no warning that silo cutters and grab forks do not allow you to pickup silage? for shame.
@CmpmpКүн бұрын
Un proportional as yo head
@aidanacosta591213 күн бұрын
Where u get the head lights from
@aidanacosta591217 күн бұрын
What light are those
@SN6SprtnNble620 күн бұрын
Been my go to video for this project, been extremly helpful, one question tho, at 2:00, where does that red wire specifically come from, from the adapter or the radio connectors or does it not matter
@Adwill30020 күн бұрын
How much was this build
@Adwill30021 күн бұрын
Where u get the headlights
@-007-225 күн бұрын
Just so you know: Fuses are sized to protect your wiring. The idea is for the fuse to pop before your wires start melting. You can't just "pop a bigger one in there" if your fuses are popping, otherwise your wires could start melting. You have to select the proper fuse based on your wire gauge , and you select the proper wire gauge based on your circuit's current.
@chanpre246426 күн бұрын
Nice quad for an 88 my 88 has no front plastics and has trailer fenders for fenders , I don’t get why you’d put the snorkel in the front though right in the middle of your field of view
@kyriaswartz5331Ай бұрын
I don’t have the long red wire. What can I use instead to connect to ac?
@anthonypalomino6413Ай бұрын
You can do it the right way by buying the harness and brackets. Don’t be like this guy
@r3ddog700Ай бұрын
Did you rattle can your racks or powder coat?
@LeviAinsworth-gq1foАй бұрын
How did you get the lift i cant fine one
@imemovengeanceАй бұрын
Who built the A-arm lift?
@birddsp1445Ай бұрын
Where did u find that harness bro
@foxdiaz45962 ай бұрын
Can do this on a gmc denali 2004?
@mikehunt89682 ай бұрын
Bare terminals on batteries inside a metal container???? Recipe for disaster!
@kawijedi40432 ай бұрын
gangsta rap! lol
@TheOGNuke12 ай бұрын
Man I’m super late to this vid but this has got to be the stupidest question but how did you do the top part I wanna do something similar but can find what that board is called but it looks really clean
@ferleo58333 ай бұрын
very good about everything mostly about the wire ignition power because gm does not have power ignition.. we have to wire up to another source 12 volt power ignition. congratulations you make everything easy while others does not explain well and make them harder.
@pewpew-_-21573 ай бұрын
My truck doesnt have the wheel huttons but i do have a new radio like aftermarket wit a screen can i wire the buttons from the wheel to control the radio with the corresponding buttons?
@ethanterrell18323 ай бұрын
Where did you get your A Arms ? Or is that still stock arms ?
@dustingeorge3162 ай бұрын
Not stock at all completely custom
@hurstshiftin98733 ай бұрын
Horse and buggy retro 😅
@kylewilliams33063 ай бұрын
Where can I get a dermel tool like the one you have that cut 6.5 round speaker holes out of plastic ammo box?
@Socal-17763 ай бұрын
What was that blue thing that you connected to the red wire?
@kylewilliams33063 ай бұрын
What is the product dimensions on thoses speaker ?
@Adwill3003 ай бұрын
What kind of lights do you got on it
@GageHeuerman3 ай бұрын
Where did u find the rims at
@Redneckfabelase3 ай бұрын
We’re did you buy the a arms on the front 300
@kylewilliams33063 ай бұрын
I saw this speaker on amazon PLMR60W and saw that the Product Dimensions are 7.4 x 7.6 x 7.1 inches and I wanted to know if they would fit on the plastic ammo box with this 15.75"L x 8"W x 10"H ?
@casonray3 ай бұрын
I’m not sure if that, just would have to measure and see. I don’t have a plastic box I could measure unfortunately
@kylewilliams33063 ай бұрын
@@casonray have you thought about doing a plastic ammo bluetooth build with 6.5 150watt marine speakers?
@kylewilliams33063 ай бұрын
@@casonray who would know if the speaker dimensions are 7.4x7.6x7.1 what the plastic ammo box dimensions should be to fit that dim speaker on the plastic ammo box?
@Intwodeep9024 ай бұрын
Tips to stop the door chime after the install of an after market radio
@zackerypollock98394 ай бұрын
Who’s building your new lift I need one for mine you said that name a little fast 😂
@dylangilpatric35884 ай бұрын
No help thx
@polaczekxd22054 ай бұрын
my cart doesnt stay at the start, how to fix it i am playing on 1.18.2
@kylewilliams33065 ай бұрын
What plastic toolbox should I get for 6.5. 1/2 speaker to fit on the front and have a small 2ch Bluetooth amp and 12v 6000mAh rechargable battery fit inside?
@chadcmb5 ай бұрын
Light green pos Dark green neg
@tylerolaughlin51405 ай бұрын
If not the darker color the negative usually has a black stripe on it
@hunter_trx4005 ай бұрын
Huge fan love the bikes and videos
@casonray5 ай бұрын
Hopefully soon I will have another video out!
@jonedmondson83875 ай бұрын
Just bought my 11yr old a 300, it’s stripped down, and I’ve used your videos for some tech inspiration
@casonray5 ай бұрын
I appreciate it! I never know how in depth to go with the videos, but I try me best to at least relay enough. They are amazing Fourwheelers!
@MrFutch085 ай бұрын
whens the new video popping out for it
@casonray5 ай бұрын
Motor is still being built, ran into a few issues but it’s coming along! Once I get that motor I’ll make a video
@MrFutch085 ай бұрын
@@casonray ok i’m looking forward to it, and i loved your copper bike build in fact im trying to build mine like that
@casonray5 ай бұрын
@@MrFutch08 I actually have an update for that one coming soon! It’s the last missing piece to make it 100% complete
@MrFutch085 ай бұрын
@@casonray oh nice i’m looking forward to it
@casonray5 ай бұрын
@@MrFutch08 you working on yours now?
@skylawalter8895 ай бұрын
I have the digital display. Which wire would I splice on?
@casonray5 ай бұрын
I would buy the interface wire harness. It’s all plug and play.
@skylawalter8895 ай бұрын
@@casonray on the blue plug for the climate control it is the brown wire still. I said screw it and it worked.
@skylawalter8895 ай бұрын
I got mine to work. On my model it’s still the brown wire but it’s in on the blue harness going to the climate control.
@Kashton-Johnson5 ай бұрын
Wow that looks so cool
@Elijah-sc9be5 ай бұрын
Thanks bro the same truck it’s perfect
@Morboeatspeople5 ай бұрын
Thanks for the quick visual for headlight removal! I just got a 12" light bar with two 4" pods for $37 on Amazon; gotta love clearance sales. I wanted to put the pods in place of the factory lights but wasn't sure how difficult it would be.
@kylewilliams33066 ай бұрын
What plastic ammo can should I use for 6.5. 1/2 150watt marine speaker ?
@casonray6 ай бұрын
I am unsure. I haven’t done a plastic one. Just grab a tape measure and go to academy or a local gun store and see what looks like it will fit
@kylewilliams33066 ай бұрын
@@casonray do you know anybody that’s done a plastic ammo box build with 6.5 1/2 marine speakers
@casonray6 ай бұрын
@@kylewilliams3306 I do not, but you should give it a shot
@kylewilliams33066 ай бұрын
@@casonray if you had to build one with 6.5. 1/2 150watt marine speaker white.which plastic ammo box would you go with that you would think that big enough for those speakers to fit on the front . 30mm 40mm or 50mm plastic box?
@kylewilliams33065 ай бұрын
@@casonraydo you know any body that has done a 6.5 1/2 150 marine speaker on plastic box with handle
@kylewilliams33066 ай бұрын
What size plastic ammo box should I go with 30mm,40mm 50mm for 6.5. 1/2 Marine speaker?
@THECHEVYGUY.6 ай бұрын
Looks amazing love the music that is one of the songs I use on my channel
@austincooper23806 ай бұрын
What kind of airbox do you got on your honda and the brand name where can i find a airbox like that
@casonray6 ай бұрын
Man I think they stopped making them. But if you get on the “Honda 300 club” on Facebook then you can ask in there. I have one that was Khaos and one that was rekluse. But I don’t think he is making them anymore. There might be a new guy now tho.