Why did you not make all the steering arms the same length...It just does not look right that they are not straight across/parallel to the axle...I don't know if that would effect the steering geometry, but I would not be surprised if it does...Also you should look into Ackerman steering...It would make you wheels turn more like a car...As in the outside wheel when turning makes a bigger arc than the inside wheel...And the inside wheel would have to make a smaller arc....You probably don't have caster or camber either... just saying.
@seanyfpv16 сағат бұрын
yeaah some ackerman would've probably been good. I will say that when this kart was built, the optimal steering geometry was 100% NOT the priority lol, it's literally a desk. But yeah in the future tuning the geometry would definitely be beneficial. Funny enough this did have the slightest bit of caster angle which was good for slightly tilting the kart while turning, especially with the locked rear axle. As for the steering arm length, ¯\_(ツ)_/¯ the biggest thing we cared about was it being somewhat symmetrical lol. Anyways thanks for the comment o7 You seem to be very well experienced with go karts from your videos. I'm definitely not much of a go kart guy LOL
@MyTube4Utoo16 күн бұрын
Very cool! A great design/build, and it looks really strong and smooth on hover/transition, etc.
@MyTube4Utoo16 күн бұрын
My Pocket is arriving today. Thanks for the video.
@chiparoooАй бұрын
Great breakdown. Thanks for sharing!
@dronefilmsgermanyАй бұрын
Your video is amazing. I want to buy my first RC Plane but I want to install an ELRS receiver on it, also after getting good at LOS I want to install a DJI O3 air unit on it. Which plane would you recommend that would save me money and also be possible to upgrade to the o3. I would also add a Gopro on it in case I get good at LOS and dont use DJI o3.
@tysonmcphee6376Ай бұрын
Any help on having channel 5 and having 3 modes on one switch?
@feuwza2474Ай бұрын
hey when the aircraft is in our hand and in takeoff mode, the motor runs. however, when switching to other modes, the motor stops. When we try to start directly in loiter mode or other modes, the motor doesn’t run at all. sometimes it works, and sometimes it doesn’t. do you have any idea
@oscarnaranjo844Ай бұрын
HI! i just ordered this radio as im planing on learning how to fly fpv and i've heard a lot of good things about this radio. TBH im leaning more towards fpv drones but might learn fixed wing as well, i got a question about the radio... I've heard the gimbals are really small in this radio and i expect slight less control over the drone compared to full size gimbals but it is really that much of a difference? or the gimbals size is perfectly fine for freestyle and stuff like that
@seanyfpvАй бұрын
awesome! yeah I hope you like the radio, I've been enjoying it a lot. So it is definitely a bit smaller than full size gimbals, but tbh I feel like after getting used to it, you can have the same amount of control as larger gimbals. Especially for thumbers I think it's nice. I've actually been using it more for my fpv drone and I find that it works great for that. Cheers!
@JeffTannerАй бұрын
Good job, I have a ranger ex i'm gonna give this a try with
@ajinkyadixit1991Ай бұрын
Hi, Its one of the best VTOL conversion I have seen ever. I am also planning to turn my nano talon into VTOL. Would you like to share FC parameters file (Ardupilot), So that I can convert my Talon in VTOL safely. Thanks in advance...!!!
@MariusIhlar2 ай бұрын
2:55 "Rest in Peace"
@ominousred3 ай бұрын
WOw. Great work.
@seanyfpv3 ай бұрын
Thank you!
@vinayselvaraj3 ай бұрын
Nice!
@seanyfpv3 ай бұрын
thank you!!
@Dedmuus3 ай бұрын
Thanks for making this. I can't wait to try this this weekend.
@KaanAkinAri3 ай бұрын
Awesome
@seanyfpv3 ай бұрын
Thanks Kaan!
@AndyYuTheLegacy3 ай бұрын
Wowowow
@seanyfpv3 ай бұрын
thank you sirrr
@cilok500an53 ай бұрын
Thanks dude now i know where is the fckn enter 😂
@morvedibile57734 ай бұрын
when i get into properties it shows me just a button and doesn't respond to any command, i'ts so frustrating seeing others just P&Play that easy... i swear i don't have any problems with drivers or so. can someone help me please (usb connection)
@nebo_sentyabria4 ай бұрын
Hey dude! Thank you for the video! One question - how do you switch to the first person view in PicaSim? I tried all the buttons on the keyboard, but none of them did that.
@seanyfpv3 ай бұрын
Hi thanks for the comment! and sorry for the late reply. Changing camera angles is with the 'C' keyboard key, but I think you might be in one of the non-3d maps, where it's just a panoramic background. Because those don't let you change the camera view. Switch to one of the 3d maps and see if it works
@nebo_sentyabria3 ай бұрын
@@seanyfpv , that works, thank you! "3D maps" was the key
@jimyu68744 ай бұрын
Please wear a coat with a hoodie
@surjitsinghdeo65334 ай бұрын
Hi, can you make a video about setting up a PWM RX with Radiomaster Pocket? I recently got a Radiiomaster Pocket and also an ELRS RX, and I'm unable to set it up. any help regarding it will really solve a lot of issues. Mainly im confused with what should be the input and mixes settings regarding channel 5 and how to set it to a switch ?
@seanyfpv4 ай бұрын
Thanks for the comment, I actually recently got the PWM so I can definitely make a video on it soon. For now try seeing if Painless360 or anybody else has videos on the pwm receivers?
@surjitsinghdeo65334 ай бұрын
@@seanyfpv thank you so much , will be eagerly waiting for it
@surjitsinghdeo65335 ай бұрын
Hi recently subscribed to your channel after your Radiomaster Pocket video. Good content. Can you show more of how you are setting up the plane before flying
@creativitecha-z5245 ай бұрын
How can i turn on ble joystick with cc2500 version
@seanyfpv5 ай бұрын
I don’t believe it has that functionality unfortunately, without adding an external expresslrs module
@MARIO012305 ай бұрын
Hi!! Can you share your custom stl files and the ardupilot param file? Thank you in advance!!
@sptrader63166 ай бұрын
Most VTOLs that I've seen, the motors rotate position. I like your concept more with fixed position, as you can transition faster.
@seanyfpv6 ай бұрын
yeah it's definitely a simpler implementation with this "4+1" setup, but results in a decent amount of "useless weight" when in forward flight. I would like to try out the tilting setups with a larger plane at some point
@tomasz.dermin7 ай бұрын
Motion blur is one thing - as the name suggests, it is motion blur and not shaky frames due to vibrations and long shutter speed. You should strive to eliminate camera vibrations and not extend the exposure time,
@ILLBEDRONED7 ай бұрын
Nice man ✌️😎
@seanyfpv7 ай бұрын
Thanks! Appreciate the comment
@Yngex7 ай бұрын
nah dude nahhhhh, first of all this video exist 100 times on yt no reason for the next HOW TO bla bla, the real problem is your quad its so insane off maybe fix that before
@seanyfpv7 ай бұрын
That's a fair point. It started off as just a compilation flying vlog but I wanted to include some commentary about things I learned and notice, true that there are a lot of other videos that explain it better. It was mainly a secondary thing. And true that you should make your quad fly well first, I was mainly focusing on the camera side of things.
@farkhodkhikmatov47387 ай бұрын
How did you giys tune it? What steps did you take?
@rexlalusin60507 ай бұрын
Y
@gouravaswal86367 ай бұрын
✅
@prateekshrestha98247 ай бұрын
Thank you so much for this video. I was starting to get a bit frustrated for having to pay after some point for Clear View and any other RC simulator out there. I am a cheapskate and wanted to spend exactly $0 for a flight simulator software :D. I use a FlySky FS-i6X transmitter btw, and the cable that comes with it works perfectly fine with PicaSim.
@seanyfpv7 ай бұрын
That’s awesome that it works! Yeah I used to have the FS-i6 as well and loved it, have fun flying!
@Todd_G_FPV6 ай бұрын
I like my old flysky but the range sucked! My 200mw vtx went alot farther than the rx/tx lol
@BooDevil657 ай бұрын
Perfect overview! Exactly what a newbie friend with a Pocket ELRS needed.
@seanyfpv7 ай бұрын
Thank you! Yeah this was my intention. I'll eventually make more videos walking through connecting your first plane, and then even flying with flight controllers!
@greg6697 ай бұрын
Whaaaaaaat the .. this is awesome
@paololonzi9 ай бұрын
Work with all the tx16s ? Or only mark ll ?
@seanyfpv9 ай бұрын
I think with updated edgetx it should work yeah!
@MrKyle70011 ай бұрын
That looked really good. I just did a first auto take off with one of my planes too. It works surprisingly well. its a little scary to toss that thing with no controls at first lol
@jcoyle556 Жыл бұрын
thanks for the video. I'm doing a Talon pro build with first shot at take-off mode. this answered a couple questions...
@seanyfpv Жыл бұрын
Glad it could help! Good luck with it! The talon pro is a cool ass plane
@bob9fpv Жыл бұрын
Give elrs a go its cheap and a solid link and cant beat the hota d6 for charging.
@seanyfpv Жыл бұрын
yeah i've been thinking about switching, i played with elrs a bit casually before but found the firmware updating to be a bit more cumbersome than crossfire, at least at the time. definitely willing to give it a second try though! thanks for the comment
@ebikefe Жыл бұрын
Thanks for sharing this video. Quick question - you mentioned after it armed (by shaking it) - how did you disarm it at 3:07 if the disarm switch didn't work?
@seanyfpv Жыл бұрын
I had to switch modes out of TAKEOFF and into Manual or FBWA, and it was able to disarm. Thanks for the comment!
@sventse Жыл бұрын
wtotoy moment
@seanyfpv Жыл бұрын
video link: kzfaq.info/get/bejne/nJeTZrenv6vPYYU.html
@polinaermoshkina4020 Жыл бұрын
Sick
@jameswang5594 Жыл бұрын
🔥🔥🔥
@DronerDan Жыл бұрын
Nice dude check out mine :)
@maybayson4203 Жыл бұрын
Auw?,im building atomrc dolphin
@seanyfpv Жыл бұрын
the total weight is 847g + 217g = 1064g (for plane + battery, respectively)
@seanyfpv Жыл бұрын
oh nice! the dolphin is an awesome plane, i've flown my friend's before. have fun! and thanks for the comment
@jozef4511 Жыл бұрын
Very nice build.will like to do the same.. can you please share your param file.. thanks 👍
@seanyfpv Жыл бұрын
sure i'll try to upload it somewhere and post it within a week or so, thanks for the comment and let me know if you have more questions!
@axieman6196 Жыл бұрын
Thansk, someday I will try it out with my brother
@axieman6196 Жыл бұрын
Thank you, very interesting video
@seanyfpv Жыл бұрын
thanks! appreciate the comment
@AerialWaviator Жыл бұрын
Great demo. Like the VTOL "to the moon, and beyond" climb out. (2:40) Thanks for including the build details. ♥👍 Can you include an AUW in the description? As curious, to how compares to typical wing build. Wing loading doesn't appear too high as fly's quite well, and as you mention hovers at 20% throttle. Nice work getting all the pieces assembled and working well together.
@seanyfpv Жыл бұрын
Yeah I'll try to get a weight within a couple days, I recently got into another crash trying to do a flip in hover mode haha. I will say it is quite heavy just cause of the additional vtol hardware, and the wiring and such is not exactly optimized, so it needs to fly decently fast to maintain altitude. Thanks for the comment!
@seanyfpv Жыл бұрын
sorry it took so long to get back, but the total weight is 847g + 217g = 1064g (for plane + battery, respectively)
@samcollins6394 Жыл бұрын
Hi do you have links to the stl files please 🙏🏾
@seanyfpv Жыл бұрын
yeah i'll add the links for the parts i got from thingiverse (in the description), for the custom ones I made, i'll try to have them uploaded within the week. Thanks for the comment!