sleve in it also for light field loads.
@BendingBallisticsАй бұрын
Im gonna do that I wanna really get down to the nitty gritty of this thing
@Michigan4ConservativeАй бұрын
Nice to see options like this. 👍 Thanks
@cjbecker1683Ай бұрын
Seeing these going in the $350 range now brings me to KZfaq to see how they do.......looks good 👍
@BendingBallisticsАй бұрын
I have nothing bad to say about mine
@p47rrАй бұрын
I built a Wilson Combat rifle as well. You are right. About the handguard barrel nut. It was an odd size. But I had a barrel nut wrench that was close. Used a small piece of brass as a shim. The only thing that isn’t Wilson combat is the barrel, gas block and gas tube. I want a standard rifle length gas system.
@Kghost0311Ай бұрын
Wilson combat rifles I don't even think about. Bcm,DD, spikes, lmt are all better options than a rifle from a 1911 manufacturer
@jbcustom3745Ай бұрын
noveske has an intermediate gas tube that works very well
@CompanyHaze2 ай бұрын
I reverse build. Many of Omni ATIs I got running n sold. Sorry to hear your pain, that sucks. I stay away from Bear Creek too...
@BendingBallistics2 ай бұрын
Im not a huge fan of bear creek however some of their stuff is cool. I'm not into brand bashing or budget shaming, I feel bear creek has their nitch market of budget. However I think bear creek could do better on quality control or customer service. Much like any company they all have their flaws
@CompanyHaze2 ай бұрын
@@BendingBallistics perfectly said brother 🙌
@WolfNeve2 ай бұрын
I love my gerber stuff
@armorers_wrench2 ай бұрын
They say on their website exactly what size wrench to use. On their website it says "Crowsfoot wrench 1-3/16" x 3/8" thick". That IS customer service. They made a barrel nut that accepts a common size of commercial crowsfoot. I do not own a single Wilson combat product but your whole issue with this was that you didn't read the description on their website for this product and if you had you'd know this doesn't use a dumb armorers wrench but just a common open ended crowsfoot wrench that is available anywhere tools are sold. Geissele also does not include a barrel nut wrench. A lot of manufacturers don't. There is a reason. It's because dealers very commonly buy parts and especially handguards and then assemble them in their shops and sell them as assembled uppers. If they include a wrench with every single handguard those dealers end up with hundreds of wrenches they don't use. Instead, they explicitly state on their website that you will need a wrench and what size you will need. IMO, that's better than charging me $5 more for a wrench that I may already own. This is a very silly issue to have with a company and then at the end of the video you literally shill for one of the companies with the worst QC in the entire AR market? What are you smoking dude? They have a good reason for no QD slots too. BCM also doesn't include QD slots. Geissele does but they now have steel inserts. Geee, I wonder if that's a hint as to why most good AR manufacturers are moving away from machined QD slots? Perhaps its because the sling QD's rely on steel ball bearings and steel wears aluminum down? Plus the machined QD slots are in a set location that may or may not be where you want/need them. You spent $1500 on a nice rifle and you're complaining about a $5 wrench that they told you up front you would need to get. A wrench that you could get from Home Depot...you then went out of your way to use an armorers wrench which was the wrong tool for the barrel nut even though they told you to use a regular crescent wrench crowsfoot. Dude, have you ever worked on anything other than a few AR15s? Do you change your own motor oil? Cuz it sounds like you seriously lack common sense. I'm legitimately baffled by this video lmfao.
@BendingBallistics2 ай бұрын
First of all, I didn't order this handguard from wilson second of all the website in which I ordered the handguard thru was from a 3rd party distribution of wilson combat was not listed that the handguard didn't come with a barrel nut wrench. Yes it's frustrating with a 1500 dollar rifle I assembled didn't come with a 5 dollar barrel nut wrench what's your point that was the entire point of the video. So you missed that one off in left field. So much like your comment you missed the point Have a great day
@armorers_wrench2 ай бұрын
@@BendingBallistics No, I didn't miss the point at all. You're mad about nothing. They told you to use a crescent wrench(I'm sure they specified the size considering they do so on their website) that you can get at any store that sells tools and you still used some random armorers wrench even though it's literally the wrong tool in this case. Why? It's an open ended crowsfoot. You probably have the size you needed if you ever work on your car. They literally designed this so that you could install it with a normal ass wrench instead of having to buy a dumb armorers wrench that can only be used for one thing. That's a good engineering decision and you're mad cuz they didn't put the wrench in the box. Would you also be mad at Geissele for that? Their handguards are even more expensive. Nothing in this world is free--if they put a wrench in the box you're paying for that wrench. No manufacturer on earth can afford to throw in a free wrench, that would add up to hundreds of thousands of dollars if they put a wrench in the box at their own expense so you are paying for that wrench every time its in the box. It isn't free. They don't include the wrench. It says so on their website and it says what size you need. You should have at least checked their website before ordering it because that's basic research that you should do before spending so much money. You asked their customer service for a wrench and they were helpful and informed you that all you need is a normal, very common wrench that you probably have in your toolbox if you work on anything other than guns and you're mad about it? Why on earth would you be mad about it? Are you mad because they didn't include it "for free"? Because I assure you, the "free wrench" in the box is absolutely factored into the price of the handguard. You only perceive it to be free because it isn't an itemized bill. This is the dumbest complaint I've ever seen about any gun company and then for you to go on and advertise for Anderson is even more hilarious.
@BendingBallistics2 ай бұрын
@armorers_wrench you do realize anderson is the oem for about 31 different ar companies correct. Tell me your not in the firearms industry with out telling me your not in the firearms industry