Thanks, Dustin, you helped me out a lot, I appreciate the help...

Do you have a video that explains how to wire the brakes on a tandem trailer with the breakaway box? TIA

Gracias amigo

Thanks!

Thank you for a very clear video for wiring these correctly. I had to completely redo a dealer's job that had my right turn signal applying the brakes. Your explanation made it very easy to rewire in the proper locations of the truck's connector. I appreciate it.

Excellent job explaining what I need to know. I'm tired of using the LED lights and still needing a hand help light. This sounds like the fix. I've got a 17.5 foot Crestliner aluminum boat, and from what I understand just 2 lights will give me all the light I need to boat safely on the lake at night. Thanks very much!!!

Hi Dustin i just bought a 21 foot (dual) pontoon boat with a 2019 F70 on the back with an Outboard EFI tune so I am told it is pushing 85hp. I'm topping out around 18-19mph and ~5100 rpm on the tach not sure how accurate that is. It does not seem to make great deal of difference with two, three or four people onboard or a full 26 gallons of fuel onboard to nearly empty. The F70 is currently propped with a 13 1/2 x 10 1/2 three blade prop which i believe is the stock Yamaha prop. As much as i like the hole shot it would be nice to gain a few mph. What are your thoughts on repropping to gain top end?

I love my NOCO but I choose the cheaper less voltage Chanel charger. It gets the job done while I sleep, no need to get fast charge for me.

Goes completely free hand on a cut, then blames the saw for the cut not being square...🤡🤡🤡

idk man, no one who is a serious welder is going to be looking at a multiprocess machine imo. if you want to tig weld, get a tig welder. if you want to mig, get a mig, if you need both, get both. its not millers fault that multiprocess machines are inherently a compromise.

I just bought one from harbor fright tools for 75 dollars. I was scared I was going to lose a limb, but luckily this thing is such good stress relief. Made me look like a bad ass. Problem is the chain came off about an hour into cutting some large shrubs from the root. So I have no clue how to put it back on. Can you help?

I have seen enough not to purchase one

How much padding is on the back of that pack?

Very good explanation . Hundreds of ways to do this. Yours is the most understandable.

I’m a proud member of Bauer, I save on work tools and pockets are stuffed. 😅

Be forwarned I did this and it was a mess. Nothing worked right. After chasing each wire down my red was left blinker right was brown almost nothing the same. Finally got it wired and later saw a video on rv trailer lights looked back and that’s how mines wired. If u try this and it doesn’t work try rv lighting diagram. It can save u a ton of time. My trailer is a 16’ cargo trailer not sure if that means anything.

Can’t seem to find the links to the actuator did KZfaq remove it?

Good looking refit, I'll say it, you do sme great work. Back in the days before heat shrink, my dad showed me how to make the same loop for anchors, cover tie downs by feeding the end of the line through the middle of the braided poly line. Geez I'm that old. Thanks for bring back memories.

U ARE SUCH A GREAT TEACHER MY FRIEND ...!!! I Love Ur video mainly because I have a broken memory ... but when U related the colors with the position in the connector ,,, Wow .!! That was an enlightening moment for mi ..! Thank U So Much Dusting ..!

Great looking build!

Do a video show how to wire two tanks to one switch

Nice job 👍 really good review.

mine looks the same way. What are you looking at buying replacement parts?

Just bought this chain saw, your video was very helpful. Thank you

Thank you sir I appreciate you

My red wire is the backup light

All the wires work except the 12v power in hummer h2

thank you

thanks bro. helped with my nascar nationwide car: kzfaq.infoHheyapi8Sis

Love my 850 wish mine was 4x4 mine does have loader tho

Bravo Senor, I fixed my problem with your help.

I have this one on my pontoon with 4 batteries..i just got the boat and I’m going to spend time with her this weekend. I can’t wait 😊

Do you know of a replacement guide bar for this saw, the Bauer 20v? Thank you for sharing such helpful information!

What can I say…Your lady likes speed! She’s definitely a go fast girl!😂

You do some nice work

Hi Dustin, are you running these on a generator? If so are you using a power converter?

🤣 🤣

Great video. Does the noco charger require that all batteries be the same type? Or, can one bank be lead acid, and another bank be AGM?

The 5star leds 100w you say will work now? Will one or two work for navigating lights?

Cool video man thanks for sharing and I'm a big Bauer fan as well and that's what most of my tools are because they're actually affordable compared to most brands that just aren't affordable and this is the only charger that I don't have yet and I would like to get it even though I don't really need it because normally I never really run down more than 1 or 2 batteries at once before I quit doing whatever I'm doing so I don't really need this charger but I might get it just to have all of them but what I don't really like and don't understand is since it's the newest charger why does it only charge each battery at 2 amps because the oldest and slowest Bauer charger charges at 1.7 amps but then the faster newer one that is more red charges at 3 amps and then the double charger charges 2 batteries at once putting 4 amps in each battery so I don't understand why this 1 even though it's sequential it's newer so I don't know why they don't charge each battery at like 4 amps each or at least 3 amps each because only charging each battery at 2 amps each is barely faster than the original slowest charger which is really strange because why make a bigger charger that will charge 6 batteries back-to-back but then charge each 1 at nearly the speed of the oldest and slowest charger which I don't understand but I still would like to get 1 sometime if it goes on sale or if I can get a free tool with it or maybe if I buy another battery I might get this if they offer it with it or at least when a 20% coupon comes around maybe then I'll pick it up but I'm not going to pay for it at full price because I do have all the other chargers and I don't really need this one I just would like to have it just like I would like to have 1 of the biggest 12 ah batteries because I don't have 1 of them yet either but I have all the other batteries but I would like to have 1 of the 12 ah just to see how long it lasts and to see how big it is compared to all the other smaller batteries and hopefully it would fit on this charger and all my tools because it looks pretty damn big but cool video man and your ideas of having a jump box in there or flashlight or Bluetooth speaket and all that would be cool but that would just be more things to go wrong plus jack up the price and you can buy the Bauer speaker radio separately even though it doesn't sound that great for music it works fine for watching videos like shows or whatever or audible books and you can get a jump box separately and Bauer has some great flashlights that use the same batteries also but take care!

Hf just dropped the 12ah now.

Help & question? The only light not working on my trailer (7 pin) is rear most passenger red running light. I know its not the bulb because right turn signal and brake lights work. Im thinking I need to check the brown wire to that light. Am I right? The truck is a 24 Tundra.

Help. All my lights work except the rear most red running light on passenger side. I know its not the bulb because it works with right turn signal and brake lights. What should I check for?

THANK YOU SO MUCH! YOU HAVE HELPME OUT SO MUCH. THEIR ARE OTHER GUYS OUT THERE WHO TRY TO HELP AND SHOW HOW TO INSTALL THIS 7 PLUG FOR TRAILERS BUT YOU EXPLAIN IT SO EASILY THAT A 5 YEAR OLD CAN DO IT. MAN I REALLY AM THANKFUL FOR YOUR TIME YOU TOOK OUT OF YOUR LIFE TO HELP ME OUT . GOD BLESS YOU AND YOUR FAMILY, . JOHNNY DONALDSON

What brand sending unit was you demonstrating. Looks like the one I need. I have a 96 polar kraft bass america boat and zero info on sending unit ohms. Any information will be welcome

Im also getting the green light,but when i tested separately the batteries only had 12% charge

I have a 3 bank and my 2nd battery is 2 years old and the charger is flashing all the signs below the meter.I charged all the batteries separately with a different charger and it still happened.Any tips would be great

What broadheads you using?

For 10K you can buy 4 comparable Everlast, Primeweld or HTC models, I cannot justify buying Miller anymore, they have priced out most tradesman and frankly, they are not 100% made in USA machines any longer so, I've made the switch.

Thank you