Oh, this is awesome! I rarely have patience to go through a full length vid but this one is top! Thank you!
@badseedfx18 күн бұрын
I'm self taught with years of practical experience, and I've decided recently to pursue it on a stronger level, and in all the videos I've seen since I've started this, this one is probably the absolute best one. Also that cinematography was excellent so it was easy on the eyes. Thank you so much.
@Schlaumal18 күн бұрын
Hey Stuart, thank you for your amazing video! Is the burlap very important for the stability of the plaster?
@stuartbray18 күн бұрын
Yes, as plaster is brittle and may crack when under stress such as when being levered open or bolted/clamped closed.
@Schlaumal18 күн бұрын
@@stuartbray Okay thank you for answering my question!!! So I will buy burlap :)
@anne-majtangermann1895Ай бұрын
That was amazing. Thank you
@stuartbrayАй бұрын
You are so welcome!
@nigeldonaldson1647Ай бұрын
That is a LOT of layering procedure, surely it could have been done more simplistically
@stuartbrayАй бұрын
Certainly it could
@narinderjs240Ай бұрын
Amazing
@Rob-fn1kpАй бұрын
Hi Stuart.... regarding this half of the face- why didn't you just do a "simple" brush on silicone mould and then fibreglass over it? (just curious- I'm not being a belter)
@stuartbrayАй бұрын
It's a good question. You'll get a better result, with neater keys and consistent controlled thickness of silicone because all that is established with clay. I really like a continuous key around the edge, and it's easier to do this in clay. Brush on moulds work well for the sort term but I like to use a pure silicone without adding thickeners or accelerators etc. if possible which can reduce library life. I have also a done brush on mould video.
@Rob-fn1kpАй бұрын
@@stuartbray got ya! Thanks for replying! I’ve been studying these videos recently. I’m about to have a go at a pretty ambitious project… trial and error is my main thing… which I’m happy with (time and money currently allows)- given myself a 40% success rate on this one 😅. I can ping across what I’m working on if you’re interested (Paramedic… making a training aid)
@user-dm9ch2ix2sАй бұрын
ありがとうございます。皮膚の表現方法が分からず、途方に暮れていなんです。本当にありがとう。 Thank you. I don't know how to express my skin, and I'm at a loss. Thank you so much.
@quikcosplay7715Ай бұрын
Oh my goodness! This is awesome!!! I’m actually making a severed finger necklace 😅 would you be able to cast anything and make a wearing mask if that makes sense? Or would I need to stick to silicone/latex? Thanks!
@stuartbrayАй бұрын
If you are using a mould then you'll need a material which starts out as a liquid and then dries or cures to a flexible solid. There are a number of materials that have this property but latex and silicone are the most reliable and easily acquired. There are also flexible urethanes but these are smelly and unpleasant to use for masks. There are liquid neoprenes too but these are not easily found in the UK so I haven't used them
@imaginationworkshopstudioАй бұрын
Hey guys! 👋
@cianmoriarty7345Ай бұрын
"unfortunately it's called a flange" 😦 You crack me up 🤣
@ahmedsubhan66302 ай бұрын
Best tutorial video
@garypruett2692 ай бұрын
The clay looks so soft. I cant find any like that 😪
@stuartbray2 ай бұрын
J. HERBIN grade 50. They make about 5 softnesses
@KurtisJoseph2 ай бұрын
How many layers of fiberglass creates a shell mold that is practical to use? I am making one now using Bondo and fiberglass cloth. I do not need to capture detail. Iot is for a silicone mold. Fiberglass fabric seems rather sturdy.
@stuartbray2 ай бұрын
It's available in different thickness, or weights. Usually the one I use is 600g which is the weight of a square Metre. That I use two layers with a third on any flange or edges which need drilling/bolting/clamping or levering against.
@miltonwelch41772 ай бұрын
Thank you for the video with great camera work.
@jeancarlossantosencarnacio53092 ай бұрын
Awesome
@jedstuart59502 ай бұрын
Just found this, really cool! I'm looking more about it in 3D, but this, this is better than any ZBrush tutorial!
@andrewt44562 ай бұрын
regarding your air bubbles issue - it may be due to varying temperatures. One often gets this when varnishing classic yachts' teak, if one starts too early in the morning: you need to wait until it has warmed up and stabilised temperature-wise, with the aim for it to be if anything COOLING after the varnish is applied. This stops the substrate from gassing, as the cooling draws anything into the substrate, rather than pushing it out. So if possible I would try to warm the object up slightly, let it stabalise a bit above the ambient/room temperature, and then the gassing/bubbling will (hopefully) be minimised as the coating sets.
@ginabean21403 ай бұрын
This is beautiful to watch. 🙂
@stuartbray3 ай бұрын
Thanks, Gina. I really enjoyed making this video too.
@441rider3 ай бұрын
I have used part all wax before molding plaster and stone. Have you tried airbrush seal with clear coat?
@mahmoudzaefi29583 ай бұрын
hi. thanks alot. excuse me, how much silicone do you used for this mold? thanks.
@stuartbray3 ай бұрын
About 2kg
@user-rl5fh6wl5c4 ай бұрын
Hello from John rich, Lawanda Nelson rich, and Virginia Nelson Moore all from Atoka, raised in the Methodist church
@michaelpearson12724 ай бұрын
And if you want to use a human to make a silicone mould mould make sure you use skin safe. Also make sure you stuff straws up his nostrils and one in the humans mouth as you want your human to still be breathing after an hour or two.
@BattlesWithBitsofRubber4 ай бұрын
I would never advise straws in the nose, as knocking that and carving a groove into the nasal cavity isn't great. It also distorts the nose and lays flat over the lips and gets in the way of business. I 3D scan nowadays instead life cast in the main. So much more accurate and comfortable.
@michaelpearson12724 ай бұрын
@@BattlesWithBitsofRubber no computer in my day. No videos in my day. And no books just pamphlets with silly drawings on them so I learned the hard way with all the other oldys but knowledge was handed down and nice to see we where able to hand it over to the more advanced technology of today. But I see your point with the nostrils but still think it's a great idea to use skin safe on the human skin and pop a straw in the mouth if you choose the old fashioned way of the old school mould maker.
@BattlesWithBitsofRubber4 ай бұрын
Naturally you'd use a skin safe silicone for life casting. This video is about making a master mould from a plaster, so this video isn't about skin safe materials. I have done life casting videos where this is the subject. I too grew up learning from old school techniques and masters. It amazing actually how much you appreciate the new tech having spent 30 years never having it. I worry that mould makers who only use digital won't have the hands one experience to appreciate the benefits of being able to print up moulds and mould jackets. There's nothing like hands on experience.
@michaelpearson12724 ай бұрын
@@BattlesWithBitsofRubber I'm sorry if I come across telling you how to make a mould that's not my intention im saying this for new mould makers watching your video. I seen some on on you tube make a two part plaster mould of some ones hand then try to open it with a Stanley knife on the person's hand. I also seen a guy taking a fibreglass mould half from another man's torso and struggling for a while you heard him taring it of. I could not believe it. So it's just in case some one gets ideas from your video. It's obvious to you and me but not to others
@BattlesWithBitsofRubber4 ай бұрын
@@michaelpearson1272 yow! That madness. You seen the lifecast video of a woman who has her head thru a hole in the table and a box built around it? They filled the box with alginate and it pushed away the straw up her nose and basically she started to panic and nearly drowned. Gave me the heebee jeebees.
@ishitagupta21384 ай бұрын
tx lol
@wilkas4 ай бұрын
Can you replace gelatin with food grade agar? If yes, would agar be as strong as 300 bloom gelatin?
@stuartbray4 ай бұрын
You can try. I haven't used gelatine for years now but only way to be sure is make a small batch to test and see if it will do what you need.
@prawnstar92135 ай бұрын
Cap plastic looks like plumber tape
@prawnstar92135 ай бұрын
My inner pervert keeps laughing
@Sleezeetwo5 ай бұрын
Thank you for continuing to do the podcast, i am just finding out about it and have loved catching up on all of the episodes. I am really enlightened to get such great advice from people inside the industry! Much love from Minnesota.
@monicalee20116 ай бұрын
hi Stuart, love your work. got the DVD from Mould Life. May I ask if I'm sculpting many veins that are close to each other, it means have to do the cutting edges for Flat mould?
@stuartbray6 ай бұрын
Hey! Thanks for the support. If you want silicone pieces with cap plastic encapsulant, then I would indeed do that. Personally though, I woukd make them in a flat mould but use a Prosaide Based paste such Bondo, Prosthetics Transfer Material (PTM by Tinsley is fantastic) or similar. That doesn't need a cutting edge doing as there is no cap plastic involved.
@monicalee20115 ай бұрын
Thank you for responding so quickly. Appreciate :) @@stuartbray
@monicalee20115 ай бұрын
yes, I'm using silicon pieces cap plastic encapsulant. regret doing so many veins in one small area :( taking longer than I thought to do cutting edges :(
@monicalee20115 ай бұрын
yes, I'm using silicon pieces cap plastic encapsulant. regret doing so many veins in one small area :( taking longer than I thought to do cutting edges :(
@sadieross-johnson28006 ай бұрын
After your talk at the Prosthetics Event, I’ve gone from tinkering with digital to diving right in there, and I love it! Thank you both
@agusromero91486 ай бұрын
Imágenes del proceso gracias amigo stuart
@arabellamayer91956 ай бұрын
Hi Stuart. I made some silicone prosthetic appliances with plat gel 0 and Super Balidez cap plastic but forgot to put deadener in. I tried to apply one of them, stuck it on with pros-aide but couldn't remove the edges with IPA using cotton buds. I even tried to use acetone but didn't work either. Can it be because I forgot to put deadener in? Or what can be the problem?
@stuartbray6 ай бұрын
All cap plastics should dissolve with acetone, even the alcohol based stuff. Sounds like the edges are not pure cap plastic, there is some silicone in between the two layers. This means the thick edge you are trying to dissolve is not cap at all, but the silicone between the layers. Nothing dissolves silicone, and a thick edge like that means something went awry in the casting stage.
@arabellamayer91956 ай бұрын
@@stuartbray thanks. I tried some other piece I made and they dissolved. I bumbed that particular one up 🤣🤣🤣
@yiyiyiyiyina6 ай бұрын
thank u thank u thank u ❤️
@ClementSunday-xg2ys6 ай бұрын
I need this silicone to use and make pop design mold, how can I get it ?
@stuartbray6 ай бұрын
From a special effects materials supplier. It all depends on your location as to which supplier is closest. Whereabouts in the world are you based?
@johnsavold6 ай бұрын
Excellent detailed tutorial. thanks.
@TheEdvinas6946 ай бұрын
how much would you recommend to dilute cap plastic with acetone I use kryolan glatzan L, and how many layers would you do with a brush ?
@stuartbray6 ай бұрын
I don't rate Glatzan as an encapsulant, but ifbyiuvare going to use it then thin it as much as needed tobget through your airbrush. Usually around 6 or 7 parts solvent to one part cap plastic.
@TheEdvinas6946 ай бұрын
@@stuartbray thanks for the answer I'm a beginner so I don't have airbrush yet trying to make it with a simple brush , also do you think glatzan is a bad choice to begin with for encapsulating pieces ? thanks again for your time
@stuartbray6 ай бұрын
@TheEdvinas694 yes. I don't think nit is very good as an encapsulant. I found it too stiff, so I'd recommend Baldies acetone based cap plastic. It can also be bought as a pure dry plastic bead, which makes it easier to ship around the world
@lunaRdeltaY6 ай бұрын
satisfying video to watch
@jeroenscholte89396 ай бұрын
Thank you for this video. Very usefull for me. I want to sculp a dragon so i'm very exited with your video's. Ther are clear and helpfull.
@HellsingLover506 ай бұрын
"Just put the blob in the right place" Words to live by
@kathleenmholland80557 ай бұрын
Marvelous! Thank you so much for helping me learn.
@user-vi9dg1th9m7 ай бұрын
I need a rubber mold for flower jar production
@stuartbray7 ай бұрын
Cool.
@gosolo10007 ай бұрын
Thank you so much
@kathleenmholland80557 ай бұрын
Superb instruction! Thank you!
@TheEdvinas6947 ай бұрын
hey I have a question, I'm a beginner at this I tried making a prosthetic with melting cap plastic edge but I couldn't melt it somehow I wonder was it too thick or maybe I didn't clean exes silicone properly and I was left with layer of silicone what could be the problem here ? also pros aid was not sticking well at all :D ....
@thedreadedmushroom30127 ай бұрын
These videos are great! Thanks so much. Super excited to start making some moulds and cast
@anuzmaharjan72367 ай бұрын
How to make a clay
@joepalmisano93727 ай бұрын
Simply Amazing 😊
@williamreese13868 ай бұрын
Very good video! Thanks!
@user-nw3vr7no8y8 ай бұрын
Correct volume...2low!!
@arabellamayer91958 ай бұрын
What's the best thing to use to stick gelatine with? I'm scared of heating it up to stick it to skin
@stuartbray8 ай бұрын
I prefer an adhesive such as Pros Aide or Beta Bond. It's also worth sealing the back of the appliance with a sealer such as Kryolan Fixer Spray or Matthew Mungle Sealer A. This will help prevent perspiration moisture from getting to the gelatine and melting it.
@arabellamayer91958 ай бұрын
@@stuartbray thanks. I started making some silicone ones today. Hope they turn out ok 😊