I'm nearly certain this will solve my issue. I was trying allan wrenches but your shower handle looks just like mine. Thank you!!
@scottmccombs2012Ай бұрын
Very helpful. Thanks brother!
@AnchanetteSanchez2 ай бұрын
Best cap gun
@tbsmith19962 ай бұрын
Genius!! Same problem and same solution - worked!!! Thank you!!🙏
@dnielei2 ай бұрын
Praise Jesus, I gave up already, then had to try again since newborn baby can't stand the occasional cold shower. Your method worked, though I tried a bigger bit after almost completely drill through the set screw. Who in their right mind would design such a pain in the rear!? If you have a water softener installed, this is a must happen, since there is added salt in the water. PRL for your video! I was praising Jesus with my brother in law in the bathroom after taking out the screw. Haven't been this happy for so long!
@ryanbothof33752 ай бұрын
Thank you Jesus for this video ! Thank you for posting, saved me from the destroying half the bathroom trying to removed this screw.
@kimprofetto26032 ай бұрын
HOLY COW!!! THIS WORKED!!! Only I used just boiling water. Mine has been stuck for over a month. I boiled the water & poured over the button on both sides. My steam button is on the undercarriage of the arm. I took a knife & the button released with the first pull. I am soooooo happy!!!
@stevenmoomey21152 ай бұрын
Mine is Hex, but Metric. None of the SAE “Us” Hex are even close. Also there was a recessed cap, I had to remove using a Jeweler Screwdriver. I threw this away.
@mmetromm9963 ай бұрын
I just bought one with the same problem and my research said it is most likely a stuck valve. Put it in a warm place and let it sit there a while, then try to start it. We had a couple of warm days and it was in my shed. Guess what. It started in three pulls. I always start mine periodically throughout the year. That will most likely fix your problem.
@ernestosiqueiros11783 ай бұрын
Thank you. I couldn't see in there..
@ramoncastillo81223 ай бұрын
Thank you so much! Screw came right out, now I need to figure out how to remove the stuck handle 😂
@martinyuvkhimenko77554 ай бұрын
Thank you, it helped me, I lost over 286 Pound 😁
@Ki-Lessons4 ай бұрын
1. Thank you Anil 2. Moen - WTF is wrong with your engineers? 3. Thank you Jesus
@TheRealPenguinator4 ай бұрын
I believe muskets are more scary than modern firearms because you don’t know what is gonna happen with such an old weapon
@anilphilip5464 ай бұрын
Exactly right - it can explode in your hands. I don't understand how they still managed to win wars.
@jasonharris9965 ай бұрын
Unfortunately, on my American Standard shower handle, this didnt work for me. However, I ordered a new cartridge which comes with a hex key that fits right into the set screw. I'd gone from hours scratching my head to loosening the set screw in seconds with the hex key. If you cant get the set screw out and its not stripped, it might be better to get a new catridge/handle assembly from your tub's manufacturer and use the tool that comes with it for the set screw.
@slc37635 ай бұрын
You are wonderful!!Thank you! I wasted so much time watching other videos that didn’t resolve the issue and you delivered the fix in only 1:43 !!! (not 8+ minutes)
@elecktronbluegirl5 ай бұрын
Thank you for thanking Jesus and for this video! Exactly what I was thinking- that the set screw was stripped.. I am thanking Him too and hopefully I'll be thanking Him more when I fix it.
@user-jl1iz7rg2m5 ай бұрын
Ilove amerika!
@wiseserpent96 ай бұрын
Just a heads up, some set screws are a standard SAE hex and some are metric. If one doesn't work, try the other.
@denpaula6 ай бұрын
Thank You, I found an old T15 Torx screwdriver and came out easily. This was after much frustration of using my old Allen wrench set and no luck, than going out and buying a new Allen/hex wrench set with different sizes and still no luck. Than I watched your video and tried a T 15 Torx screwdriver and came out so easy. Appreciate you.
@Booer6 ай бұрын
this ia the most important video of the last three years and beyond. thank you for your time and energy
@kerrygibbs81986 ай бұрын
OMG, really????
@jons59766 ай бұрын
HELPFUL. I GOT MINE OUT WITH A TORX BIT AS YOU SUGGESTED. THANK YOU
@Rohloffmale6 ай бұрын
This was great! Thank you so much for this Tip!!!
@RBZ-16 ай бұрын
This was the 5th video I watched about removing a stripped set screw after I just installed a new trim kit and already messed up the set screw and was about to start trying a few methods. After seeing your vid I went to try once more but this time I tried hex bits, but they were too wide to reach the screw through the handle hole. So I tried a different allen wrench set from my same tool kit and soon realized the 2nd set had one that fit better than the first allen wrench set and the screw came right out 🎉 Literally just now finished and ran back here to Thank YOU and thank Jesus!!!!!!!😄😄😄🙏
@trikeshwarsingh49406 ай бұрын
Thankyou so much
@TheBirdGardenNB6 ай бұрын
I got it! Thank Anil!
@evelynsimmons76026 ай бұрын
👉 P r o m o S M
@customer75756 ай бұрын
Doesn’t look right. Prefer spinning rings.
@benaditrangiah7 ай бұрын
Thanku brother , saved me a lot of expenses.
@nuitNo.67 ай бұрын
True talent.
@matthewschlitz64557 ай бұрын
Thank you for posting this video! It saved me so much time and headache!
@bryanprince81847 ай бұрын
Thank you Jesus! T15 tapped in solved the problem in less than a minute. You are a genius!
@scotts41257 ай бұрын
The correct size is 7/64"
@yeseniawithlimelightbyalco80967 ай бұрын
My husband just yelled at me”Thank you Jesus” after I sent him this video and he followed your instructions. Thank you sooooo much for posting!!
@anilphilip5467 ай бұрын
Thank you for the encouragement. I needed it!
@curiousradish287 ай бұрын
Mine striped but will be trying this tomorrow! Otherwise new hands it is haha
@caswellanderson8 ай бұрын
Thank you. You saved me. I was about to drill it out. This trick worked!!
@nonebusiness73948 ай бұрын
Absolutely. This video saved me from some serious headache. The T-15 bit worked like a charm. However I did not have to hammer mine in. It fit perfectly and I had it out in a matter of moments. Yes agreed the thank Jesus part was the best
@jpablo7007 ай бұрын
Did you replace it with a new set screw?
@lceb918 ай бұрын
Dang I wish I would have watched this before I drilled into to.
@brunoespinoza86218 ай бұрын
Thank you very much for this recording! It would have been unfortunate if such moments were lost. Thank you also for the love you surrounded her with. P.S. It is worth noting how at minute 9:12 our beloved Laura looks gratefully towards God.
@johnojvind76418 ай бұрын
Her voice matured and got so strong she from now on can sing in spaces without amplification.
@blainetrain65759 ай бұрын
Your a lord send my friend
@spicynutjuice94489 ай бұрын
Unbelievably helpful, thank you!
@amigodosanjos10389 ай бұрын
Laura: seja isso : uma voz santa para sempre. Pela idade que tens nao vai acabar sua mocidade e terna jovialidade . Não vais envelhecer. Serás uma eterna mocinha quando o Mestre voltar. E assim viverás. 😊😊 seja feliz . Faltam só alguns anos. Serás uma eterna santa cheia de vida , alegria e bênçãos.
@georgev.precup60849 ай бұрын
Superb!!!😘
@davidhowell78849 ай бұрын
Oh my. Laura your beautiful ❤😂🎉😊
@carstenvibkhansen41569 ай бұрын
Great song and voice, but not so good kamera work.
@anilphilip5469 ай бұрын
Yes, the battery for my camera died and so I had to use my trusty cell phone.
@scandisamurai88999 ай бұрын
This was the same song she sung the very first time I ever heard her, the first time she was on America's Got Talent, when I fell in love with her voice forever!