What material do you use to make your templates? A stiff fabric?
@alexandriapottery6 күн бұрын
Hi:) I order extra large craft foam on Amazon. Thanks for watching!
@donnajobe61117 күн бұрын
Just ordered mine!!
@alexandriapottery6 күн бұрын
Yay!!!! Can’t wait to see what you make!
@patriciasadlertrainor677116 күн бұрын
have you thought about adding a narrow coil around where the foot joins the bowl?
@alexandriapottery9 күн бұрын
Hi there...I've never added coils to my joins, so I likely will not do it for this project unless I have issues at the base. I use my needle tool to draw down clay from the other piece to smooth over the attachment (if that makes sense), so it's like a built-in coil. I will keep you updated after it's fired! Thanks for watching!
@donnajobe611120 күн бұрын
When will you have the planter jig for sale please
@alexandriapottery9 күн бұрын
The Jig is already up in our shop under "6.5C Tapered Jig." Here's the direct link: www.alexandriapotteryco.com/product-page/tapered-handbuilding-jig Thanks for watching!
@erikabearden60820 күн бұрын
You give such good ideas and very helpful tips, thanks
@alexandriapottery9 күн бұрын
I'm so happy you're here and learning with me!
@diannasmudshop861120 күн бұрын
It says I can find the full project on IG, I don’t usually go on IG, but I did go to find the project, did not find it. Only saw rolling double texture. I wish you had everything here on KZfaq. I can’t find anything on IG. Don’t like IG. 😞
@alexandriapottery9 күн бұрын
Sorry you had trouble on IG. The prep for the bowl is on our page @alexandriapotterytools with the on-screen title "Full Pedestal Bowl Assembly On KZfaq." It's the 4th reel in at the time of this comment. I can post that here too...but the format will be off because it was filmed for IG.
@diannasmudshop861122 күн бұрын
Love your stacking mugs. Do you have a video showing how you carve your bottoms?
@alexandriapottery9 күн бұрын
I will add a video for you! I use the same technique in this video: kzfaq.info/get/bejne/rsV4eMKl0cu7iZc.htmlsi=p6NClIAGby_TQ-yw It's under my Playlist: Pottery Carving
@patgalletti622122 күн бұрын
Where do we find the fluid amount these cups hold? I looked through your videos but could not find that information. Love these jigs!!
@alexandriapottery22 күн бұрын
You can find them under our FAQ section: www.alexandriapotteryco.com/faq
@Mariazinhasousa1123 күн бұрын
MARAVILHOSO!!!
@alexandriapottery22 күн бұрын
Thank you!
@LeeMCeramics26 күн бұрын
Wonder if that would work with a rolling pin if we don't have a slab roller...🤔
@alexandriapottery24 күн бұрын
Probably! Let me know if you give it a try!
@taniam652027 күн бұрын
Very helpful thank you 🙏🏽
@alexandriapottery27 күн бұрын
I’m so glad it’s helpful! Let me know if you have any other questions:)
@lindatortorice935627 күн бұрын
Thanks for the demo. I recently bought some of your shaped ribs and wasn’t sure of the process. Thanks again.
@alexandriapottery27 күн бұрын
Oh good, I'm glad this video help!
@MuslimChocolatier27 күн бұрын
Your technique is fascinating!
@alexandriapottery27 күн бұрын
Thank you! And thanks for watching!
@fionabryant231127 күн бұрын
Thank you for sharing your project on making mugs. Where do you purchase the moulds from? Much appreciated. From New Zealand.
@alexandriapottery27 күн бұрын
Hi there! Thanks for stopping by to say hello...you can find all of our tools on our website: www.alexandriapotteryco.com Happy Making!
@GabrielleLowe-d5u27 күн бұрын
Is this the large one?
@alexandriapottery27 күн бұрын
Thanks for tuning in! This is our Large Nesting Mug Jig...currently the biggest one we offer:) Spoiler...we are working on some Nesting Bowls!!
@boiledbread27 күн бұрын
🙌
@alexandriapottery27 күн бұрын
Thanks for watching!
@taniam652028 күн бұрын
Love this! ❤
@alexandriapottery27 күн бұрын
Texture is SO much fun! Thanks for watching and commenting!
@TobyMoser-e8w28 күн бұрын
I like your work
@alexandriapottery28 күн бұрын
Hey, thanks for the kind words ❤️
@Heartwing37Ай бұрын
Love this so much!!! ❤🙏🏼
@alexandriapotteryАй бұрын
Thank you!!
@NancyStrahinicАй бұрын
Do you have a link to the mold? Or manufacturer?
@alexandriapotteryАй бұрын
Hi, we make and sell the tools at www.alexandriapotteryco.com :) The silicone mold is from amazon. Thanks for stopping by!
@mugnificentpotteryАй бұрын
Alexandria, Thanks for sharing your lighthouse idea. Could you please direct me as to where I can access the printable downloads. TIA Nancy from Ontario
@alexandriapotteryАй бұрын
Hi Nancy! You’re so very welcome…I would love to see your finished lighthouse! Head over to www.alexandriapotteryco.com and under the Tools Tab you’ll see “Templates.” You’re looking for 3 of them: 6.5A, B & C. Hope that helps!
@Ka-BO0MАй бұрын
99% ??? your implying that 1% fails ?? can we see the fails
@alexandriapotteryАй бұрын
Haha, yes yes…the rumors are true…my pottery isn’t perfect 🙋🏻♀️ I’ll dig up a pic and post it to my IG Stories!
@alexandriapotteryАй бұрын
Posted on my IG @alexandriapotterytools full video is in feed 👍🏼
@kristytemple6863Ай бұрын
What did you use for that beautiful texture?? Just got my jigs, so excited to try!
@alexandriapotteryАй бұрын
Yay! Did you try them yet?? I used a fondant mat from Amazon:)
@mindygeist7157Ай бұрын
Thanks so much!
@alexandriapotteryАй бұрын
You're welcome! Have you tried the project yet?
@mindygeist7157Ай бұрын
@@alexandriapottery I have freehanded but not with a stencil yet. It is on the to do list 😊
@kathyslonka80752 ай бұрын
From Kathy slonka Could I have the tall molds for the iced drinks and the one for travel mug . Thank you.
@alexandriapotteryАй бұрын
Hi Kathy, you can find all of our Jigs on www.alexandriapotteryco.com! If you email me at [email protected] I can send you direct links. Thanks!
@jadesines53432 ай бұрын
Is it this one that looking for to know how to shape the foot? It says This video is a month old...? I thought you were posting a new one? In any case, I think I get it, I'll have to see if I have a tool like that ❤ thanks!
@alexandriapottery2 ай бұрын
Hi, this is an older video, but I do all of my footwork the same as this:) Hope that helps!
@kathleenfreeman16962 ай бұрын
🥺 I just had hand surgery this past Monday and can’t make anything for awhile. I sooo want this jig, but it will have to wait……sadness. However, when I am able to make pottery again, will it be possible to add an extender (I already have one) to make it about an inch taller? Thanks
@alexandriapottery2 ай бұрын
Hi Kathleen:) I hope you have a quick recovery! We have 3 new sizes coming out for the Nesting Mug Jigs...so you'll be in luck! Keep an eye out for the additional sizes.
@mandyowen48922 ай бұрын
Where are the jigs from please.
@alexandriapottery2 ай бұрын
Hi there! You can find all the tools I use on our website: www.alexandriapotteryco.com
@leannad38982 ай бұрын
Really love this. How many ounces would you say the finished mug holds? I couldn't find it on your site. Thanks!
@ellemenohplants26442 ай бұрын
Please stop with these awesome jigs! I’m going to go broke! Just used some of your jigs and tools for the first time last week (tumblers). I was planning to order a smaller tumbler size, and now this video just popped up. I want this mug jig as well. Thanks for making free classes and quality products ❤.
@alexandriapottery2 ай бұрын
Ahh! Lol! We have so many ideas and they are coming out left and right! We are thrilled to hear that you love the tools and tutorials...we are happy to serve you all well!
@panibear2 ай бұрын
What jig are you using in this video?
@alexandriapottery2 ай бұрын
Hi there! I'm using our 5.125 Jig with the extenders. They come in 3 sizes depending on cup holder sizes. Let me know via email if I can help with anything else! [email protected]
@panibear2 ай бұрын
@@alexandriapotteryok. I just want to say I got t jig and omg! I tried to make one but it didn’t go well (I’ve only been doing this for about a year) but I rewatched your tutorial on your site and it was totally my error. The jig is perfect and I can’t wait t try again!
@denisenoble40103 ай бұрын
I'm planning to do some carving, just as your showing, on a large pot, I've joined 3 cylinders together, so i have a lot of surface area to cover, thanks for sharing. Great video😊
@alexandriapottery2 ай бұрын
Awesome! I'd love to see what you make! You can tag us @alexandriapotterytools
@raysville72563 ай бұрын
How about a link to this invention.
@alexandriapottery2 ай бұрын
Thanks for tuning in...all of our links are in the Description Box:)
@sharonpieri18963 ай бұрын
You mentioned silicon for outside. Where do you get those?
@sharonpieri18963 ай бұрын
My tapered jig is on its way...yeah
@alexandriapottery2 ай бұрын
Hi Sharon...thanks for tuning in! I get my silicone sleeves on Amazon and Etsy.
@alexandriapottery2 ай бұрын
Yay!!! It's such a unique project...have fun!
@raeavery21613 ай бұрын
Can you give me prices on your jigs please?
@alexandriapottery3 ай бұрын
Hi! Thanks for stopping by...our jigs range in price. All prices are listed on our website www.alexandriapotteryco.com
@carolmayer81383 ай бұрын
This is a great project! Thank you for sharing!
@alexandriapottery3 ай бұрын
So happy you liked it! It was a ton of fun to make!
@stacywilson40663 ай бұрын
I love this idea! Thank you for sharing. This was a great use of your forms. I have several of your forms and have actually used one of the forms for something other than what it was originally designed for. Love the shark fin by the way. Wasn’t sure if it would be any different from other tools I have but I really find it to be a game changer for my work ❤. Thanks again for sharing your creativity.
@alexandriapottery3 ай бұрын
I'm so glad you loved the project! I'm always using tools in creative ways, so it's cool to hear others are doing the same. And the Mini Shark Fin is my FAVORITE! It doesn't seem like much...but it really is the best! Thanks for your input and kindness:)
@johndemeen55753 ай бұрын
Just throw, a chuck, out of clay. No need to buy. No offense intended. St.Paul,.Minnesota.
@alexandriapottery3 ай бұрын
Thanks for your input friend. We have many people who cannot throw a level chuck, do not want to store greenware, have cracked their bisqued chuck or want the automatic centering function:) We know our tools aren't for everyone and that's ok!
@mleaist3 ай бұрын
@@alexandriapottery I work out of a studio in an art school. If I worked with bisqued chucks it would just be one mor heavy thing to bring back and store in my cubby for the term with risk of breakage. This looks like a useful, lightweight tool to add to my toolbox!
@alexandriapottery3 ай бұрын
@@mleaist Thanks for your perspective! We know everyone works differently and we love that. If you ever try it, I'd love to hear how you like it. Happy making!
@maridan43863 ай бұрын
Hi , I think this is an interesting tool. Please where can I buy it?
@maridan43863 ай бұрын
@alexandriapottery please send me the link for this tool.
@fruitlessbeast3 ай бұрын
So few likes? Deserves more. A lot.
@alexandriapottery3 ай бұрын
hey thanks!
@mudthrower85494 ай бұрын
What size is the template for a tall travel mug?
@alexandriapottery3 ай бұрын
Hi! You can use the template for whichever size you need and just add the 2, 2.5 or 3" on to the top.
@IOSARBX4 ай бұрын
Alexandria Pottery Co., I loved this video so much, I had to hit the like button!
@alexandriapottery4 ай бұрын
Thanks for the love!
@mystierichards82524 ай бұрын
Yes I love the rim former And ty for sharing your foot is great too with that baby tool adding up a list!
@alexandriapottery4 ай бұрын
The Rim Cones are so great! Thanks for stopping by!
@liianabanana63204 ай бұрын
Cool
@alexandriapottery4 ай бұрын
Thanks! Hope you're enjoying our videos!
@aldeirrodrigues4114 ай бұрын
What a cute result!!! I loved it!! Thank u for sharing this art class🙏
@alexandriapottery4 ай бұрын
I'm so glad you loved it!! I just posted the second part where I use this clay to make a pitcher:) I hope you enjoy that one too!
@darwin123434 ай бұрын
I recently bought a couple jigs from you but I can't find the digital template download for my jig size on your website. Can you point me in the right direction to find those templates?
@NancyStrahinic4 ай бұрын
That happen to me too.
@alexandriapottery4 ай бұрын
Sorry there was trouble with the uploads! We’ll have them loaded today!
@alexandriapottery4 ай бұрын
Sorry there was trouble with the uploads! We’ll have them loaded today!
@lindatortorice93564 ай бұрын
Vinegar slip? How does that work? Liking what I see on your videos. Inspiring.
@alexandriapottery4 ай бұрын
I use vinegar + my clay body to create a slip. Or sometimes I use just plain vinegar. Both create a really great “glue” for attaching. I’m glad you’re inspired! Thanks for stopping by!
@erikabearden6084 ай бұрын
Love love building with these jigs.
@alexandriapottery4 ай бұрын
That's so great to hear!
@vickivanriel68604 ай бұрын
Where do we get the silicone bands?
@alexandriapottery4 ай бұрын
I source mine on Etsy and Amazon.
@pindebraende4 ай бұрын
tapered step mug.. that's a fun name for the cursed Stanley cup
@alexandriapottery4 ай бұрын
nice...and without the hard metals
@aldeirrodrigues4114 ай бұрын
Thank u for teaching so good about this art. The best wishes from Brazil. I love to learn with your videos. They are amazing and you explain well everything about the Clay Art. Congratulations!!
@alexandriapottery4 ай бұрын
What lovely words...they mean a lot to me. I'm so happy we are serving you well friend! Thanks for following along:)
@aldeirrodrigues4114 ай бұрын
@@alexandriapottery You are welcome! In true your Channel deserves to be visited for a lot of people. Anyway, u have to go on doing the best as u do. I am glad that KZfaq introduced it to me. I am not profissional, but like to creat, using the clay. Who knows one day I will learn 😀