That means we hv to abandon some button functions? Coz the steering wheel covers some buttons ?

Hi, do you know what or what kind of bolts were used to hold on what you called the shift boot houseing? I want to get some longer ones for a mod a want to do. Any info would be great. Thanks

Alright, the issue I’m seeming to have is that the stock center bolts don’t seem to be long enough to reach the QR? Anybody else having this problem

how much stable it is?

Can I take the electronics out of the quick release and directly mount a 6x70mm wheel to it? If so, do I not have to buy a separate d1 spec quick release?

To Everyone who says this doesnt work.. IT DOES. I bought some random wheel adapter off amazon that looked just like his; followed the video step by step and it works finally. NGL it didnt work at first for me i played with the deep dish wheel for about two weeks without the buttons from the ES wheel, but I had some time to try and look at it again its all about the angle and pos of the piece over the screw holes.. Get that right drop the screws in and ur goldn ponyboy xD. Mainly i had to get this to work for my gf the 6spd H w/ Clutch is too much for her but shes learning LoL. This saved me some money though I was gonna buy the Aftermarket wheel that fits over the buttons or get another adapter piece but its DOABLE

That’s brilliant man!

C'est trop beau. J'aimerai bien des belles pédales comme ça. C'est de l'art. Bravo

For anyone going to do this put a touch of grease/Vaseline on top of the spring to hold the ball bearing in place while reassembling it.

Were I find the adapter

I just ordered my r5 and bigger wheel I know I'm going to need. I had a g920 and hated it. I put a bigger wheel on it but it was just worse. How is the ffb after the bigger wheel?

Do I have to add the buttons or can I just get a custom wheel and an quick release

I actually stopped playing sims cause after buying this one it was so uncofrtable, my butt starts to fall asleep and it just feels like I'm slipping off, a how to video of chaning the seat would be amazing

What’s your wheel settings and asseto corsa settings

Gave it a shot and was definitely worth it.

Excelente gracias por el video me funcionó de maravilla

Install of seat vid ?

If you guys are going to do it, add just 5-6mm of preload, more than that, it is impossible to make it stay in place, you use for a few races and the ball fell from the spring, I was trying with 8mm at first, now I'm usign 6mm and it is perfect

Watched 100s of videos on resin printing and NEVER seen this issue addressed this way. Thank you and kudos!

Anyone struggling to find a piece to fit inside the spring, I spent hours tryna find something with enough decent size - head to give a decent preload, In the end I made one myself by shaving a wooden dowel into the shape and size I needed lol…also for any newer batches from Logitech the cable that you unplug is glued down to the plastic housing and it’s very tricky to free the cable without damaging it, again, be patient, oh and Incase anyone is wondering. It makes a huge difference🔥🔥. #TeamMod#FckkWarrenty

thanks bro this is awsome

Hey man, how’d you fix the wires being pinched? Unfortunately ran into the same problem when I was on forza immediately noticed it didn’t register the gear

Bro why would you upload this. The adapter dosent even work. You wasted my time and money. No wonder you have no subscribers

Thanks a lot!!!. Really easy upgrade to a proper diameter wheel

adapter link or dimensions to 3d print?

I have a question, can you just install the wheel and skip the whole button box? Do you just control stuff with keyboard then or will there be conflicts inside the game? And also, if I do buy the QR from moza, will the button box not get in the way for most third party wheels? I mean it's nice with the buttons but it seems like the wheel need to be perfect for it to not cover over buttons or what do you think? Nice video, very interesting and I learnt a lot. I'm about to buy my first rig and weighing back and forth between R5 bundle (with not great pedals) to R9 and mixing and matching stuff myself. What is your opinion on R5, is it enough power or will I get bored of it fast in your opinion? Thanks for your help.

What game is this?

do fanatec wheel also work on the moza base? or just the other way around

do you have the default settings? or a backup i really need it

This is cool I think I will definitely do this when my stuff arrives

"This is a game changing mod" 👏

I just did this mod after your vid, I use the H-Pattern tactile mod, and the inner ring with rubber bands, as well as a taller, yet lighter shift knob. Feels twice as good to use now. But I didnt think I needed the headbolt/spring mod, and basically wasted my time by taking it apart. But now I've just done it, and it really compliments the H Pattern mod well. I made a 5.4mm wide by 5mm tall cylinder on my 3d printer. Actually a half decent shifter now

How to install and use mods in ps4 ?

Good video and nice mods. I have used a lego connector peg filed to 5mm. It's perfect!

Can you screw a omp wheel directly to the quick release with the adapter, but without the pedal shifters and like the plastic thing with the buttons on?

You got IG I’ll send you a pic

Ratchet strap bro from the bar that holds the steering base plate to the bottom

Sooo… Basically it’s DIY Difficulty rating would be right about on par with assembling your first AR15 stripped Lower Receiver, Lower parts kit, and Trigger Group assembly. Lol, Ya mostly need to just know exactly where and when to look out for possible flying springs and/or spring detents. Then, it’s a piece of cake! 🤣, 👊!!

Que juego es ese . Si es azetto corsa como hizo para jugar en la ciudad o donde consigue los mod

After going through this fun endeavor a total of three times, I learned the hard way how critical the amount of preload you add to that spring is. First I added an SAE #4 socket head screw. The screw head added about 2 mm of preload. Made a difference but not enough. Then I added a 4.5 mm (or 4 mm, can't remember) ball bearing underneath that screw for a total preload of about 6 or 6.5 mm. Made it ridiculously notchy to the point of not even being useable. So I removed the screw and left just the ball bearing in. Near perfection but if I could do it again (which I won't!) 5 mm of additional preload under the spring would likely be perfect

What is the depth size of ur streering wheel

How do you use the htc vive to play VR on Assetto Corsa? I cannot seem to connect my headset to play Assetto Corsa in VR

What Tim are you running on the m5 wheelbase??(Trying to figure out if I can use a real drift wheel and not just a sim based one?)

I think you just unknowingly helped me out by convincing me to buy a quick release adaptor instead of any Moza steering wheel. I'm shopping for my future setup and so far it's seems like I'm going for a Moza R9 base, quick release adaptor and the handbrake (maybe), a Fanatec h-shifter and Sim Jack pro pedals if I can't find anything else more interesting to me or the price range I'm willing to spend. Instead of a Moza steering wheel or custom steering wheel plate, I'll buy the necessary things to make a custom button box attached to the h-shifter and tinker turn signal and wiper levers to probably have more fonctions then needed for any driving/racing games I want to play. Big thanks man!!!!

Installed mine thanks for the tutorial. Works amazing

Knowing there's a good chance the ball bearing will fly across the the room, does anyone know the size so I can have a spare ready?

Gotta grease her up tho 9:17

pedal mod is worth it if u plan to keep the rig, i swapped out the clutch spring with a $7 variable spring and swapped gas spring with the stock clutch spring. won't give u faster lap times, but makes feathering the gas alil more real. thanks 4 this vid

For those who wants to try this mod, do it! But make sure to add some grease near the ball bearing for smoother movement and less "clacking" sound.

how many mm is the adapter?