Good job buddy I solved the problem with your video and I have to THANK YOU so much sir
@chrsrans13 күн бұрын
High Nuno, I have the metal filings in my pump, I’m waiting on a good used pump to arrive, and I have purchased a set of reconditioned injectors as 2 of mine were faulty. Can you give me any advice on cleaning out the fuel lines and fuel tank etc. lots of people are say to replace everything with new parts which seems crazy, surely there is a way to properly clean everything. I was going to flush the lines through with clean diesel an compressed air, maybe use brake cleaner on fuel injector lines. Can I re use the rail and injector lines if I can clean them somehow. Thanks for any advice you can give, Cheers, Chris , Blackwood, south wales.
@axores203 күн бұрын
@@chrsrans1 hello mate. Yes it's a good start to clean the fuel lines. But you don't need to clean the fuel line before the fuel filter. After the fuel filter you can clean them. Any metal bits coming from the tank will be trapped by the fuel filter. A clean diesel or brake cleaner should be perfect. Now i would recommend cleaning the rail very well. Any metal bits could damage your new injectors. Bleed the system before starting the vehicle. If you follow my videos about this matter you should be fine.
@chrsrans13 күн бұрын
@@axores20 Thank you so much for the fast reply, there are so many other people out there saying to replace everything in the fuel system with brand new parts that it’s was making me doubt myself and my capability’s , you have given my confidence a boost, thank you again. I will now clean everything to a high standard, good luck. Cheers Chris.
@axores203 күн бұрын
@@chrsrans1 you don't need replacing with all new. I never did. Just clean well. All those cars are still running strong 😊 any questions please ask. Good luck 👍👌
@glenspence60164 күн бұрын
Where is part 4????
@HowToSaveMoneyOnCarRepairs5 күн бұрын
Can you do this Job with a Bag Full Of Spanners...? If not we need to sign a petition and submit it to Volkswagen...! 🤔🤔😇😇
@axores204 күн бұрын
Don’t think so, lets sign one now 😂
@paulclifford44699 күн бұрын
Excellent content thank you very much
@georgealex1910 күн бұрын
I think mine doesn't work, but the P/S lamp is OFF... any clue?
@Tiwey13 күн бұрын
pls change your oil every 10000km. longer intervals kills these engines
@modmod39217 күн бұрын
Why Dealers are called Stealers
@messageobliquespe10017 күн бұрын
Victor Meldrew
@dannyharty365618 күн бұрын
It's not a strange problem It's audi or vw problem 1.6 diesel s**t
@danielarvinte168028 күн бұрын
Hi I have a Renault same have cold bad start and I been menu garage recode injectors and still doesn't work. We're u are based in UK ? Can I bring the car to you?
@axores2027 күн бұрын
Close to bath and Bristol. I will be a mobile mechanic soon. Which is your location?
@h_ea29 күн бұрын
Hello there mate my mark 5 golf aftermarket sensor has gone wrong has a constant beeping once put in reverse I’m trying to turn it off permanently how do I do it the sound comes from the passenger side under dash
@tommyboi0Ай бұрын
What country are you in? Also probably could use muricacid to clear it out
@axores20Ай бұрын
United Kingdom. Wd40 or another spray should be fine. Brake cleaner etc.
@tommyboi0Ай бұрын
I wish you would have shown how the sensor was reading before and after. Other than that this video was perfect!
@axores20Ай бұрын
Will not read anything. 0 basically mate.
@tommyboi0Ай бұрын
@@axores20 Okay so it just looks like a dead sensor? Mine still reads But I have all the same symptoms. I replaced the fuel map sensor or turbo boost sensor I guess it's called and no change it refuses to go into regen
@tommyboi0Ай бұрын
So my diff pressure will read 0.14psi at idle and my offset diff pressure will read 0psi
@axores20Ай бұрын
@@tommyboi0 if you press throttle does that number changes?
@tommyboi0Ай бұрын
@@axores20 it does, yes. I just used MAF cleaner and it worked for 15 miles so it looks like I have my answer! For the record it wasn't very far off and yet here we are lol. Something to keep in mind if you run into it again. Engine CJAA for what it's worth
@CgethsemaneАй бұрын
I have a question. So I replaced the high pressure pump and cleaned the fuel thank also the injectors but still no pumping pressure to the injectors and yes the low pressure pump works
@axores20Ай бұрын
Did you use a scanner to prime the pump? Snap on autel or bmw software is needed for that.
@Lesterslaser01Ай бұрын
Great video Nuno, I’ve just done my 2019 Mondeo ecoblue !. Got all four genuine filters off eBay from Germany for £127. Delivered !. Or if you contact your local parts plus network they were £150 !
@ivorainho81Ай бұрын
Nuno, como te posso contatar para reparar um carro?
@axores20Ай бұрын
Olá. Através daqui você consegue mandar mensagem por email 😊
@ivorainho81Ай бұрын
@axores20, so fazer reply? Era pa ser oculto😅
@ivorainho81Ай бұрын
@@axores20onde estas localizado? Precisava de mudar a timing belt de um c3 1.6hdi com 140000m. Obg
@axores20Ай бұрын
@@ivorainho81 tem manera de responder privado. Tem pessoas que conseguem mandar email por aqui. Sou perto da area de Bath e Bristol
@HedgeyOfficialАй бұрын
Just upgraded today, was paying £40 a month as I was out of contract for super fast and they upgraded me to £33 a month then when I asked if they had a new router as it’s the same one I had since 2018 they offered me WiFi max gave me a bigger discount now for £32 a month then said that I have a dead spot in my flat and they said if I have issues with the signal on the new router they said to get in touch and they will send out one of their pods free of charge, I thought that was weird but now seeing this and that a lot of people are having this issue it makes sense now they are doing it as a solution to the signal strength issue. Over all I’m paying £8 less a month with a newer but maybe worse signal router so can’t complain with that. One thing that I’m left perplexed by is why they don’t contact existing customers to offer this before contracts to keep people when they clearly can offer good deals to existing customers as well as new ones blows my mind.
@seankirby2580Ай бұрын
Excellent. Thank you. Not quite so scary to change the HPFP as I had thought. Very grateful.
@seankirby2580Ай бұрын
This was fantastic. Just what I need because I'm gradually working my way through the problems. I think I have a faulty suction valve regulator on the High pressure pump but i've changed the EKPM pump control module (low pressure pump), the fuel filter, done a leak-off test and changed an injector as well as the fuel regulator on the common rail. Very hard to identify exactly where the fault is. Thanks very much.
@Paul-fo5ghАй бұрын
Nice work, thanks for sharing 👍…Best change my oil soon ! Having said that an oil change won’t stop those plastic rails from failing. Worse thing on mine is the clutch… horrible grabby action apparently it’s a common fault.
@drtoxiccookieАй бұрын
new hub iss wifi 6 and WPA3 so way more secure then your old one and your normal person so default security is fine, these hubs are made on mass for mass use. best hopes are always paid ones from third partys
@DJT-nu7fvАй бұрын
I'm with Sky 7 years and recently had to get a replacement router from them and basically no WiFi in my home now. They even sent out a booster (never needed a booster before) and no difference at all. Quite obvious they've downgraded the tech in the new routers to previous models.
@axores20Ай бұрын
And guess what, on my video the old router, is the one i use again. The new one from the sky failed. Useless company
@HJBDefinitelyАй бұрын
Wow! The router flew down from the sky!
@bence_7616Ай бұрын
I bought these chinese sensors too but they leave lot of spaces so doesnt even help at all
@dariuslouw8653Ай бұрын
Cool job. Thanks for the video
@LykeArgy2 ай бұрын
Taking out the 40amp fuse gets the P/S to go away and steering to work for a few rides, so does taking off the battery for a few hours, I want to know if this fix lasted after this video or it only worked cause you disconnected the battery for a few rides ?
@axores20Ай бұрын
The battery didn't help on this fix. Battery disconnected after connect back last 1 minute then gives error again. Since that video the car still drives with no problems. I service this car every year. The clutch was replaced last year also. Happy days 😊
@LykeArgyАй бұрын
@@axores20 Ok, thank you so much for the response , i'll get it done first free day :)
@LykeArgyАй бұрын
@@axores20 i soldered everything and it worked for 2 days, it's bad again =( , how much do used ECUs cost from where you order if you know? They asked 160€ from the junkyard ...
@axores20Ай бұрын
@@LykeArgy hi. Are u sure you solder everything nicely? Also is good after that procedure to recalibrate the angle sensor. Connect a diagnostic tool and perform it. Should help.
@LykeArgyАй бұрын
@@axores20 don't have a tool but the solders seemed fine to me, i'm no pro tho, that was maybe my 5th time soldering, i could take it off and get it to an electronic repair shop to have them solder it 100% properly but who knows if that would fix it, it could be that one of the parts are damaged, i didn't see any burn marks tho
@wolfcalledloneliness18622 ай бұрын
Focus st diesel engine died while driving rac mechanic says timing belt had snapped . New engine or re-build ? Todays labour costs are soaring. Uk based if anyone has been quoted for a rebuild before . Car still need to be inspected as its just happened
@axores20Ай бұрын
No engine rebuild. Just replace the rockers. Check for no damage on the camshafts. New timing belt kit and also you will need to replace the chain and tensioner. New injector seals. Job done 😊
@UnluckyDomino2 ай бұрын
Do you have FTTP or FFTC?
@axores202 ай бұрын
It's fibre but to the exchange. Then i have normal wires coming inside the house. But here is the issue with wifi. Not good enough.
@UnluckyDomino2 ай бұрын
@@axores20 im getting the Max hub with my Gigabit FTTP package. Does it have WiFi 6? What were the speeds like?
@devsda12 ай бұрын
I’m surprised you got the Q hub because that was replaced with the Sky Broadband Hub a long time ago. I have the Sky Broadband Hub which looks like the Max Hub but in black colour and has 4 Ethernet ports. Never had a problem with it as of now. I can’t even get the Max Hub if I wanted to because I have a gfast connection and the Max Hub hardware doesn’t support this kind of connection. I also heard the Max Hub’s features are more limited compared to the Broadband Hub.
@kreemkrackered37552 ай бұрын
Got my router yesterday - arranged to return it today. Absolutely no difference to wifi strength at all. In fact, it was worse.
@axores202 ай бұрын
Just a way to get more money from people. It's not worth it.
@apollonchristopher51302 ай бұрын
VHello,have a Citroen C4 1.6,vehicle show antipollution fault and sometimes idle high,change upstream oxygen sensor as per diagnostic report,and now at cold start car vibrates,misfires,show antipollution fault and fan runs,switch off engine,fan still running,switch off engine,disconnect battery and car fault disappear and running fine,can someone help me? Thanks
@axores202 ай бұрын
Anti pollution is down to a misfire. Have the spark plugs been changed? Did you check the scanner if it shows any cylinders misfires?
@apollonchristopher51302 ай бұрын
@@axores20 Hello,thanks Nuno,I recently changed the spark plugs since 3 months,there was misfire on cylinder no2,injector no2 fault,replaced injector,still fault,technician did compression test on it and said was ok and they replaced the ECU in December and was ok and after 03 hours intermittent misfiring,asked me to replace upstream oxygen sensor,but now only at cold start the vehicle misfire,the antipollution fault appear,the fan run
@lawrencewilliams14772 ай бұрын
WORST CAR EVER MADE ABSOLUTE RUBBISH 🗑 FACTS OF LIFE FOLKS
@axores202 ай бұрын
Not a fan of BMW. Most of them are unreliable.
@paulshrubb9542 ай бұрын
Sky broadband is poor anyway
@axores202 ай бұрын
Cannot agree more 👍no respect for loyal customers
@OKuusava2 ай бұрын
Hmm, never got the part 2 video done?
@axores202 ай бұрын
Hi. No I didn't need it. The video did explain and the problem was solved. Do you need anymore information? Let me know what you are looking for. Thanks 😊
@tomislavrak52122 ай бұрын
Hi, did you figure out why was it shaking on idle, i have the exactly same engine and problem, sensors are good, high pressure pump is good, yet the pressure in the rail oscillates between 100000kPa and 300000kpa
@axores202 ай бұрын
Hi there. Has the fuel pump regulator been replaced? They can fail. Also how is the health of your dpf filter?
@mlze202 ай бұрын
My mondeo is keyless and wouldn’t go in service mode so this video helped massively, I couldn’t understand why the old inner pad had worn at an angle? And not evenly like the outta pad but new pads are on and all working great 👍 thanks for the insight
@axores202 ай бұрын
Sometimes the person before fit the pads without cooper grease or maybe bad quality pads. Thanks for watching and happy this video keeps helping people. 😊
@kevjdm19862 ай бұрын
Hi can you remember where you got the timing tools from?
@axores202 ай бұрын
386971256115 ebay item Above flywheel locking tool. You really need that to remove the crank bolt. Camshaft you can use 6mm drill bit to lock it in place. 😊
@charliegeorge.3 ай бұрын
Where you located? Need these on my Honda Civic 03.
@axores203 ай бұрын
Bristol area 😊
@axores203 ай бұрын
@@charliegeorge. Hope you find someone to do it for you. Thanks for watching 👌😊
@user-ef2px4xb8d3 ай бұрын
Is the solenoid a check valve to prevent oil return to the sump.
@user-ef2px4xb8d3 ай бұрын
Check the crankshaft end float
@user-ef2px4xb8d3 ай бұрын
Oil filter torque is crucial on these engines. Sometimes the filter does not seaĺ well.
@axores203 ай бұрын
Yes but torque settings is not that much on these pumps. I believe the valve was letting too much oil out thats why pressure was too low on idling. Interesting new pump is working great. But the previous pump lasted 4 years according to the owner. Let’s see this one how it does.
@dghackett583 ай бұрын
Very good tutorial but I would have liked to see an axle stand in use.👍👍
@axores203 ай бұрын
Me too. But i do trust that jack. If i will go under the car then i use an axle stand 😊 thanks for watching 😊
@tiago2994me3 ай бұрын
Thanks Nuno for sharing your work. This video helped me so much switching my fiesta glow plugs and fuel filter. You were also talking about misfires be related to the timing belt not being synced with the pump. I can’t say which pump you were referring but I got it swap buy a professional (timing belt) and, can be coincidence, my car when fuel is low at 100km/h or higher it starts misfiring a lot. I will be back updating if the new Bosch fuel filter helped on this behavior
@mircealingurar59373 ай бұрын
I had the same issue same car 2016 galaxy
@s.t17323 ай бұрын
My mondeo wouldn't go into service mode and this worked perfectly to wind the rear calipers in. Thanks 👍
@colin50643 ай бұрын
Hi, just tried the HPFP connector disconnect on my VW Golf Mk 6 1.6 tdi, and try to start the engine. It will not start no sign of life. My engine has a 1.6 TDI CAYC HIGH PRESSURE FUEL PUMP P/N= 03L130755E This is the Continental brand type. This appears to be totaly opposite to this VW 2009 Tiguan which appears to have a different HPFP fitted maybe a Bosch type.
@colin50643 ай бұрын
No real fix hear just speculation,good to know but bad high pressure fuel pump sensor connection not confirmed.
@danijelcar51843 ай бұрын
Great job done on that work on timing chain,i see that aircondition hose is like baloon almost gone 😎👍