We were not able to film it but we are building another scooter right now with a Crimaz conversion and we will film that one.
@Lamvesp4 ай бұрын
Great vid. Was wondering what the timings are and what size carb you've fitted. Thank in advance
@hotcago71974 ай бұрын
Thanks! It’s a Polini 24mm carb but I don’t know what he set the timing at.
@Lamvesp4 ай бұрын
Thanks for your reply. Just bought a 24mm Dell'orto for my 130cc DR cilinder and was thinking that it might have too big. It seems to work on your set up so you've put my mind to rest on that score. Thank you.
@hotcago71974 ай бұрын
@@Lamvesp yea I know he has had it up to 60mph and he said it felt like it had more.
@bluzzpower4 ай бұрын
Great Mod...I did it as well. My question is ,which foam inserts did you use on these slicks if so,where did you get them? Your Mods are off the Hook btw!
@hotcago71974 ай бұрын
Thanks! ❤️ I don’t have the foam inserts.
@ruifilipeoliveirapereira29274 ай бұрын
Can you tell me your set up? I am doing a project kind of like yours! I am using the same exhaust vmc evo big bore 60mm 🥰
@hotcago71974 ай бұрын
I put a list of the parts in the description. Let me know if you have any more questions.
@ruifilipeoliveirapereira29274 ай бұрын
@@hotcago7197thank you very much!!! I am using zuera vtr 145cc aspirated to cylinder! Same eletronic, carburator is betther dellorto 30 vhsh primary 27/69 and cluster with 3/4 gear short 10/14/17/21. Did you bored the carters for crankshaft?
@ruifilipeoliveirapereira29274 ай бұрын
Good job!!! Tunning needs pacience! Love the bike and the engine🥰🥰🥰
@3rreZ6 ай бұрын
Did you work the carter too?
@hotcago71976 ай бұрын
Yes we case matched.
@philipp.n6 ай бұрын
Very cool Lunchbox and a good how to do! But it is a differential delete like used on the real Monster Jam Trucks and not a Posi. GM Positraction is a limited slip differential. The wheels are still able to turn differently, until the speed difference goes too high. Then it starts to lock itself.
@hotcago71976 ай бұрын
Yes, you are right it would be more like welding a standard diff.
@Yesternow7 ай бұрын
Epic!
@hotcago71977 ай бұрын
Awesome Thanks!
@albertomoreno82307 ай бұрын
what happens in 2:00
@hotcago71977 ай бұрын
So Adam still needed to adjust the shifter cables and I think it was in between neutral and first and it jumped into first gear 😂
@supervespadude7 ай бұрын
Nice! I've been running the vmc super G on my Stella for a few months now and it's fast. First time I used VMC
@hotcago71977 ай бұрын
Yea, I’m very happy with the setup and price. My first one too
@theadventuresoflario7 ай бұрын
That's awesome... van looks superb, wonder if I could ask alittle advice. I've just put a sport tuned motor in mine, the motor spins, but I'm getting zero drive, almost like its not engaging. What am I doing wrong..?
@hotcago71977 ай бұрын
So motor spins. Is the motor gear aligned with the transmission gear? There is that plastic mount that mounts to the motor, from memory it would fit more than one way but if it was wrong the gears didn’t touch. Hope that helps!
@theadventuresoflario7 ай бұрын
@hotcago7197 yeah motor spins fine,..and correct, plastic mount is fixed on the motor housing, I bet its my user error., i thought it was going too well lol.. thanks for the reply, very much appreciated 👍🏼
@neilwaudby44198 ай бұрын
Where did you get those gold coloured engine bushes from?
@hotcago71977 ай бұрын
They are PLCcorse they are nice! I think you can get them at SIP also www.plccorse.com/?page_id=575
@theadventuresoflario8 ай бұрын
Alittle late to the party, im just getting my original Lunchbox back up and running with up to date parts, this is a sweet looking LB, those tyres are stunning, i noted you mentioned they were from RCmart, are they on the standard black LB rims? great little upgrade too. 🤙
@hotcago71978 ай бұрын
It’s never too late lol. Yes in that video they are on the standard LB rims but later I changed them to the chrome rims like on the Wild Willy. Thanks!
@theadventuresoflario8 ай бұрын
@@hotcago7197 cheers buddy... Can't believe how much things have moved on!... Have an original Tamiya Sand Rover to sort aswell..lol...
@Yesternow8 ай бұрын
Awesome stuff!
@hotcago71977 ай бұрын
Yes I’m very happy with it!
@kothakawruh9 ай бұрын
Hi man, what's your breaking lamp - turn signal?
@hotcago71979 ай бұрын
There are 2 bulbuls in the tail light. One is always on and the other turns on when the brake pedal is pressed. Is that what you were asking about? This scooter has no turn signals.
@scootech42699 ай бұрын
Great video. nice and easy to watch.
@hotcago71979 ай бұрын
Thanks!
@aureliocastillo56389 ай бұрын
Who at Disney actually approved this scene??😅😅
@hotcago71979 ай бұрын
😂
@niekdevogel4732 Жыл бұрын
Where did you get that spoiler from, I am serching for one for a while now.
@hotcago7197 Жыл бұрын
I don’t recall where or what brand it is (maybe Yokomo?). I know it’s for RC Drift I would do a search and check out what’s available. I did have to cut it so it was the width of the body.
@niekdevogel4732 Жыл бұрын
Thanks
@rclavier Жыл бұрын
hello, good job... which transmission did u installed?
@hotcago7197 Жыл бұрын
I believe he used a PX 200 as the donor.
@stang1991 Жыл бұрын
Legit question. What exactly is the point of doing this? Does it help or hurt the performance?
@hotcago7197 Жыл бұрын
Performance is probably a broad term. I did all of this to prove to myself I could take a non-RC drift chassis add more angle and drift on rubber tires. So it performs a specific task (not very good on off-road anymore). I have a first drive video with the stock tires on concrete with light snow and then in my basement (slick concrete) with slick tires. I was very happy with how it preforms the task!
@hotcago7197 Жыл бұрын
Also I suppose if you wanted to just drive very fast in a straight line it would also handle very well (probably would adjust suspension to do that)
@chE3z1 Жыл бұрын
Did you have to make any modifications to fit it? I read that the Stellas/LMLs have different plugs etc. that need an adapter for the SIP speedos.
@hotcago7197 Жыл бұрын
Need a PX speedo connector and splice it into the Stella harness. www.sip-scootershop.com/en/product/wire-kit-handlebar-speedometer_58296400?cr=e993ab67-6807-4109-bbed-f6374ebf9f9b&gclid=CjwKCAjw586hBhBrEiwAQYEnHQ5oQM_gJWBT7MyZkDea-3CT9ylNAgxrJXuaFkZZDxMjDNuVERMjLBoC37AQAvD_BwE
@SuperMonik Жыл бұрын
that'll scream more with nordpseed exhaust
@hotcago7197 Жыл бұрын
I don’t know what exhaust he is going to but he said he wants to change… I will let him know. Thanks
@perryknight9002 Жыл бұрын
*Promo SM* 💘
@Johnduvuk Жыл бұрын
Can you buy the locking diff on ebay?
@hotcago7197 Жыл бұрын
I got it from AmPro Engineering on Shapeways.com.
@estire1983 Жыл бұрын
MOM HE IS COMING WITH A DEAD BLOW
@Chris-construction Жыл бұрын
Music ruined it for me
@RdCrestdBreegull Жыл бұрын
this is so great
@JandG-2.percent.Vespa.tuning Жыл бұрын
Bravo, I like the video ! And now I subscribe to your channel Buddy. Soon a video of the conversion 208 system for px125 block ;)
@hotcago7197 Жыл бұрын
Thanks man! 😉
@franklinmint7394 Жыл бұрын
You have a great working area
@MyPanos1979 Жыл бұрын
Hi.Grade job.I hope you enjoy it at the road. I have one question. Did you convert it to reed intake or not? Thanks in advance.
@hotcago7197 Жыл бұрын
Thanks. Currently it is not reed but that is probably coming.
@LowestDifficulty Жыл бұрын
DUDE!!! SICK BUILD!!!
@hotcago7197 Жыл бұрын
Thanks!!!
@faldistanley703 Жыл бұрын
What's stroke do you use for the crankshaft?
@hotcago7197 Жыл бұрын
It’s a 60 stroke
@scootervixen Жыл бұрын
01:51 That's me ScooterVixen lol nice vid
@hotcago7197 Жыл бұрын
Thanks!
@yangsjayaofficial Жыл бұрын
Wow, the power is really good, so I want my Vespa to be approved like this, greetings of friendship and greetings to the right engine from Indonesia 🤝🇲🇨🙏
@hotcago7197 Жыл бұрын
It’s a lot of fun to ride
@zoridor16 Жыл бұрын
Nice upgrade! And very cool potenza tires!
@gda882002 Жыл бұрын
killer
@limburgsestaat2194 Жыл бұрын
guy is driving on a vespa with an antifascist sticker. Ironic.
@piamuk Жыл бұрын
o I’m sorry, does Antifascism offend you?
@Nordlicht05 Жыл бұрын
Wow this is a tweaked out lunchbox.
@hotcago7197 Жыл бұрын
Yes, it has been through a couple changes lol. I’m thinking there may be some in the near future, maybe.
@RobertMcInally Жыл бұрын
Looks great fun 😎
@hotcago7197 Жыл бұрын
A lot of fun!
@neonafterlife Жыл бұрын
as soon as that song dropped , the like button was clicked
@IowaBudgetRCBashers Жыл бұрын
Great upgrade
@hotcago7197 Жыл бұрын
Yea I like the it drives
@vespaenthusiaststimlisah.2 жыл бұрын
Nice job on your video!
@hotcago71972 жыл бұрын
Thanks a lot!
@Thor5555552 жыл бұрын
which exhaust did you use? is it the sip road or is it the good old first one from PEP Parts?
@hotcago71972 жыл бұрын
It’s the sip road 2
@MrC29582 жыл бұрын
Do you by any chance have the parts list for this conversion?
@hotcago71972 жыл бұрын
I listed the parts I used in the description but I don’t have the part numbers. A lot of those parts are discontinued also. The front lower arms/knuckles would be the same as on a Yokomo YD2 if that helps.
@scootervixen2 жыл бұрын
That's me with the Freddy Krueger 2:17 lol
@hotcago71972 жыл бұрын
I remember! Was he a typical back seat driver 😂
@GyuHobbyRC2 жыл бұрын
good !!! great enthusiasm applause. 👍👍👍👍
@hotcago71972 жыл бұрын
Thanks!
@alexmerkeezy2 жыл бұрын
the color change was sweet. Better Call Saul vibes ha
@hotcago71972 жыл бұрын
Haha love that show
@MarcoLopez-wy6zx2 жыл бұрын
Running video please!
@hotcago71972 жыл бұрын
Here ya go. kzfaq.info/get/bejne/o8iKndGgnq7doKc.html
@amakhis2 жыл бұрын
With this brushless combo, do you have to modify the transmission gears or it is the plastic ones from stock ? (locking differentials is a mandatory for this conversion or not ?)
@hotcago71972 жыл бұрын
I did not modify the transmission gears and no you do not need to lock the differential.
@RCBirds2 жыл бұрын
Awesome. Ampro's doing great stuff. Your box is running good👍
@hotcago71972 жыл бұрын
Yes, he does have some cool stuff! Thanks, I can’t wait for it to get warmer so I can drive it more!