jovanmichaels

Пікірлер

@jeffallen3382 19 сағат бұрын

Be careful when you start it to keep an eye on the fluid level. I don't like using anything less than a quart of fluid in a dry converter.

@JovanMichaels 19 сағат бұрын

yes I will make sure to keep a eye on the fluid. Thank you

@apollopetdoors5463 23 сағат бұрын

I always enjoy your videos and they motivate me! Nice work dude!

@JovanMichaels 19 сағат бұрын

man I appreciate that. You guys commenting on the videos keeps me motivated 🤘🏼

@GannonKupkoSr 23 сағат бұрын

You just gave me an idea for all my scrap 2x4 pieces... not joking either. You are so me from 30 years ago, no help, figuring it out on your own. We didn't have KZfaq then, but still much respect to you. TC's feel like safecracking sometimes. R33, L78, R55 I am following this since I may be looking to swap out my 3550 on my '88 GT with a 408W. Wife cant push the clutch in 😆😆. Looking here for ideas. Keep up the great work!!

@JovanMichaels 19 сағат бұрын

yeah man the wheel cribs are nice. love to hear it. appreciate you checking out the videos man🤘🏼

@kylerussell270 Күн бұрын

Where have you been? Glad to see a video up

@JovanMichaels 19 сағат бұрын

man I’ve dropped a few videos. KZfaq just doesn’t notify you guys. Go to my channel and click (videos) they will be in order. 🤘🏼

@vrm86gt Күн бұрын

is your driveshaft going to be correct length?

@JovanMichaels 19 сағат бұрын

nope, need a custom driveshaft

@robertfisk8344 Күн бұрын

Have you tried flipping the crossmember the other way upside it looks like it would be close such a shame to have to buy a new cross member such a nice piece you have best of luck love the build

@JovanMichaels 19 сағат бұрын

yeah this crossmember won’t work. Already got another on the way. Should get us dialed in🤘🏼

@FreestateFabrication Күн бұрын

Man.... I feel like it's lame as hell to go autobut recently I have been fighting it lol I'm tkx now and it's got some tire on it but I street drive it and it's absolutely frustrating knowing how much faster it would be auto 😂 I'm fighting it but I may not be far behind you on that swap. Out of curiosity, why the 400 vs a C4? I haven't really looked into it but if I went auto I was planning C4 w a brake.

@JovanMichaels 19 сағат бұрын

yeahhh lol fast is fun. I don’t want to leave anything on the table 🫡

@mylanmiller9656 2 күн бұрын

TYhere is a better way than that You can buy a Cutter that goes through the Valve guide It is a lot more precise.

@mylanmiller9656 2 күн бұрын

you know you can warp a aluminum head by Bolting one end down and not the other, Your taking a chance.

@fernandobadillo726 2 күн бұрын

What internal did you used sorry i know is 4 yr ago but i just seen this video

@JovanMichaels Күн бұрын

stock internals. It’s just a 306.

@toddjohnson7787 2 күн бұрын

Did you use teflon thread tape to get that seal you need when you screwed in your catch can fittings at the 12:40 mark?

@JovanMichaels Күн бұрын

catch can fittings are AN and self seal.

@trevorn7856 5 күн бұрын

amazing ive always wanted do this same thing . wow

@Bowman210 5 күн бұрын

If you went with 16 rockers instead of 172 you wouldn’t have not have needed to do that. Smaller lift less likely to touch. What are your cam specs?

@bluesky-ud9wg 7 күн бұрын

Everyone knows you can't run a 2.02 valve, lol

@sakuraturbo3364 9 күн бұрын

What a waste of my data 😂

@sakuraturbo3364 9 күн бұрын

All that talk and never start that piece S*****

@coreycheek8286 12 күн бұрын

Nice , bruh.... Change the hood exhaust.

@JovanMichaels 9 күн бұрын

thanks buddy

@ChillFactorProducts007 14 күн бұрын

Very Nice Check out our cool wrap for the Charge pipe and intake upper cool wrap

@JovanMichaels 9 күн бұрын

I will check it out

@user-gf1rm6dt9n 14 күн бұрын

That’s clean like the set up. Nice choice

@JovanMichaels 9 күн бұрын

thanks bud. Appreciate that.

@TheModAddict 14 күн бұрын

I was going to see if you dont add a glass piece to showcase that intake its a missed opportunity..but if you gotta cut, a hole is gonna be just as killer imo.

@JovanMichaels 9 күн бұрын

yeah I’m not mad at it.. it will look wicked

@rmdavenport50 14 күн бұрын

You can buy or make some K-member spacers to shift everything down to clear. I’m fitting a Trickflow Box intake which is just as tell on a 351w block with your same hood in my car. I used a 3/4 spacer place I made but a lot of people sell them because with long travel no prep struts nearly everyone uses them.

@JovanMichaels 9 күн бұрын

yeah I might have to look into that.

@GAGEDADY 15 күн бұрын

Get k member to body spacers I seen some no prep foxes running over 2 inch spacers to allow more front end lift. You also can try low profile motor mounts. I have a 351 turbo in my fox with the same holly you had before.

@JovanMichaels 9 күн бұрын

that is a option. We’ll see where it goes🤘🏼

@RJ-zf7fw 15 күн бұрын

Time to build an aftermarket 363 shortblock

@JovanMichaels 9 күн бұрын

A stronger short block is in the future for sure.

@foxaholic4228 15 күн бұрын

Looking good my Dude, now all you need is A 363 SB, Because I don't think your Production Block is going to stay in 1 piece for long.

@JovanMichaels 9 күн бұрын

I know I know. A dart block is much needed. But we’re going to give this little production block everything we got.

@nunya2814 15 күн бұрын

Like the direction you're goin buddy, I see a dart block in your future.

@JovanMichaels 9 күн бұрын

man. I really do need a dart block and a rear end . At that point ms parker would be a weapon 🤘🏼

@nunya2814 9 күн бұрын

@@JovanMichaels I'll keep an ear open for a block for ya, if you build that 8.8 right it'll handle plenty of power, if your goin anything over a 1k hp then you can start looking for different rear ends, but those Ford 8.8s are strong units weakest part of them honestly is the where the axle tubes meet the housing. Check out neo mustangs, he's got a fox turbo 363 stick car running high 8s low 9s with a built 8.8, torque box reinforcement all that good stuff.

@FoxbodyJon 15 күн бұрын

You can always drive to Immokalee 1/8 miles track it’s like 1:30 hours away

@JovanMichaels 9 күн бұрын

yeah that would be cool. But I’m really after a 1/4 mile time.. we’ll see. Got a ways to go before the cars up and running.

@momentummotorsports6137 15 күн бұрын

Thats what im talking about my guy looks amazing, the hood will look good with the intake showing

@JovanMichaels 9 күн бұрын

yeah man I’m stoked. Definitely leveling up 🤘🏼

@theANGRIERone 15 күн бұрын

That's tight, brother. Can't wait to see it finished 🤘

@JovanMichaels 9 күн бұрын

a lot of work ahead of us. but we will get there man. 🤘🏼

@DreamStateLiving 15 күн бұрын

🔥🔥

@JovanMichaels 9 күн бұрын

🫡🙌🏼

@ChuckG603 15 күн бұрын

Love the setup. I never realized how lucky I am to have a ¼ mile track 30 mins from home. Love the build can’t wait for more

@JovanMichaels 9 күн бұрын

yeah I wish man. It would be so much easier to get her to the track where she belongs

@ChuckG603 9 күн бұрын

@@JovanMichaels it’s all a process brotha ms Parker will get there and we will be along for the ride

@apollopetdoors5463 15 күн бұрын

Awesome! How many #s of boosters are you running?

@JovanMichaels 9 күн бұрын

11-12psi… for now

@davidshipley2611 15 күн бұрын

Hell yeah bro glad to see the new video drop

@JovanMichaels 9 күн бұрын

yessir. trying to keep the content coming. the build never stops

@thomassanders6679 16 күн бұрын

👍

@thomassanders6679 16 күн бұрын

Good day

@JovanMichaels 15 күн бұрын

🤘🏼

@thomassanders6679 16 күн бұрын

👍

@thomassanders6679 16 күн бұрын

👍

@thomassanders6679 16 күн бұрын

It's good to see a young man fight his fear of not knowing, I'm a nobody but I'm proud of you keep up the good work. Just found your videos and really enjoy them

@JovanMichaels 16 күн бұрын

hey bud. Welcome to the channel.. car has came a long way since this video. check out some of the more recent videos. lots more to come 🤘🏼

@jeeplifted1 16 күн бұрын

Let’s go. I love this car.

@JovanMichaels 16 күн бұрын

just wait till you see what’s next 😈

@turboman351w3 17 күн бұрын

iam going to a sequential t56 magnum where you dont have to lift to change gears click click gone baby

@JovanMichaels 17 күн бұрын

sounds like a solid choice 🤘🏼

@apollopetdoors5463 18 күн бұрын

Dude by the way what rear end gears were you running with the manual?

@JovanMichaels 17 күн бұрын

3.55

@hoier01 19 күн бұрын

So on that transbrake you can wire to just the switch in that shifter. It’ll engage the transbrake when you put it in reverse. I have the same shifter.

@JovanMichaels 19 күн бұрын

hell yeah solid information. That makes my life a lot easier 🤘🏼

@ryan90lx 19 күн бұрын

What made you go th400 vs the others that were recommended ?

@JovanMichaels 19 күн бұрын

from the research I’ve done, I’ve heard nothing but good things about the th400 when it comes to racing. many people who have gone that route say they love it. A lot of people with fast cars run th400’s 🤘🏼

@GannonKupkoSr 19 күн бұрын

At 4:57 is words to live by.... That bellhousing concerns me a bit though. I feel that the firewall at the top comes down at a steeper angle than that housing (don't hold me to that... it's been about 20 years since I took mine out). Are you OK just making room with a hammer if it's an issue?

@JovanMichaels 19 күн бұрын

We are going to get it in there by any means possible lol appreciate you checking out the video🤘🏼

@johnmilner6505 20 күн бұрын

Man.. should've went 6r80.. I've had a th400..c4.. T5..tko600.. it's far superior to all of em..

@JovanMichaels 20 күн бұрын

I have heard nothing but good things about th400s from people who are actually fast. I’m sure it could be done with many different combos, this is just the route I decided to take🤘🏼

@apollopetdoors5463 20 күн бұрын

Dude I’m always happy to see your videos. I love the energy. Now it would be so awesome to see that run with that same GT500 after this mod. Take care!

@JovanMichaels 20 күн бұрын

that means a lot buddy. I appreciate your support. we’ll definitely have to make that happen 🤘🏼

@momentummotorsports6137 20 күн бұрын

Thats awesome buddy i do the same thing save up and buy better quality parts to allow me to grow into them , the car is going to be very consistent and stay up in the rpms and boost

@JovanMichaels 20 күн бұрын

hell yeah man. Live and learn. Thats what we’re hoping for man. time will tell 🤘🏼

@six50motors 20 күн бұрын

Nice she gonna fly

@JovanMichaels 20 күн бұрын

that’s the goal man. 🚀

@nickolasgood6926 20 күн бұрын

What foam are you using

@84foureyedfoxbody87 20 күн бұрын

Make sure to check your converter spacing , don’t want to trash your thrust bearings in motor . TH400 hold a lot power and can be beef up even more if needed . I’m going to try a glide at first

@JovanMichaels 20 күн бұрын

yes. I will be sure to check and double check converter spacing once we get her in there. This transition is going to be a process but the car is going to be rowdy when it’s all put back together. 🤘🏼

@joshmiller8663 20 күн бұрын

Solid piece bud.

@JovanMichaels 20 күн бұрын

yeah man. I’m excited, more to come. got some other things in the works as well🤘🏼

Ең жақсы KZfaq

Пікірлер