Wish I had seen this yesterday before I did mine. Tons of stuff in the alpha 2, but nearly nothing on the gen 1.
@josedj116 Жыл бұрын
What is the size of the water sending tube?
@Davesfishinghole Жыл бұрын
What are the two small holes on the water pump base for?
@ericreese38 Жыл бұрын
When I turn my bike to accessory my hand controls work… plugged a data chord into the back usb but it just says no device.. when I first plugged it in it worked. I crank my bike and my hand controls won’t work… any help from any is helpful…. Thanks!
@federicoabramzon9978 Жыл бұрын
great video. thx
@Arcturian1111 Жыл бұрын
Put the water wheel down first then the housing. Much easier. Thats the way its done in service school, i learned that trick online.
@jasonnester9514 Жыл бұрын
I’m dealing with my motor not sucking in water I noticed there is also a water pump on the engine how exactly does the water pump and impeller work as a whole and how do I know which one is broke
@Jason-un9ps Жыл бұрын
The water pump on the engine is for coolant or "fresh water". The impeller he replaced sucks in actual water or "raw water". Look up Mercruiser closed cooling system for a diagram of how it works
@kaylashosho6852 Жыл бұрын
I believe the previous owners of our boat changed ours but didn’t have it full throttle at the helm. Our forward is reverse and our reverse is forward now. Someone suggested they didn’t have it in the proper position when changed? Would this be accurate and how would I repair that? Suggestion please???
@rockyramirez7742 Жыл бұрын
Thanks man at least I have the good one
@andrewduffett3052 Жыл бұрын
Great video.....is this the only way the water cools the motor....I have a 1988 5.7 Merc cruiser inside
@gabrielrosas2323 Жыл бұрын
what are the best 5.25 speakers to run with this unit? i have holes for (4) 5.25 speakers in my fairing
@6atlantis Жыл бұрын
It’s not a screwdriver it’s a 1/4in multi driver.
@Urobotas Жыл бұрын
Отличный обзор! Спасибо!
@MrGamer-lz6ci Жыл бұрын
You can get full polish made in Taiwan you just have to pay attention. Mine are made in Taiwan.
@RobHTech Жыл бұрын
no one is buying that kit for the screw driver anyway.
@ActiveJoe Жыл бұрын
Nice setup there for sure. My 60" Meteor snow blower does a great job too which would be nicer with a cab (we just don't get that kind of deep snow that often). Thanks for posting and sharing. All the best and God Bless. 🙏❤🇺🇸
@jma8352 Жыл бұрын
i still have the 1/4" socket driver passthrough. actually a 1/4" extension with a plastic handle. how much more would it be to include that? the fine tooth ratchets are the game changer to me, thanks
@John.349 Жыл бұрын
Is gun metal better than chrome as far as strenth or is it the same?
@tayler2396 Жыл бұрын
Nice, but you don't play it really loud where it can disturb others, do you? You seem like a nice guy. I don't think you would do what people do in front of my house.
@skipper1552 Жыл бұрын
Fascinating video I hope you don't mind me asking just a dumb question, I just replaced a completely cooked impeller in alpha one gen 1 actually I replaced the entire water pump including the lower housing the question what I have is when I connect rabbit ears and run water to the lower unit should I see water coming out from the guiding tube before I install the lower unit together with the upper one?
@MPAutomotiveCrafts Жыл бұрын
I was thinking on getting a Husky set instead of the Craftsman however I've seen a lot of Husky sets being resold in fb marketplace with a ton of corrosion in the tools, I hope the 262 piece set from Versastack holds better over time, that's what I got from Lowe's.
@mrjameschong Жыл бұрын
very good appreciation my dear ... very good! but, I have bought tools with a gunmetal chrome finish and really that finish will disappear at some point, it will fade... and even more so when the identification of the dice is laser stamped. Even so, the differences are huge... especially in the dimensions of the wrenches. Greetings from Caracas, Venezuela
@BlueEyeTableRockLake2 жыл бұрын
I've got an early Gen1 R type make sure because the base housing is different from the newer MR Gen1s
@stevehoronzy69192 жыл бұрын
Thank you for showing how to open up the IBR bucket I have a 2009 RXT 255is I did it how you showed and it worked perfectly thank you 🙏 I was wondering what setting for normal operation there’s a one and a two setting one to make you go fast and one to make you go slow And then I see those Modes
@deep6predator12 жыл бұрын
you rock, going to save me around $365.00 (thats what they said to replace mine) thank you
@timothydaly41362 жыл бұрын
The gun metal looks just like the black dewalt set I have
@HardCutBully2 жыл бұрын
Did you ever get this thang to pair up
@camplife26872 жыл бұрын
Oh ya, no problems.
@RobtheAviator2 жыл бұрын
The gun metal finish is garbage. I have the set and the gun metal scratches right off .
@cabobs20002 жыл бұрын
Sizes rub off too or are they engraved?
@RobtheAviator2 жыл бұрын
@@cabobs2000 engraved. But still wouldn’t go for it just because you like the gun metal chrome. As that will be scratched and rubbed off after one use
@christopherwalsh77002 жыл бұрын
So what you're saying is the only significant difference is the price.
@jamesglavich14262 жыл бұрын
Kind of a small complaint, but with a choice I would probably go with a rachet that can be repaired or at the least cleaned and oiled. I think these are probably the Stanley design.
@Mr.Thermistor7228 Жыл бұрын
YESSS!!! NO one mentions that the gunmetal ratchets can not be taken apart and oiled!! That is absolutely a no go for me and I instantly went back and returned it for the 72 tooth
@6atlantis Жыл бұрын
@@Mr.Thermistor7228 set it in a cup of oil over night or break it a warranty out.
@iamgermane2 жыл бұрын
Compare to Harbor Freight's 225-piece tool set for $99 on sale.
@mikey3589762 жыл бұрын
Old school mechanic here, back in the day craftsman was pretty good, but honestly its crap. Especially if its on sale from time to time. Then it's crap. There's all type of name brand mechanic tool sets that say this is the best or this is better quality or molded casing to hold the tools. But honestly if you want a good quality mechanic tool set, then may I suggest the Dewalt 204pc mechanic tool set. That tool set to me by far is the best I've seen, and is only $225.99. From good set of wrenches to good set of extension. But hay that's just my opinion.
@GarenP2 жыл бұрын
That one did catch my eye, but lost interest after finding out about their warranty - you have to ship the part back at your cost. Were that not an issue that one would be my favorite of the suitcase style sets.
@theimpaler23172 жыл бұрын
Does the rcbs m500 only go up to 5 grains by detailed increments?
@camplife26872 жыл бұрын
500 grains.
@theimpaler23172 жыл бұрын
@@camplife2687 I know it goes up to 500 using the big weight on the left but on the right side where it goes by small increments for example .1, .2, .3 all the way up to 5. I was wondering what if you wanna measure past 5 in smaller increments say like 7.2 then you just move the big weight to 5, and the small one to 2.2? The only reason I was asking because when I looked at the ohaus 505 it has 3 weights on the beam instead of 2, and their small increments go up to ten, but it only confused me for a second, then I realized you can do the same measuring up to 10 and so on, with the rcbs scale. Sorry for the long comment, I don’t know if you understand what I meant but I got it figured out, thank you!
@traviswhitworth65062 жыл бұрын
Lowe's has the 121pc gunmetal for $99 right now.
@camplife26872 жыл бұрын
Awesome! Christmas time seems to be the best time to grab a deal on these.
@briha31422 жыл бұрын
Last week, the 105-PC Gunmetal Kit was on sale for $55.00! Regular price was $139, and that sale was only for about 5 days, as they’re back to $139!
@roberthemsath66022 жыл бұрын
It's a bit/nut driver. If you want a dedicated driver then don't look for it in an all I one kit. In my opinion they nailed it with this kit, but you can't please everyone.
@kgkjack2 жыл бұрын
Nice radio. Biggest complaint is settings. The menu system is horrible.
@joelowen4752 жыл бұрын
Nice head unit just need yellow wire directly to the battery and black wire directly to chassis ground that way amplifier does not burn out cannot pull all power through the red wire you may burn out your fuse box or ignition accessory
@doggoswift68963 жыл бұрын
How's the fishing over at Mud?
@camplife26873 жыл бұрын
It depends one what you like. If you like catching hundreds of yellow perch, hornpout and chub, it's pretty great!
@Kim_Jong_Un523 жыл бұрын
I bought the gunmetal chrome set after using the black anodized set from husky for a few years. Once I saw that gunmetal chrome, I knew I had to have it. It's such a great looking finish and just feels solid!
@mitchndjnmtch3 жыл бұрын
I AM ASSUMING YOU ARE STILL WITH US.
@mitchndjnmtch3 жыл бұрын
HOW DID YOU GET THE SEAL ON THE COPPER WATER TUBE INTO THE HOLE IT HAVING A LITTLE NIPPLE ON IT? GOING INTO THE UPPER CASE.
@camplife26873 жыл бұрын
I'm a little unclear on the question....
@mitchndjnmtch3 жыл бұрын
@@camplife2687 Where the copper water tube that is in the upper stern drive goes, there is a seal that has a round portion on the side of it. How do you insert it in the hole without destroying it? After you get it in there that is were the copper tube goes where attaching the lower unit after replacing the water pump.
@mitchndjnmtch3 жыл бұрын
In the video, when it starts, it is on the copper tube. in the lower unit. When I replaced the water pump and installed the lower unit I destroyed the seal or sleeve. What ever it is called. When pulling the lower unit the thing should stay in the hole as it has the nipple on the side of it.
@camplife26873 жыл бұрын
Grease my friend lol. Get that seal installed, make sure you have a new tube or your old one is well cleaned up with no burrs. Grease it up well and slide it in straight.
@mitchndjnmtch3 жыл бұрын
@@camplife2687 The old guide that the tube fits in is in the upper unit and has a nipple that fits in a hole in the side. How do I put a new one in without destroying it. Do I bend it and push it in and pop the nipple in the hole?
@GainingDespair3 жыл бұрын
I could be mistaken but I think the foam pad at 2:25 is used by Stanley, I know they make some Craftsman parts but now I kinda wonder if they make that one as well.
@ocaaron43 жыл бұрын
well stanley black and decker owns craftsman
@AndyJWilcox3 жыл бұрын
I just wanted to thank you for this video. As a kid, my mom tried to get me to hike Haystack. She is from Mapleton. I couldn't make it up it because I had asthma really bad. Just hiked Mt. Washingon and Katahdin this week, but made the trip to Mapleton in between as a full circle thing to do. Climbed the trail and stayed to the right where it was a sheer climb up rocks and with a wife and two daughters at home, out there alone, felt an enormous amount of anxiety. Felt like I was about to go 0-2 at Haystack for different reasons. I watched your video before hiking and pulled it up when I got down from the sheer ledge. Determined that a good dad like yourself would in no way allow his kid to attempt that sheer climb, that I missed a turn somewhere. Took me from frustration and anxiety to hope, and sure enough down a bit the path veered to the left and up the back where you came up. It's a .5 mile hike, but it meant a great ton to me to exorcise the demons of that 12 year old kid with asthma that couldn't make it years ago. Thank you for the video and paying forward some hope that you probably didn't expect when you shot it.
@camplife26873 жыл бұрын
I'm glad it helped you. It truly is a beautiful view up there, unrivaled by much. Wish I would have had the better camera that day.
@danielcarter55793 жыл бұрын
I was told that id have to run a bigger ground for the built in amp
@danielcarter55793 жыл бұрын
Just put a down payment for one of these when another business sold their last one, this business is getting theirs monday