Yea absolutely, if you are running an old filter then why not upgrade!
@thatstreamingfella7298Күн бұрын
Thx Adam. Did this today flawless. It was a smooth process.
@AdamRainey14 сағат бұрын
Nice one mate!
@BARNEY_13373 күн бұрын
This has to be one of the best cheapest and most effective mod you can do to most cars. Ive done this to my mk3 focus, i have the smoked version for my black car.
@RichardCharnock-j6z3 күн бұрын
Cool man. Can you measure the springs? How tall and wide for me cheers pal.
@iandegruchy94424 күн бұрын
How many pins did you get Adam? Are they the ones sold loose at .16p? Is the postage much from the US? Thanks
@gavinedward57818 күн бұрын
Fitted PCV plate and Catch Can from Radium at the weekend - once again thanks to your excellent 'how to' video! Keep up the excellent work Adam.
@AdamRainey8 күн бұрын
@@gavinedward5781 awesome mate, cheers!
@gavinedward57818 күн бұрын
Hey Adam. Quick question. I've bought a snap in racing harness ahead of tracking the RS and looking to fit eye bolts like you did. Bought a set of 4 M10 eyebolts thinking all were same 25mm, however, seatbelt anchor at base of B pillar is 45-50mm long. Did you manage to source a longer eyebolt for this position or just go ahead and remove the 10mm spacer? Many thanks as ever for your videos! CheeRS.
@musicx.16848 күн бұрын
Hi. Great install thank you very much. I now did exactly the same with my own RS. The only thing I changed is I used 2 Fuse connectors with 15A each because of the thin cable. Unfortunately I now have a problem with my sub. While driving it just shuts off and I don't know why. Sometimes after 5 min sometimes never. Once I had no sub straight after starting the car. Power connection is good. Even the LED on the sub is still green without any sound. So I'm guessing it has to be de sound signal. Connections there are good even a wiggle does not bring the sound back. Just shutting the car off waiting for 1-2min and starting it again will fix the problem. Any ideas about that? Would really help me.
@johnbevan71578 күн бұрын
Absolutely excellent fella 😎
@mikiletful10 күн бұрын
Fresh
@dmcracing10 күн бұрын
Original RS badge Adam
@joebelmont447011 күн бұрын
I would NOT recommend cyanlabs. They download all this crap that takes over your pc. I got everything except sync 3.4
@Geraltski11 күн бұрын
great stuff as usual!
@AdamRainey10 күн бұрын
Glad you enjoy it!
@GrahamBlythman12 күн бұрын
Looks awesome Adam, but it's an RS focus it deserves to wear that badge 😊
@RobinvdTube12 күн бұрын
Well done man! Now i want it to 🤣
@AdamRainey10 күн бұрын
Do it!
@RobinvdTube9 күн бұрын
@@AdamRainey Where can i buy those carbon thingy's? 😇🤭
@AdamRainey9 күн бұрын
@@RobinvdTubeI kept an eye on ebay for deals for the front splitter and seibon fog light surrounds. The Red5 items you need to message them directly on Facebook or Instagram and put in a custom order
@RobinvdTube9 күн бұрын
@@AdamRainey ah thanks for the info 👍😎 gonna try that then
@alandonnelly978812 күн бұрын
Adam that looks absolutely f#####g amazing mate what a great job I would go with the retro RS badge paintmodz stuff is so good I should know & it will make the carbon fibre stand out DO IT MATE 😀 🎉,
@markrickelton116712 күн бұрын
Well done Adam. That looks amazing. Original rs badge bud. Every time
@thijsrooijakkers215312 күн бұрын
About the rs logo on the front; I don't know if it is to your liking, but there are also light up rs logos for sale. I got a light up st badge on my Focus st and love it. Edit: will people get the change to see this beauty at Ford Fair this year in next year?
@jeremybell263812 күн бұрын
White rs badge
@F56Max14 күн бұрын
So essentially those wheel bolts go through the wheel, through the spacer and bolt in from behind as original ?
@AdamRainey14 күн бұрын
@@F56Max yes indeed
@RicardoRodriguez-zw5lb16 күн бұрын
I don't know excatly this Sony System, but I guess a passive crossover could do a huge difference in that system.
@paulclarke327417 күн бұрын
It seems you need an awful lot of pumps to do one wheel, and considering the bottle is 500ml it’s pretty much a bottle per wash. As a customer I’d be reluctant to buy purely on the amount of product per purchase. I do use Sam’s detailing products and by no means am I a troll, bigger bottles please
@patrys5432119 күн бұрын
Hi i have Ford mondeo mk4 2.5T is this compatible and I am struggling with the feel on 1st and 2nd gear at times pedal feels little amount of feedback, need someting heavier and with better feel, will this be the right item to buy?
@SVR010121 күн бұрын
Will this fit normal focus?
@jasonbaird384826 күн бұрын
Nice clean job
@AdamRainey23 күн бұрын
Thank you! Cheers!
@johnnybunn716527 күн бұрын
Just bought the centre console trim and door handles too looks fantastic cheers for the video very helpful next up is that plastic armrest 👍
@AdamRainey23 күн бұрын
Glad it helped, cheers 😊
@Govester127 күн бұрын
Awesome video and content Adam! Found it whilst researching intake options, I'm not keen on the Eventuri fluffy soundtrack but this Forge is great. This is an excellent installation guide, really appreciate you putting it together 😊
@TTGT2000Ай бұрын
good job. still happy with the REVO wheels? at 10 kilo they are very tempting to buy for my RS from a performance enhancement perspective. They seem robust enough for all kind of roads.
@verjanssamАй бұрын
Just received this kit. Also no installation guide included so thx for this video, it will help me allot!
@AdamRainey23 күн бұрын
Glad it helped!
@david79rcАй бұрын
I always follow you, why don't you make a video where you show only the best essential modifications you have made and tested, which really improved the car?
@hickhack9016Ай бұрын
Do these speakers require a amplifier?
@AdamRaineyАй бұрын
No, as the video shows, they are plug and play replacements
@fordyfordАй бұрын
Nice to see one made in carbon vs the 3d printed ones. Real carbon is always stunning to look at 👌. I wish some more of the Cobb/U.S products suited the Euro built Fiesta ST.
@alandonnelly9788Ай бұрын
Nice job adam mine was a nightmare 2 fit on my st did it with the bumper on wasn't easy at all but looks so cool😅
@KeithGibbons-tv3jlАй бұрын
What happens when your driving against heavy rain can water go up and into the air box
@AdamRaineyАй бұрын
Not likely, the distance it would have to travel against gravity is too far to worry about unless the rain is being blown by a hurricane or something
@dave130r4Ай бұрын
@@AdamRaineyTo be sure just avoid driving to close behind other cars in the spray, there are stories of engine damage with big snorkel like intakes.
@AdamRaineyАй бұрын
@@dave130r4 I tend not to drive close to anyone where possible to avoid stone chips
@dillonpudge9002Ай бұрын
First 😎
@grahamprescott9426Ай бұрын
Would be keen to get these if they made a mk3.0 version? Would be nice to update my 2013 ST
@F56MaxАй бұрын
If you pull the hard pipe up then press down again can you hear a little click again?
@martcornАй бұрын
When I put mine on I found it easier to take mirror glass out then pop it back on when finished . Speeded the job up
@BritishSocialite17 күн бұрын
How do you take it off without breaking anything? I tried it once and I broke the motor arm that make it move.
@martcorn17 күн бұрын
@@BritishSocialite It just pops out and back in again
@BritishSocialite17 күн бұрын
@@martcorn I did manage to pop it out, but in doing so it has broken a vital piece that allows it to move up, down, left and right. It goes back in with some wiggling, but I can't use the electronic control anymore. Using a screwdriver works best for me, despite it being a pain to use.
@martcorn16 күн бұрын
@@BritishSocialite Think I must have been lucky then . I was doing it on 1.o eco and not an st so that may have something to do with it
@BritishSocialite15 күн бұрын
@@martcorn Maybe I have a '14 ZS 1.6 TDCI.
@mmcgready4566Ай бұрын
Hi, iv been trying for these. Still, no joy when i contacted ab the link they sent the pins were in the middle and not on 2 side . Is it possible for you to send me a link for these in your video please. Thank you..
@SinCityAMGАй бұрын
Other than the lack of the silicone coupler, how does this compare to the Dinan one?
@AdamRaineyАй бұрын
I'm not familiar with it mate
@Drone626Ай бұрын
Great video, is it still a good product?
@AdamRaineyАй бұрын
Yes indeed, I have bought more since!
@Drone626Ай бұрын
@@AdamRainey Thank you. Am I ok to use it even though my car isn't ceramic coated?
@AdamRaineyАй бұрын
@@Drone626 yes
@chomp098Ай бұрын
AWG stands for American Wire Gauge,
@scottmetzelАй бұрын
What’d you use to install the bushings?
@seanryan3025Ай бұрын
I love the idea of using titanium bleed screws which are less likely to corrode. Does the Focus RS brake setup use M8 or M10 bleed nipple screws? Are the front and rear bleed nipple screws the same?
@ollybell106Ай бұрын
Would i see any benefit from using these on a standard RS? Not planning on getting it tuned anytime soon
@alexxxidlbi2 ай бұрын
i can do that on my ford puma st ? :D
@williambolton0132 ай бұрын
Coming from a focus st and now own a rs I hate the gas tank size 320 mile range to 205 miles 😅and the 110 dollar oil changes due to the 5w-50 oil 😂
@stephanschmitt98872 ай бұрын
thanks for the instructions! Question: as you're not using the amp remote cable (blue), will the sub run all the time while ignition is on?
@AdamRainey2 ай бұрын
Exactly, yes indeed
@martinneal19092 ай бұрын
Hi Adam… u inspired me to purchase these autobeam lights However… after my purchase.. installed them.. But having issues with indicators flashing super fast…. I do have a ghost immobilser fitted… once ghost code is entered. They start to flash fast Do u know of a solution at all?? Thanks in advance 👍🏻
@AdamRainey2 ай бұрын
Hi Martin, not an issue I've come across tbh. Your best bet is to contact autobeam directly to see if they can help. Cheers mate 🍻
@martinneal19092 ай бұрын
@@AdamRainey Hi ya pal. Thanks for getting back to me….. have got in touch with Autobeam via Facebook messenger(rubbish) Not heard anything back as yet Also think one is faulty as sidelight doesn’t light up the full length :( I’m assuming it’s my ghost causing my issue. But thanks for all ya help Keep up the cracking videos I do watch ALL your content 💙
@AdamRainey2 ай бұрын
@@martinneal1909I wouldn't assume that your ghost is the issue, like I can't work out why that would do anything to your lights. Just keep bombarding the messenger until they respond
@martinneal19092 ай бұрын
@@AdamRainey Hi Adam Plz may I ask what units u have in the front of yours?? Are they Autobeam highest resistance? They have got back to me saying it could be the resistance in the front indicators
@AdamRainey2 ай бұрын
@@martinneal1909 yea my front indicators are the high resistance autobeam and then headlights are autobeam performance led d3s. Currently stock h1 cornering bulb but that will change soon
@139650822 ай бұрын
Do you require a heat shield? The oem comes with one but it doesn’t install onto the mountune downpipe.
@AdamRainey2 ай бұрын
No but if I was to do the downpipe again, I would wrap it using funk motorsport titanium exhaust wrap
@139650822 ай бұрын
@@AdamRainey and what’s your reasoning for that may I ask?
@AdamRainey2 ай бұрын
After doing laps on the nurburgring, heat management became an important consideration for me for track use. Normal every day running it makes no difference
@139650822 ай бұрын
@@AdamRainey ah! Ok well I’m only really using it for daily and a few spirited runs. Guess I’ll leave it. Really don’t want to pull it off again as it was a PITA to install