Is this any good? I have the 12v version. It's ok for small stuff. Bought it to vacuum my car when I had an apartment
@Tech-3D12 сағат бұрын
Suction power is good it just clogs up the cyclone dust collector quickly. But its cleaning is fast.
@LZLizard642 күн бұрын
Anyone could help me with an issue I caused with the silver collet piece, I over tighted the locking nut and cant get the silver peice to loosen with the locking nut
@LZLizard642 күн бұрын
Bud at the shop helped me, suppose to yank out the silver piece and reinsert it, with the locking nut off
@user-hr2pg5rt3s7 күн бұрын
👍
@plamenmoshev259716 күн бұрын
Hello, can you make this adapter for me for a fee. Thanks.
@Tech-3D16 күн бұрын
Yes, no problem, the price is 19,80 EUR + shipping costs. Or you can buy a 3D model and make it yourself. The link is in the description below the video.
@plamenmoshev259715 күн бұрын
@@Tech-3D Yes , super .I,m ready to buy this adapter
@Tech-3D15 күн бұрын
What country do you want to send it to?
@plamenmoshev259715 күн бұрын
Bulgaria
@Tech-3D15 күн бұрын
The postage to Bulgaria with tracking number is 10,70 EUR.
@usmanghani586616 күн бұрын
Hikoki 14tds convert to soft start plz upload the video
@itxofficial828119 күн бұрын
Perfect, I was wondering how the inlays in the L-Boxx looked like, compared to the ones from the standard 12V-35. This really helped, thanks!
@LordAnubis090921 күн бұрын
love this split type of battery adapter. much better for printing.
@Tech-3D21 күн бұрын
That was my idea in designing it. Thank you
@LordAnubis090921 күн бұрын
@@Tech-3D usualy i print them in vertical all in on. But this gives more options
@neludiaz50823 күн бұрын
Because of your stupid music I can't hear if this vacuum is self cleaning filter.
@Tech-3D2 сағат бұрын
It should be read and not listened to. It's in the name of the product.
@Narendratravels24 күн бұрын
Thank u so much for help.. I did it myself and it worked.. Kindly post more such vid of repair. So v can get help.. My compressor problems every month for different different parts
@hadzicana125 күн бұрын
ne vidim kakva korist od ovog ?
@Tech-3D25 күн бұрын
It doesn't matter at all. Don't make anything of it.
@NicolasGueguen-ij7tz26 күн бұрын
Good morning, your video is great, thank you for sharing with us. I want to do like you. what Makita rail reference do you have? I would like to order one, but I'm afraid of making a mistake thanks in advance
@Tech-3D26 күн бұрын
Thank you. Makita guide rail is only one type. It comes in different lengths, so you just choose the length you need. The rails can also be connected with an adapter. You do not have to order the wrong one therefore.
@weldingfabrication315727 күн бұрын
Where do i find that attachment you have on the bottom of the slim battery?
real question, why bother with all this instead of just finding anything metal to connect and short out the leads manually, like a screwdriver or piece of wire?
@Tech-3D28 күн бұрын
Have you tried shaking something metallic off a capacitor charged to 400 V? It doesn't do the PCB or the capacitor any good.
@johnjingleheimersmith925928 күн бұрын
@@Tech-3D what does that mean "shaking something metallic off"? And what exactly does it do?
@lllCANDYMAANlll29 күн бұрын
What is the green component? I thought it should be a resistor, this looks like a capacitor? Would this work on all capacitors? I want to make one. 👍
@Tech-3D29 күн бұрын
Resistor. This is described more fully in the comments.
@ThePSMA29 күн бұрын
Nice elucidating video, happy to know this router will fit my Makita trail guide adapter and fence. Great!
@sifissamos8459Ай бұрын
I wonder if it’s powerful enough to be useful with carbide burrs, for drilling cylinder locks..
@Tech-3DАй бұрын
There is a carbonless motor, and it is true that there is not as much of a drop in speed as with an ordinary cordless sander under load when sanding. This is also due to the electronic control that tries to keep the speed constant. However, I can't judge whether it would be powerful enough for this purpose.
@sifissamos8459Ай бұрын
Thanks for the answer.. would u say it has same “power” as the GRO 10.8 V-Li? Cause if jts similar then it will be fine i guess..
@ramihaj8628Ай бұрын
What is the horsepower of this model?
@Tech-3DАй бұрын
As stated in the title: 2000W
@ramihaj8628Ай бұрын
@@Tech-3D I mean horse
@ramihaj8628Ай бұрын
Can we install cmt blades? The inner diameter of the tree is 25.4 On the Dewalt DWE7492 table saw??
@fernandocastillo-ke9qvАй бұрын
Hola qué tal cómo te resultó esa fresadora Yo estoy en la duda si compraron hoy me gustaría saber tu opinión fresadora marca Bosch qué tal es en comparación por ejemplo la Stanley por eso estoy con la duda si comprar la stalin o la Bosch
@Tech-3DАй бұрын
No tengo experiencia con Stanley. Bosch es Bosch.
@mikevermeyАй бұрын
I bought this Bosch hoover 3.5 years ago and the power is simply gone. I've used it occasionally, not as a professional, used always these crazy expensive original Bosch hoover bags, air-cleaned it always at the end of the day and was always stored inside. The filter got always replaced on time, in other words; I treated this machine as a queen. And now, only after these few years it's barely working anymore. Bosch Blue became, as with many A-brands once, now a poor product in a luxury jacket. Consider something else for your money would be my advice., almost €600 for a hoover with such a short lifespan is simply not acceptable.
@xxnickthegreekxxАй бұрын
As the base doesn’t allow bevelled cuts Is there different bases that can be used?
@Tech-3DАй бұрын
No. This model is not just about the base. There are adjustable guides for the saw blade in the base. It is specifically designed for precise 90 degree cuts.
@michalpetro8977Ай бұрын
Zdravim, viete povedat ako dlho vydrzi na takej 2/3 ah baterii pracovat? Vdaka
@Tech-3DАй бұрын
Dobrý deň, neviem. Ešte som s ňou nikdy nerobil toľko, aby som jednu batériu vybil. Určite ale záleží na použití. Aký brúsny kotúč, aký prítlak atď...
@dsi7782Ай бұрын
Hello and thank you for your video but do you have a schematic for this table saw ? I have a same table saw but I m afraid to do a mistake. Thank. 👍
@Tech-3DАй бұрын
I got rid of this saw, so I can't help with the wiring anymore.
@milcer40Ай бұрын
Hello, I would like some information about the connection, I have the h5 version, which is slightly different in terms of connection. I connected it to the engine input but it only works at 5000 rpm. Even if I turned on 5000 and then switched to 3200 the engine stopped. I want to ask if the soft start only works for you at higher speeds or if I connected it incorrectly. well thank you
@Tech-3DАй бұрын
I got rid of this saw, so I can't help with the wiring anymore. The softstart module only works with a direct winding on the motor, meaning it only goes to max speed on the Parkside saw. The Parkside saw doesn't have two windings on the motor, and the speed control is only handled by overdriving the module, which reduces the voltage on the motor. This is the worst way to reduce the speed. Therefore, the motor will start poorly or not at all.
@alekseymkoАй бұрын
Bosch was with big battery and Parkside used the small 2Ah one! Not a fair comparison!
@craftsmanchen7663Ай бұрын
Do you have any comments after using it? Thanks.
@Tech-3DАй бұрын
It's really cool. It's not a cheap piece of tool but the ergonomics of the controls, the infinite speed control and the operability of use is amazing.
@craftsmanchen7663Ай бұрын
@@Tech-3D Thanks!
@simesimicevic8713Ай бұрын
are 3ah batterys enough?
@Tech-3DАй бұрын
Yes, it's cool, it has a little lower RPM and shorter cutting time but otherwise it cuts the same.
@mahmoodmirza3301Ай бұрын
Excellent piece of work! Thank you!
@MEGAPEKLOАй бұрын
Hľadám niečo takéto ale s reguláciou otáčok.
@s70cas7ic0Ай бұрын
Hey could you sell me a set of washers? Pretty please?🙏🏻
@Tech-3DАй бұрын
Just the shipping abroad will cost as much as saw blade reduction rings at your local dealer.
@slavadanko2484Ай бұрын
Fake! Parkside was on second speed and Bosch on first! And 35 Nm the Parkside drill does only with 4Ah battery.
@alekseymkoАй бұрын
Parkside was on 1st speed too
@mxdadNZАй бұрын
Great review thanks for taking the time, whats the chances of the STL for the wall bracket?
@Tech-3DАй бұрын
Thank you. The bracket is an older project and the info is in the description below the video: kzfaq.info/get/bejne/aZaKgJaYydKvkWg.html
@user-ut4ze3pm1fАй бұрын
Pro version of Dremel Versa?)
@Tech-3DАй бұрын
No
@newtlabАй бұрын
Ne treba zatvarati otvor za promenu diska ,bar ne y potpunosti..... zato što se guši usisivač
@newtlabАй бұрын
Ja sam frezom skinuo 0,5mm sa tog zuba na šini i odlično leži kao i makita
@unogazzy84Ай бұрын
Is it possible that this 2:27 will fit the bosch pmf 220 ce machine?
@Tech-3DАй бұрын
I have no information on this
@Animeclash4812 ай бұрын
Nice
@Tech-3D2 ай бұрын
Thank you :-)
@rastorenip79052 ай бұрын
Ake krimpovacie klieste si pouzil ?
@Tech-3D2 ай бұрын
HHYJ-50
@rastorenip79052 ай бұрын
@@Tech-3D dik. Tie som v ponuke uz nenasiel, mozu byt tieto HX-50B ?
@twelthstring2 ай бұрын
Why is the bottom made of plastic?
@Tech-3D2 ай бұрын
Make it transparent.
@twelthstring2 ай бұрын
@@Tech-3DSince the hole in the bottom plate is transparent too, I don't need that. To vulnerable and scratched in no time I guess.
@igneeleblack24852 ай бұрын
you are amazing thanks you for the video ☺️
@tomharries8472 ай бұрын
Wifey just asked if was watching porn coz of the music, I said yeah. Tool Porn.
@alexdragomirescu50842 ай бұрын
Hi, do you have a part number for the roloc holder?
@Tech-3D2 ай бұрын
Hi, I don't.
@user-nx3zk5qi8t2 ай бұрын
I wish this was available in the states!
@Tech-3D2 ай бұрын
Even in Europe it is not easy to buy it. Not every dealer has it. Mostly the models without digital depth gauge are more available.
@garryparkes91212 ай бұрын
I have the GSR12-300HX and have my eye on a GSB12V-35. I bought the 300HX for size and weight and it has worked out very well.
@AndrewHeathcoteak2 ай бұрын
hi would this mitre gauge fit on the Evolution Rage 5s
@Tech-3D2 ай бұрын
I can't answer that, I don't have that saw and I don't even have this Vevor ruler anymore. It's not a good product at all. I use a Hongdui. kzfaq.info/get/bejne/hpOUYKiQlrDenX0.html kzfaq.info/get/bejne/eciBmspls83XiX0.html
@Holyshit00162 ай бұрын
Nice
@sudhirpatamajhi.kuivideo3 ай бұрын
Sir I am interested sir contact me
@demontagemontage3 ай бұрын
اشكرك What is the value of the resistance you used?
@Tech-3D3 ай бұрын
I already answered this in the comments below the video.
@demontagemontage3 ай бұрын
@@Tech-3D SORRY BUT I CAN'T FIND IT? THANKS ADVANCED🙂
@user-rg7wc7qf9y3 ай бұрын
This showed me nothing about if this product is worth buying or not.
@Tech-3D3 ай бұрын
But then that is correct. I'm not doing a buying consultant, I'm just showing what the product looks like up close.
@user-rg7wc7qf9y3 ай бұрын
This showed me nothing about if this product is worth buying or not.
@Tech-3D3 ай бұрын
But then that is correct. I'm not doing a buying consultant, I'm just showing what the product looks like up close.
@Rhutt258Ай бұрын
@@Tech-3D But makes short work of rough dirt, where exactly? Disappointing video in all aspects. People are looking for reviews on performance.. What does it matter what it looks like?
@user-rg7wc7qf9y3 ай бұрын
This showed me nothing about if this product is worth buying or not.
@Tech-3D3 ай бұрын
But then that is correct. I'm not doing a buying consultant, I'm just showing what the product looks like up close.