It’s coming along very well! Shhhhh! No jinxing us! 🤣 This is the first year we actually have been doing well with growing anything! 🧅🥔🧄 - ✅ 🎃🍅🥒 - ⁉️ 🥕🫑 - ❌

Thank you! We are doing much better this year than any other!

This has been our best year so far for the garden! We are hoping to have a good amount of potatoes to eat fresh or store for the winter.

They were great! We made homemade baked French fries with them to go with our farm raised chicken for supper! 🥔🍗

Thank you! I (Jenn) absolutely LOVE how it turned out! 🃏

Thanks! It was well worth the work for the few weeks to be able to have enough chicken for the year or close to it!

It was so busy but so rewarding!! The pigs are quite a bit of enjoyment as well! Thank for supporting our channel!

é uma construção fantástica! ótima configuração! gostaríamos de atualizar nossos tratores de galinhas antes de criá-los novamente!

@@WithoutAPlan-nu5tn 🖐️👍

obrigado por conferir nosso vídeo! nós realmente gostamos de criar aves de corte e somos gratos pelo que elas proporcionam para nossa família!

@@MacCustoms 🥰😘🇧🇷

@HomeIsBehindTravel933 adoramos saber de onde vêm nossos espectadores!

@@MacCustoms Qual seu nome afinal, mulher maravilha loura!

Thank you! It feels great to have our freezer full already!

Such a great way to spend the afternoon!!

Oh noooooo! I wonder why they aren’t into them?! I found the nipples messy in the barn but outside they are great

@@MacCustoms I think we didn't train them when they were young enough🤷‍♀️

@farmtroverts oh that may be it! Darn! Hubby said he’s been told that it’s important to have the nipples at the heights the pigs are currently at when you introduce the nipples and to introduce them by holding down the nipple for them and letting the water flow, they will get curious and start to poke around them trying to get the water!! Might be worth a try!

We will take a second look! Seems to ride fine as it is but always worth rechecking

No it needs power from the key

It’s a good thing I’m laid back and stuff like that doesn’t even bother me 😂 (- the wife)

I’m not certain off hand but I have only come across two or three different forks on KTM’s so there is a high probability they are the same

@@MacCustoms awesome thanks they look the same i guess ill know once i tear into it, never done forks befor wish me luck haha

@Conkersnothalfbadday you got this! It’s not too bad of a job

It is a big issue with these bikes. It’s where I would start looking for the problem but I can’t say for sure. If there is compression and spark it would leave a fuel issue

Thanks girlie!! 🥰 you helped us so much with your video! So far we haven’t mounded them 😬 I’m thinking about doing that soon if they look like it’s needed

Thank you! We are very happy with the progress so far! Hoping for lots of potatoes! We had just recent learned about the determinate vs indeterminate potatoes from another homestead friend!

Yeah everything on the bike was stock 👎🏻 it was just something for the wife to rip while her Raptor was being built. We found it hard to find anything for this bike unless you went to an Arctic cat dealer

@@MacCustoms ...thanks. 👍

@mikehoncho7165 sorry we couldn’t be of any help!

@@MacCustoms .....no biggie man. Just trying to get a little more low end. Doesn't seem to be much out there about the DVX 300 in the forums.

The hot tub worked great for a couple of years, recently we dismantled it and repurposed the material after the coil split (because we forgot to drain it and it froze overnight). The temperature can get very very hot, to the point that you may need to add cold water if you have a big enough fire. Most times it was about 105-108 consistently. The heat up time can vary between 3-7 hours. The water will start to mix within 20-30 minutes but you have to remember you’re heating 900L of cold water in 60 ft section at a time so the more copper coil and the thicker of coil you use will affect the volume that can be heated at once!

Hauling wood can be a challenge for sure! We love this little ATV log hauler that we designed with random parts and pieces we found around the yard! The crane is ideal when you’re working solo or have like you said the big stumps!

We’ve since added a bumper jack as a movable stabilizer!

Thank you! 💪🏻💪🏻 Got the job done (with a little help!)

I don’t always use them, or I’ll run them off the headlight relay. I don’t think the LEDs draw enough to use them but some customers want them and purchase them so I’ll use them in that case

@@MacCustoms ok cause the harness came wit them but I couldn't get it to work so I cut the fuse and relay out but see everyone else using them so got kinda nervous

@@MacCustoms thanks for replying so fast

@browxprideloco13 you are fine without! Where they come with it I feel most people think it’s necessary!

That’s what we want to hear! We hope it helps people who want to do their own repairs but may need some guidance!

☺️thank you! We always appreciate your support & are glad to know you are enjoying our homesteading journey! Everyday is a learning experience around here and it’s all about being able to adapt and improve!

The water hauler saves a lot of bucket carrying! The shelter frames worked so well! This is our third or fourth batch of meat birds to use it already!

I had no issue. I think it's an awesome video. Click on the "CC" (closed caption) button at the bottom right of the video if you want subtitles...

I think subtitles need to be turned on by the viewer

We’ve been hearing that some people have sound problems when not viewing using the app 🤷🏼‍♀️ glad to hear you didn’t have any sound quality issues!

Don't take it personally, the accent and quietness of the audio made it hard for me to comprehend. Not your fault at all. Otherwise good information and worthwhile viewing.

@michaelnewman5734 no offence taken! We appreciate all feedback to help improve future videos!

We are happy to hear this! Thanks for watching and supporting our channel!

Some of our older videos unfortunately have poor sound quality, newer videos the issue has been resolved

We can’t wait to see the results! Seemed like a cool experiment to try!

We are hoping it works out! Seems easy enough to be worth trying! The tree out front grew leaves and is doing well!

52:17 glue is there because it is a sleeve the piston is in and it can get oil leaks there and around the push rods. Someone had bored out this engine and then it arrived to us with a bad leak 53:14 that’s a metal gasket that was put on there (multilayered steel gasket) Sound has since improved since then we didn’t have a microphone back then but had since added them! Thanks for checking out the video and supporting our channel!

Thanks! I appreciate the kind words! & if I can learn to do this stuff anyone can!!

☺️ thank you! We do our best to not spend much money on projects and can always find innovative ways to get the task done! We are so happy with the watering system so simple and makes it way easier then carrying buckets of water down there!

Because the throttle was stuck on 😂

@@MacCustoms mint also how good do these bikes work for fast trail riding

@Official_flynex not so much fast trail riding they are designed to be trails bikes. They are registered as street and trail and have signal lights and such but again no speed for highway, just useful for getting from trail head to trail head mostly. They are huge in Europe though for the Trials competitions

I find it difficult to see why trials isn’t more popular, I can’t wait to get a trials bike and fall down in a mud puddle at the age of 57

@walterkersting9922 😂 it’s extremely popular in the UK but not so much in North America unfortunately.

We figured it was worth trying to see if it would work! So far so good! I laughed at the “pinched my fat” 🤦🏼‍♀️ and “chickens won’t even notice” also had me chuckling! 😂

Thank you for the support! We very much appreciate it! We never had the chance to try installing electric power steering on a lawn tractor unfortunately

Thank you!! We are very pleased with it and happy that we could repurpose a bunch of stuff that was of no use on its own but made a very valuable item when put together!!

Thank you! We are very happy how it turned out!! & we have lots of upcoming builds and endeavours to share!

Thank you so much! We love sharing our day to day activities around the homestead! And we very much appreciate the support you offer our channel! 💕

With the right mindset every project can be this easy!! 😂 I wish our last name was MacGyver it would be so fitting, we are from a different Mac Clan tho. Thank you so much for your continued support to our channel we always appreciate the comments and views! Cheers to you and yours also!

This machine won’t see anything but dirt roads and flat sandy beaches. It’s not only widened 6 inches but lowered 6 inches and handles like a motherf*er!

He did an amazing job making that fender bracket! Not too much longer for the Raptor to be revealed