Nice safety squints 😂

Wooow well I'm a girl and first timer on this and scare it was expensive and low budget so wish me luck 😢😢😅😢

Posts?

Thank you buddy

good info

great videos, but just to be clear, when you "install the post sleeve over the 4x4 framing" , there is a 4x4 post already set in place, correct? I only ask, because it isn't visible in the video. How long(tall) are your 4x4s? @ 0:40, you can see space at the top of your post sleeve, so wondering if your 4x4 is 37" or 36" or what, as it's clearly not the same height as the post sleeve.

How bad does your life have to be to get a squirrelly tattoo on your neck. It's just silly looking.

Question: The inside dimension of the sleeve is 95 mm ( rib to rib) and the 4x4 post size is 89 mm (3 1/2” x 3 1/2”). Once you insert the sleeve on to the post, there is a gap of 3 mm [(95 - 89)/2 = 3] all around between the sleeve and the treated wood post. When you attach the RSB to the post, the sleeve has to compress that 3 mm in order to touch the post (from both sides, if brackets are attached on both sides of the post). In my opinion compressing composite sleeve by a total of 6 mm (3 mm on each side) is not good. Don’t you have to put 3 mm shims between the sleeve and the post before you attach the RSB to the post?

Thanks for the great tips!

Your camera guy sucks.

Are you extending your post above the deck and making cuts in the decking to fit around the post ,or are you installing the post on top of decking material ?

Something is missing. The black channel that goes inside the railing.

Where did you get those brown post from?

Very good video. What TREX color are the posts and upper and lower cross rails? Thanks for sharing this video with us.

i dont like dinosaurs

What holds the post sleeve in place? The 2 screws thru the bracket into the post ? Are they long enough to get into the 4x4 wood?

no safety glasses on the mitre saw made me wince-yikes! Also, if I understood correctly, you were suggesting taking 1/4" off each side to accommodate for the gaskets that cover your cuts-this would be way too much and would prevent the desired snug fit-I usually suggest 3/16 total or 3/16 each side. Great video and keep up the good work-but safety never takes a holiday!

What brand of hidden fastener is being used?

Great but the plumb of posts was glossed over.

Can this product be used at angled patio entry stairway areas

You needed to explain better. More detail to your explanation.

Great safety squint using that saw.

its not that easy men, dont make others make mistakes

What screws are used for going into the composite sleeve through to the wood? I know they come in the package but want to know what they are if I need additional.

How did you install the trim ring?

How do you install the post on the stairs? I am using metal stringers. Thanks.

No Thank You very much!

My composite Trex decking nightmare kzfaq.info/get/bejne/fplmnJuXnJ6Wc3k.html

Does not tell you how to determine angles for top and bottom. Worthless.

Hey camera guy. Stop centering your frame on the dude talking. Nobody gives a shit about him, we want to see the work!

Doing this tomorrow Thanks for the summary.

Can you come to Columbus Ohio and build a small landing, 4 steps and rail? Cannot find a contractor.

How sturdy are these railings will they hold with someone leaning on them?

This was very helpful! My house has concrete front steps that a previous owner covered with wood. That wood is now rotting. I was thinking of recovering the steps with trex/composite. I watched your other video on the post install but I won’t be able to use lag bolts for my posts (I’ll be stuck securing the 4x4 to the concrete). Do you have any suggestions on the best way to handle this project? Can I just use sleepers laid on top of the existing concrete like the previous owner did?

The divider board with the lumber on the flat… Would you suggest putting Joist tape as water will sit there?

Put a little soap on those ledger lock screws, saves your impact some and makes things smoother. Thanks for the video. Always like to see how other guys do it.

As an installer, I even learned a few things from this video. Thanks bud.

Great video the best explain how to install, thanks for sharing

Thanks for the video! Is it possible to install one end of the railing directly to the house structure using the rail brackets?

great vid... thank you! Do you have one for trex railing for stairs?

You havs a video on lnstalling post on a concrete porch? Thks...jc

You left out the most important steps.....installing the post and the sleeve....jc

Maybe hire a better videographer for your next video?

Concise and informative. Thanks.

Excellent; it hits all the high points without taking a half hour! Thanks.

Golden

So the round balusters should not be moving correct or able to after you adjust?

I haven't installed this. You skipped the first step! What is under that post that attaches it to the deck? That's the one thing I wanted to see. And how to attach before the trim.

Why did you not install the black anti rattle strips? They are packed with the infill kit that was paid for. Many people will get mislead thinking they are for glass and not use them.

Great videos. Decided to replace my 20 year old deck boards and railings with trex boards and composite railings. These videos were extremely helpful. Thank you. Side note: I went and bought those timber lock lag bolts and was a bit skeptical. After installing the first post (as per your installation instruction), I was amazed how sturdy they were. Thank you.