This is great stuff. I am saving this video. Thanks Ewing Team

The most confused point is to set up the left starting point. Not working at all !

Thank you for this concise info, I replaced my old R50's with 5000PC's, Your video taught me how to adjust as a first timer. Thank you

Hoy revisé unos 20 Aspersores i25, y 4 no giran tienen 1 año de instalados, la cisterna está completamente limpia y no hubo roturas de caño

Consulta, con una presión de 2kg. cuántos aspersores puedo alimentar?

Thank you. You solved my issue😊

So… guess and check. Create a zone test. Plug sprinklers off until you get the performance you want.

Water just shoots straight out of the top. I bought 4 of these, and they all do this! This is crazy!

How do you adjust the left side if it’s too far?

How do we use submersible pump in pond or river for irrigation ~ 2 acres of new grass seed daily ?

En el caso de mp rotator, se recomienda el traslape?

When adjusting the spray head set screw I get dripping from the nozzle down the tube causing the dirt around the tube to wash away, is there any other way to adjust the spray?

Como puedo aplicar este sistema en una carretera

What if I’ve been taught to use both thread tape and pipe thread sealant on each connection?

Watch video once, remain calm then actually go outside. Take phone and small flat head screwdriver to sprinkler head. Restart video pausing as each step is explained and accomplished and it all falls into place. if you have compatible rotors you will look like a boss. Not that complicated it is just unfamiliar. Also approach this task expecting to succeed or hire it done instead. Thank you for the no fluff straight forward instructions EOS!

Write the directions down step by step and it will make way more sense.

how do you justify $500 to close and $500 to open?

No one seems to know cure time for pvc adhesives on pvc water pipes...5 minutes, 5 hours, ... no one knows.

Well this didn’t solve my problems and isn’t correct, mine the rotation is opposite, So the fixed side how do you set that? Turn the entire sprinkler?? That should’ve the 1st thing he mentioned! Can you just turn the head to the right to set the max and adjust the left? I don’t get it

A very clear, and helpful video. Thank you.

Professionals instal rains sensors over conduit standing up, oll wire get hidden and the plastic pipe allows you t place it at the best location. No screws or drilling any where is required. No ladders or drilling on fascia, easier to maintenance!!! No visible wires to the wall!!

Wrong

So there's no nails in of turf? Y only border?

I don't know why but the increments that Rainbird uses is often 18, not 20.

You people (Rain Bird Designers) are both Idiots and 4sspoles. Turn it all the way right the left till it stops, then turn it MORE Left to where I want it? Then right again and left again then use a screw driver??? WTF! Why not make a 90 degree, 180 degree, 360 degree and for that Rare and poorly designed corner of a patio a 270 degree. No adjustment needed, just buy the one you need. Sure, OK, make a 360 degree you can adjust, just for the engineers to over charge customer $$$ to set them for them ever few weeks. Trust me I like Old Fashion Hose and Sprinkler. Just looking at this because my Mom feel for the sales pitch and no one seems to be able to adjust them. Even the guy that put them in.

thank you

Saludos ayuda , tengo un área de 25 metros por 70 metros y una tubería pararela de 1" pulgada mi bomba es de causar de 3 hp , necesito saber cómo colocarle riego por aspersión

What’s the plastic black covers on the brass, some of mine are missing.

Do you need to have it off when adjusting the left to right radius?

Thank you!

What is the most economical way to boost irrigation pressure from the city residential recycled water service? This has become a fiasco in Jacksonville FL.

Nice presentation, thanks.

Thank you! Helped me for sure.

How dumb. I don't have that tool. Why don't they just keep it simple with a screw driver. Fawkers

I've had systems both ways. The way you recommend is truly a PIA when you need to change the flow to a plant that is bigger (needing more water), or change the plant to something else that needs less water (eg, changing a broad leaf plant to a succulent). To do this, you have to dig up the entire dang line to find the main tube and emitters. I'm in a situation where I'm having to pay someone to dig up an entire side of my yard to deal with flow issues, and it's because of it being installed the way you recommend. NEVER AGAIN.

Thank you. It is indeed the best video on this subject.

Thank you.

Sirve para drip

Can you explain how a outdoor spigot is ok to install on the house water side (inlet) of the backflow preventer. Couldn't you still get contamination into the house water.

This was a really great explanation of how to do this. You made it very simple to understand. Thank you!

First I Saw From Progressive. Tempo, Whatever they Brand as, Personally I Think the 620 is the Best, Slide the Switch From Off, Tone, Normally Open, Normally Open with Latch, Normally Closed, Normally Close with Latch. Momentary Connection of Leads Will Sound and Light as long as they are touching. Normally Open With Latch. A Momentary Connection Will Continue to Beep Til Reset Button is Pressed, Normally Closed Work Simullarily. A Note, When Toning Like You were Doing, Sometimes The Signal will Bleed onto Several Wires. When You Find a Pair you believe it to Be, short those 2 together, if it is correct Pair, tone will be gone, if you touch and still here tone, you are not on the Right Pair. Can't Live Without Mine, I Troubleshoot Most Everything. Identifying Coax, Phone, Network Wires. For Cable TV, a New House, Start with putting Signal at Cable input from Cable Company, or Satellite Dish. Then go inside, Find that Cable/Wire, That is Input, All Others Are Output. Or if only using a select Few, Go to master bedroom and Connect Toner to Coax AND Network Wires,(Blue Pair?, Any Pair, go to where all homerun to, And Locate both at Once, Repeat as Necessary. Cars and Boats You can Follow to where the Break is, or Where it is Running to. Testing Fuses. Great on Photo Beams, For Gate Operators, Place on Receiver contact, then move Reflector up and down, left and right to align to Center. Can Place on Wires on an alarm Panel, open and close door(magnetic contact) to hear if it is working. If testing a Pair of wires and to far to Hear, Then the Latching works well to identify, Can't Work without Mine, Is Others With Using Voltmeter and Continuity Tester, The Time to Troubleshoot is Criminally Longer, Customer Pays a Big Price for the Extended Time to Solve, And Customer doesn't know any Better, Just Thought It Must have been a Really Bad Problem, I Feel Bad For Them. Is a MUST have. A Quick look at Your Sprinkler Tester Adds a Voltage Tester. But Only 24 Volts, Better to use a Multimeter as You can Check for 120/240 as Well. I'll Read Up on this Sprinkler Tester, But Don't Feel it Could be Better. If Troubleshoot and don't Have the 620, along with the 200 Inductive Amp, You are Playing, not Working. Randy, Strategic Electric & Security. Good Luck.

You took the time to explain in such a simple way. Thanks a million!

can you adjust the pressure/power on these?

Excellent presentation..

Does the high gloss sealer make the pavers slippery?

Do you prefer stapling or nailing? which is preferred method.

Translapadas?

I watched this a bunch last year and this year because it is the best video…even though I’ve been very confused with these instructions but just now figured out an IMPORTANT key feature left out which is: to adjust the side motion you turn the Entire head to the left with your hand and if it is going to far left you crank the entire head to the right almost forcing it to a point that felt like I would break the cheap feeling plastic

When using concentric circles on a newly planted tree should the inner and outer ring have the same emitter spacing and GPH?

One of the worst vids ever posted - worthless