Lmao i just got a maintenance tech position where ill be doing this so im watching it to feel ready
@Hardees9034 ай бұрын
Ate or 8😂
@scarletevans44746 ай бұрын
The video I didn't knew I need, before I saw it! ♥ I can't stop thinking about what type of lightweight conveyor belt one should construct on the Moon for transporting excavated moon rocks and dust, while trying to reach Moon's Crust (to mine different minerals). You want conveyor belt and construction to not take too much of space and weight, as all the equipment you can lift to the outer space is limited!
@tesfayealemu22218 ай бұрын
Hi
@brettservin439511 ай бұрын
Come teach 30 years experienced techs this please!!!! 🤣 🤣 🤣
@margcan Жыл бұрын
How do you order replacement belts, no good info on your website?
@alexmackinson Жыл бұрын
"Just a couple turns" Proceeds to turn 9 times
@brockmartin7875 Жыл бұрын
I Work at a waste water plant, we had issues with out belt tracking today and maintenance isn’t here on the weekends, this video helped me and my lead operator understand belt tracking and tension for our conveyer system. Although we have much bigger belts, we were able to adjust our tracking successfully. Thank you for this educational video!
@trendelectric4232 Жыл бұрын
Good work 👍
@lita7041 Жыл бұрын
Any conveyor maintenance service in L. A CA. Area???
@runbou3485 Жыл бұрын
Thankអរគុណ
@theconveyorbeltingguru4720 Жыл бұрын
kzfaq.info/love/gAlxq2y8A2gACTlnJVFH7g
@jzel85 Жыл бұрын
How do you deal with the question of Risk Assessments and people walking on a convveyor? Thanks.
@AhsanKhan-yp8xe Жыл бұрын
If anybody Requirement of convair very best price!…you can contact me..8178643608
@FanUtd5352 жыл бұрын
That belts too loose. His guide to tensioning is a joke. If you can get your hand under its all good????? Never heard that in my life and its quite frankly ridiculous. Belts have a optimal tension. Each belt is different but you do it the same way. First mark out 2 points for example 1 meter apart down the centre of the length of the belt. Then apply tension and measure the marks until they measure the set optimal tension. Depending on length, width and material type and application most belt require a extra 25mm of stretch for the small belts going upto metres of stretch in these big mining belts. All this info should be available on the belt manufacturer website. Also Don't get me started on how you tracked that thing. Trust me people he did what we all do ( I'm a belt fitter of 15 yrs) he just fiddled and farted about until it was good. Joking aside perfect central on all rollers tracking is seldom achieved and when it us its by fluke. Too many variants, cut of belt, how straight it the machine bed etc could go on my point is when taking a belt find the point where it naturally seems to stay( it'll never be smack bang in the centre) if you twiddle to much you'll be there forever.
@hillbillyherman7382 жыл бұрын
I have one that’s slipping under weight
@guide2track4602 жыл бұрын
There is no mention of it in this video, but at least one of the rollers must have been crowned (or conical-cylindrical-conical). Otherwise tracking will not work in this conveyor, with this belt. Probably the drive roller is crowned which makes sense (and is usually done) since belt tension is highest where the loaded belt enters the drive roller.
This is not a good design for a belt conveyor. It has major safety and practicality issues.
@nauratanprjapat39642 жыл бұрын
Hindi me samjana hai
@blancasoto25032 жыл бұрын
Hello, please watch Por Amor o Por Dinero!
@vannhutnguyen65522 жыл бұрын
can you share step file to i reference, thanks
@darsonosintang60392 жыл бұрын
Mantaap bisa untuk meringankan pekerjaan, 👍👍👍
@user-nx7bb8dq6y2 жыл бұрын
มีวิธีการขัดผิวสายพานเวลาเป็นร่องหรือหยาบไหมครับ
@jaredmayweather53933 жыл бұрын
It's hilarious to me everything on earth is leveled to be "FLAT" yet people still believe we are on a ball.
@doniciogutierrez16723 жыл бұрын
No entender nada ése idioma feo...
@MrNadirzenith3 жыл бұрын
Never track with tensenor. You warp the belt. You just need to track with snub.
@bradmol90162 жыл бұрын
Some conveyors don't have snub rollers. Tracking with the tail pulley (tensioner) is okay, but instead of increasing tension to make the belt go one way, it's better to decrease tension on the side you want the belt to track to.
@aktchungrabanio64673 жыл бұрын
This is super sensual
@muhammadkhan-uv6cp3 жыл бұрын
& how we will adjust the belt alignment if it has to run in both (reverse & forward) directions
@slownibbler3 жыл бұрын
trundle support +10 intellect
@prathmeshware89983 жыл бұрын
Sir please give me you whatsapp number i need your help in my college project
@prathmeshware89983 жыл бұрын
Sir there can you use 90° conveyor instead of these for tunning
@forrestchauncey28533 жыл бұрын
I would turn it on and tighten adequately then back and forth till it tracked dead nuts
Plz visit my channel kzfaq.info/get/bejne/ebeRjc15z5mzn4E.html for this machine
@rudharatrivedi27683 жыл бұрын
I will also salling all types of conveyors Belt Contact no.918003753452
@johnsonkhant63303 жыл бұрын
Very good
@alexminor96784 жыл бұрын
That might be the worst display of tensioning and tracking a belt I've ever seen. Never adjust your end pulleys before the snubber or return rollers
@cristinafuentes44774 жыл бұрын
La faja de que material es??
@Xpert454 жыл бұрын
John Kennedy? 🙄
@jeremyhall93464 жыл бұрын
Id fire your ass. Pull the belt tight then worry about it having equal tension. Youre acting stupid.
@leighduncan49894 жыл бұрын
Legend has it, that this guy is still tracking that belt!!!
@garcjr4 жыл бұрын
With the takeup roller.
@brettservin439511 ай бұрын
Why are you like this 🤣 🤣 🤣 🤣 🤣 🤣
@jaredkraus31232 ай бұрын
😂
@tobylou8Ай бұрын
For real!!
@thebackwoodsmechanic50294 жыл бұрын
Where can I buy a customer belt at, I need one for a old Wadsworth conveyor
@ftmcrusherbriquettemachine25843 жыл бұрын
here is China supplier. Get【Price & Details 】about 【Belt conveyor】Click: www.chinafote.com/belt_conveyor.html?lyy
@semmes53424 жыл бұрын
the snub roll is completely useless unless you use it as a take up for belt stretch over time it is not a tracking pulley ever! the tail pulley is always the tracking pulley and should be minimal adjustment but your drive pulley needs to be crowned for sure
@pacee21 Жыл бұрын
incorrect. tracking on your snubbing rollers is the primary method of tracking. the tension carriage should only be for tensioning and then minor adjustments in belt fluctuations if you haven't got a straight belt say. The guy just tracking on the tension end will invariably just stretch the belt and then eventually just cause seizing of the drive or premature degradation of the belt. Also tension checking may be fine with the method advised on small belts but any long / wide or heavy belts the check should be distance of return strand of belt to frame over return roller and then distance check of 1/2 way between both return idler sets. The distance sag should deviance should be 2% of the belt idler to idler distance i.e. 2m idler return set means sag estimate should be 40mm. small belts you can get away with this rough way of tracking but on longer belts you will cause major issues. Source: 10+ years installing quarry / logistics conveyors systems with belt runs of up to 150m
@semmes5342 Жыл бұрын
@@pacee21 a snub pulley is only used to create greater wrap around either the drive or tail pulley a snub it is never used for alignment its also normally hard to access. alignment is only made possible with a pulley that is crowned and has alignment bolts. Been doing this for 35 years
@semmes53424 жыл бұрын
did you crown the drive pulley for tracking? you should vulcanize the belt rather than metal lace the lacing will over time ruin the pulleys especially aluminum...lastly your snub roll should move vertically for belt take up
@guylmorin29854 жыл бұрын
Conveyors very seldom just start tracking off on thier own. Most often it is an outside reason for the problem. Improper loading, buildup on tailpulley, return/troughing roller(s) not turning, belt traveling over buildup on return side, seized trainer. List goes on. Inspect conveyor head to tail to find the reason before doing any adjustments.
@jacobkarlin61472 жыл бұрын
Mind if I pick your brain on a problem I am having about belt tracking?
@taylorsellers52447 ай бұрын
Also, seized bearings in the snub rollers or the end pulleys can also affect the tracking of the belt. As said, tracking is a very tedious and time consuming process
@jaredkraus31232 ай бұрын
Non V guided belts tend to wander quite a bit even under tension
@bubbacrumpton83534 жыл бұрын
What an idiot. You should be square with your take up. The only adjustment you should use is the snub roller for tracking. By having your take up not being square will cause your belt to stretch which will cause your belt to "walk".
@wilsturm94464 жыл бұрын
Do not use your take up pulley to track you will stretch one side of the belt and make it a nightmare to track down the line
@guylmorin29854 жыл бұрын
The say in school to not use the tail pulley takeup but in real life you have to use what you got. Some conveyors have very few options. Stretching the belt. Doubtfull.
@andytellmann13443 жыл бұрын
@@guylmorin2985 Wait, people go to school for conveyors?