I guess they gave up? Didn't think the torque and the conversion of power would be too much? But its probably the price? because it looks expensive.
@ciscometal17 күн бұрын
Hi, so when installing the chain, it does not matter the size of the cassette, right?
@CeramicSpeed9 күн бұрын
Hi, Correct, as the chain is measured for the longest length possible while maintaining the minimum required chain tension, this will accommodate all approved cassette options for a given group set. The length of the OSPW cage makes this possible.
@ciscometal8 күн бұрын
@@CeramicSpeed Awesome. Thank you very much for your answer. 🥰
@ciscometal17 күн бұрын
Hi, so when installing the chain, it does not matter the size of the cassette, right?
@EirikkinserdalАй бұрын
If the bearing knocks under load, is it broken or does cleaning and regreasing it work?
@CeramicSpeed9 күн бұрын
Hi, It is unlikely that it would be broke. A knocking sound is most often related to lateral movement, either from preload spacing, cup in frame, or bearing in cup fitment. Checking and adjusting each of those as necessary would be the correct path.
@Eirikkinserdal7 күн бұрын
My bb is a t47a. I tried with another brand of BB and the knocking dissappeared. Should i try to clean and repack the bearings? I have only done 5k on them, so they shouldn't be broken 😅
@joebloodworthАй бұрын
Is there a way to remove dust cover without a proprietary tool?
@CeramicSpeed9 күн бұрын
Hi, Yes, these can be done by hand most often, pulling straight out with your thumb or combination of thumb and fingers. The tool isn’t necessarily proprietary, it just simplifies the process where there is not much room to grab onto.
@eskilityАй бұрын
When setting b tension, should one use the original Shimano gauge or does the OSPW have their own specific clearence?
@CeramicSpeed9 күн бұрын
Hi, The ideal gap is between 4-7mm.
@generalruler2 ай бұрын
why replace a perfectly fine chain?
@user-oz8he6dg5l2 ай бұрын
A dream to drive a bike with this trasmissiom ❤
@yoonstrong2 ай бұрын
형님 감사합니다. 덕분에 설치 완료했습니다 :-)
@Eirikkinserdal2 ай бұрын
Now show us how you remove the bbright without knocking it out 😅
@edt52762 ай бұрын
👍 for great video in spite of using "front" and "back" instead of unambiguous "inboard" and "outboard" which was not helpful.
@SuperVo2max2 ай бұрын
by far the best tested and proven product on the market. I love what you guys do. Thank you.
@deadreckoner5276Ай бұрын
Get off your knees and onto your bike that doesn’t need this.
@ralfpetersen3092 ай бұрын
How do you set the chain length with the ospw rs, a 10-33 cassette and a mono chainring? Same technique?
@jonathanzappala2 ай бұрын
At this point it’s good you made it understated, because I’d be embarrassed to have people know I paid that much for your part.
@charlesmansplaining2 ай бұрын
Asking so much money for something so impractical is beyond crazy. But, there are a lot of dumb people in this World who think it's worth it.
@amfromchАй бұрын
and this "dumbs" buy also Dura-Ace, S-Works, SRAM RED a.s.o. 🤣🤣🤣
@ericl64602 ай бұрын
Better turn the comments off before its too late 😅
@leosportraining2 ай бұрын
How many thousand dollars are they going to ask for this part? 😒
@dexterx552 ай бұрын
its 600 euro and has a weight of 101g...
@leosportraining2 ай бұрын
How many thousand dollars are they going to ask for this part? ..! 😒
@darealpython2 ай бұрын
question, since I'm in the market to get me this cage: I have the XX SL original cage, and it is visibly twisted, the pulley wheels, including the so-called 'magic wheel' are not in the same plane, they follow and guide the chain perfectly, as they should have done for many years. a nice innovation. in your 3D rendering movie, I don't see this twist, and this unboxing is way too fast, it doesn't show the cage from those angles! this is a deal breaker, if your cage doesn't feature the same twist, I will not buy it! please reply fast, I don't want to delay my purchase. thank you!
@CeramicSpeed2 ай бұрын
Hi there, After thouroughly testing the stock SRAM cage, we found that there was lost friction due to "cross chaining" in the cage. And by straightening out the chain in the cage we prevented this loss of friction. I hope this helps.
@darealpython2 ай бұрын
question, since I'm in the market to get me this cage: I have the XX SL original cage, and it is visibly twisted, the pulley wheels, including the so-called 'magic wheel' are not in the same plane, they follow and guide the chain perfectly, as they should have done for many years. a nice innovation. in your 3D rendering movie, I don't see this twist! this is a deal breaker, if your cage doesn't feature the same twist, I will not buy it! please reply fast, I don't want to delay my purchase. thank you!
@darealpython2 ай бұрын
3 months and barely a comment. well, here's my question, since I'm in the market to get me this cage: I have the XX SL original cage, and it is visibly twisted, the pulley wheels, including the so-called 'magic wheel' are not in the same plane, they follow and guide the chain perfectly, as they should have done for many years. a nice innovation. in your 3D rendering movie, I don't see this twist! this is a deal breaker, if your cage doesn't feature the same twist, I will not buy it! please reply fast, I don't want to delay my purchase. thank you!
@jonphotos86313 ай бұрын
Any one know where to get the chain holder at 4:46?
@leosportraining3 ай бұрын
How many hundreds of dollars are they going to ask for that part? 😡
@robertolim9749Ай бұрын
stop being poor then
@cyberx70983 ай бұрын
It would have been good to actually show how to measure the chain to the correct size instead of just making us go search on CeramicSpeed's website for the information. Instructions on the website are not good and is missing what position the OSPW should be in when the chain is cut down to the proper size and connected.
@SuperVo2max3 ай бұрын
wow that's super clean and awesome. I love the solid pulleys and leaner cage design. Great job.
@Acura1NSX3 ай бұрын
All this bling is junk... best to be avoided and use what comes on the derailleur from manufacturer. This is the definition of wasting your money.
@masterblade81763 ай бұрын
Is it on sale?
@s1lent513 ай бұрын
It should go on sale end of March as far as I know. However we should check with our local dealer/bike shop on when they would expect it to arrive as well. I was just about to get one for my bike few weeks ago. However decided to wait and get the latest one since the release date was imminent
@elviracatherinetalaoc20703 ай бұрын
How much is the OSPW for SRAM Red?
@CeramicSpeed3 ай бұрын
You can find pricing and other information right here: ceramicspeed.com/en-eu/products/ospw-rs-for-sram-red-force-ax?_pos=1&_fid=558c5ba35&_ss=c
@edsonrozario72524 ай бұрын
Hi, the durability of this type of hub with ceramic bearings is compromised by cyclists weighing over 100lbs?
@JCGZZG4 ай бұрын
Second to lowest tension hole, OK, what are the other 4 holes for? More and less tension, when will you use more or less?
@toolboxwars6054 ай бұрын
Love the helpful details...❤
@toolboxwars6054 ай бұрын
This video helped a lot. Thanks❤
@ziephk4 ай бұрын
What happened with this project?
@leosportraining4 ай бұрын
And how many hundreds of dollars are they going to charge for this part?…! 😮
@EdgarCarrasco-dz9zo5 ай бұрын
What's the max chainring clearance size? can you use oval chainrings?
@marcosnovalbos23475 ай бұрын
Hi, can I used the bb86 sram for a bottom bracket 92mm? Thanks
@GuyLaurentSuizo5 ай бұрын
I have a BB86 for Shimano Ultegra (mechanical). Is it compatible with SRAM Force AXS BB86?
@ShaheedCreative5 ай бұрын
Amazing engineering!
@EricHSong-wo5gy5 ай бұрын
If I lost the protective film,, Can I replace with any other film for that?
@letishaflanary78605 ай бұрын
'promo sm'
@SabianDB026 ай бұрын
What causes the retention pin not to go in at all ? It is not going in smoothly and very hard. What causes this?
@michaeltucker356 ай бұрын
@ceramicspeed Can i use my 11speed ultegra jockey wheel on 12 speed ultegra??
@alm.59726 ай бұрын
This would cool with coaster hubs
@SUPERTIBERIO6 ай бұрын
How many links do I need to add to the original chain length to use OSPW on my Eagle AXS ?. thanks Jacopo
@tohenny6 ай бұрын
I hava a Time frame with ceramic speed BB386 (Sram DUB). Is there a "non-destructive" way to remove the bracket shell cup? by that I mean, without the need to hit out the bearing-cup with a hammer. I cannot find videos of BB386 where the shell cup is pressed out of the frame instead of into the frame
@AndreasRavnestad6 ай бұрын
Is this satire?
@blinzi696 ай бұрын
is this a BSA 68 bottom bracket? do you use the inner spacers on the bearing? thanks
@leosportraining7 ай бұрын
And how many hundreds of dollars are they going to charge for this work of art? 😅
@jackmorrissey53187 ай бұрын
Hi, When I installed it I’ve noticed that there’s play where the cage bolt screws into the derailleur body. I’ve packed the spring with grease and torqued down the bolt but the play doesn’t go away. Is there a solution?