i was just about to click on pay now before I thought i should check for any reviews. So thanks Zombie Operator for saving me $180.
@craigcumberland374020 күн бұрын
NSW legal ?
@ZombieOperatorAUS20 күн бұрын
From my understanding, it is legal. However, if you put an adjustable or folding stock into that, then you're shit out of luck.
@craigcumberland374019 күн бұрын
What about a none folding or adjustable stock , do you have them ?
@mickhood483122 күн бұрын
Awesome looking forward to this,been looking for something just like this🫡
@mickhood483123 күн бұрын
What foregrip is on the shotgun in this video?
@mickhood483123 күн бұрын
How do I contact for ordering please
@skunksmirch7185Ай бұрын
Why didn't you connect it to the screw driver and try to record then. There definitely no one could see anything. Ok? That was your goal? Right?
@edwardmorrison2461Ай бұрын
Nice one. I just picked up a 2023 model a few weeks ago and was planning on having a look at the tank to figure out why it won't fill properly. This should make my job a lot easier. 👍
@seansvlog7079Ай бұрын
May I ask when u drill to make the bracket will it leak air from there
@ZombieOperatorAUSАй бұрын
No, not unless you continue drilling into the tube.
@seansvlog7079Ай бұрын
@ZombieOperatorAUS ahh, so meaning once it goes in I need to stop right, I never done it so just to make sure
@ZombieOperatorAUSАй бұрын
@@seansvlog7079 Yes, ensure you have stopped. Have a search on who the intercoolers are made, you will see that its finned tubes under the tops and only the end caps are solid.
@seansvlog7079Ай бұрын
Okay bro thank you for guiding me🙏
@sputnik5991Ай бұрын
Hi there. I am looking at doing the exact same SM conversion with the Aussie E 2023 model. Could you please provide a list of changes/ parts you had to buy to make it all work? Seems like most of the info out there is for the U.S or elsewhere but not the Australian E variant. Cheers.
@ZombieOperatorAUSАй бұрын
Its simple. Motard rims that suit and a motard speedo drive from suzuki. Since they run a 14T front, youll need a different rear sprocket. 43T if you like to party, 41T if you like up and go but dont mind high revs at 100km/h. Im running a 39T due to riding more highway than city. If you plan to swap between dirt and road rims, then some brake rotors and chain will be needed too.
@sputnik5991Ай бұрын
@@ZombieOperatorAUS thanks for the response. Did you need any additional spacers or relocation brackets for the brakes?
@ZombieOperatorAUSАй бұрын
@@sputnik5991 Running e model front brake. So no spacers, if you want to run larger front brake, youll need extra bits.
@dazza88842 ай бұрын
Thanks for saving me the pain of buying these. Good job.
@moturcu42262 ай бұрын
Excellent video mate thank you.
@iam63457892 ай бұрын
Great upgrades. Do they make those mag connectors for 22wmr. I've just purchased my Ruger in 22wmr and love it
@ZombieOperatorAUS2 ай бұрын
I dont have a 22WMR so i have been unable to make one for them.
@iam63457892 ай бұрын
@@ZombieOperatorAUS Thanks for the reply! I may do some looking around as I need at least 1 more magazine. We shoot alot of 22lr. Good cheap fun. That 22wmr is a nasty bullet. Thanks for the video!
@andyabik2 ай бұрын
Mate - cheers for making this video!! I have a 2024 model in NZ and filling it with gas has been doing my head in.. Every time I fill it, it overflows when it is clearly only half full.. I would then have to creep in the remaining 5 litres in and it was taking me 5 minutes to gas up. Finally sat down to look at it and found your video - what a monstrosity haha. Thanks again, on my way downstairs to rip that thing out.
@ajiyra11882 ай бұрын
Thanks for the review
@arkana4wd7273 ай бұрын
Thankz for vid mate: Just my 2 bobs worth. I`ve used a couple of sets of BCP brake drum and disc rotors on landcruisers and never had any issues ``But`` i`ve always been reluctant to use slotted & dimple & never have.They maybe OK for bitch sealled roads but in mud & dirt i think they collect the shit. A remedy for Disaster.Bendix blue strip & flat discs in my view.
@arkana4wd7272 ай бұрын
Up date on BCP rotors received from Sparezone Ebay... They gave me apparent TRW instead. These things are some universal fit with 16 holes in the creaters.There is no significant structual strenght for extream 4x4 driving.Seems like all of Ebay stuff now is flooded with Chinese inferior crap & their so proud of their products they won`t even put their origin place of manufacturing. It really is a Nightmare now trying to evaluate which good aftermarket ones to get. Boch maybe ? cheers.....
@ricardocunha4593 ай бұрын
Thanks mate👍
@mvanvn3 ай бұрын
Dodgy branding technique. I am looking into this brand off ebay to replace my pads. Better stick with the old boys then. Thanks for the vid
@aircommando5053 ай бұрын
Love that on my Tikka T1x.
@PaulHermann-nj6re3 ай бұрын
Outstanding. Putting a tonneau cover/canopy on, and now I can lock it up. Thank you.
@huntermetrejean2323 ай бұрын
Awesome idea
@FFSmyuzer4 ай бұрын
Hey mate would you have a link to the gauge? I couldn't seem to find the one you'd have.
@ZombieOperatorAUS4 ай бұрын
It was custom made. Modding a SAAS dual gauge to fit in a custom piece. I may end up designing something anyone can build, but at this stage, nothing is available.
@georgespoirier4814 ай бұрын
I have an SM model, is the frame the same between an E and S/SM i’d like to put a plastic fuel tank from an E on the SM
@ZombieOperatorAUS4 ай бұрын
I have no idea. I suspect they would be the same. As far as im aware, frame wise, between the E and SM are that the sub frames are different.
@1Roemac4 ай бұрын
Thanks for the video. I was looking into who BCP are and came across it. Think i'll stick with DBA. Cheers.
@jacobyoak4904 ай бұрын
How did the last over the year you’ve been using it?
@ZombieOperatorAUS4 ай бұрын
Still going strong.
@karenknight24114 ай бұрын
Can I get a pair
@liviomoraru4 ай бұрын
At least you are honest acknowledging that " Telltonica RUTX09 has been sent back due to power loss firmware bug " ...
@MattyK1665 ай бұрын
Awesome mate. Was warned also.
@damnyiffers5 ай бұрын
I have the addler b230 (same gun just mag fed) and my single complaint is the pull lever is just too small. Any more then five shots and your finger is killing.
@jimdent3515 ай бұрын
I regret buying my American Rimfire. The center line of the magazine does not line up with the center line of the chamber so consequently the ammunition gets hung-up when the nose of the bullets hit the left side of the chamber. Ruger refuses to fix it. Garbage company!
@ianallard54534 ай бұрын
They usually do, if you still have all your paperwork they will likely give you a new one but I think they have a limited coverage time, so check fast!
@jimdent3514 ай бұрын
@@ianallard5453 The thing is that I owned it for 10 years before shooting it. It was still in brand new condition, and Ruger's repair facility said to send it to them and Ruger would cover the repairs but not the shipping. In other words, I made sure they knew I had it for nearly 10 years. A month after they received it they emailed me with the diagnoses that the stock's mold was off a bit and the magazine was off center, BUT Ruger was refusing to to fix it. So they admit that it was defective but I was on my own for the repairs. Total cost for the repair, including the shipping, will be around $280 plus taxes. If they had been honest with me in the beginning I would have never shipped it to them. Once it was in the mail I was screwed. I still blame Ruger for this. They knew that some were defective, and It was their contracted repair facility that said it was covered. The even worse part about his is I have 2 10/22s in my safe that are several years old that I bought for my sons the year they were born. There will be no more Rugers entering this house again. In fact, I'm considering selling the 10/22s and buying something else.
@freedom2igniteАй бұрын
Same issue. Bought the rifle when my son was born and obviously he couldnt shoot it for a while. Dealing with the same issue and it’s past the time where they will fix it
@markstrahlendorf77385 ай бұрын
Very nice mount. Just what I need for my 17hmr
@thrillbily6 ай бұрын
Xhunter are horrible I won’t buy from them ever again
@Paul-zp3ks6 ай бұрын
Can't find it
@12kabubi6 ай бұрын
Hey Zombie thanks for the Vid, and due respect for your tenacity. I'd like your opinion on whether or not you think a new buyer of this bike should flush dust and other manufacturing debris from the fuel tank as soon as they get their new bike home. So I guess I'm asking do you think some of the gunk in the tank may have been from dirty factory practices? Cheers
@ZombieOperatorAUS6 ай бұрын
Bloody oath. Not to mention your oil filter screens (multiple) as soon as possible, the amount of silicon in mine at first service was a joke. Im still going to say, worst KTM ever made. Im back on a DRZ now.
@nickmaxwell1936 ай бұрын
Hi mate, i cant find the stock adaptor on your web site, do you have a direct link to purchase this ? Thanks
@ZombieOperatorAUS6 ай бұрын
Currently not producing these I am looking to modify the mount some more in order to make installation simpler.
@nickmaxwell1936 ай бұрын
@@ZombieOperatorAUS thank you for letting me know, get in contact as soon as your producing the new version, thank you
@kivenkantania6 ай бұрын
Does it have glass or polycarbonate?
@kivenkantania6 ай бұрын
Similar to Nextool?
@leonpreston99386 ай бұрын
Awesome video. Any idea if the ktm 390 adventure and the 390 duke share the same pump?
@georgeparsons73386 ай бұрын
I love the mag release. I think it was my 10/22 where I hit the mag release and pinched my finger and it bled like a stuck hog. Blood all over the gun and my clothes
@yalieangami62336 ай бұрын
Aiwaa 💕👍
@chrisdangelo52066 ай бұрын
How did you mount the additional pic rail for the magpul grip?
@ZombieOperatorAUS6 ай бұрын
Mounted straight to the stock with screw. I do have a couple of rail and grip kits available still.
@chrisdangelo52066 ай бұрын
@@ZombieOperatorAUS what size screws as the guard is super thin and there's not much clearance?
@johnaustin70146 ай бұрын
love them beautiful cuffs
@paullewis2527 ай бұрын
A useful video. I am planning to fit one to a Kona also, so your experience has been very helpful. I don't like modern cars for the exact reasons you experienced. My own car is an 80 series and fitting bits is really easy. Anyway, thanks for the video.
@ghostedyoutuber2637 ай бұрын
stop talking up at the end of your sentences... annoying AF
@burkeyistheone7 ай бұрын
I like your mag release. Looks grow on you.
@kevninnes14377 ай бұрын
Thanks for the info just about to order and they were trying to give me some other junk brake pads
@johnisabeth25047 ай бұрын
I have a howa mini 6.5 grendal. Looked at these stocks. They have got bad reviews. So I have shied away.
@smokinez7 ай бұрын
Curious as to where you found reviews on the excl stock, I can’t find any? I’m specifically searching for reviews of the excl on the howa mini.
@johnisabeth25046 ай бұрын
@smokinez found the reviews after searching for excl lite reviews. Comes up with a few gun forums. Found a few positive ones lately. I live in NZ and they are quite common here.
@Right_Hand_Watch7 ай бұрын
The cover is to use it during light without damaging the sensor
@holden30838 ай бұрын
👍. Cheers for the vid. How’s the pump going? Where did u get the bike worked on? Where they left the plastics undone please? Do u still have the bike?
@ZombieOperatorAUS8 ай бұрын
I dont own the bike anymore, I sold it shortly after. Was not happy with that bike at all. A dealer in Maryborough.
@dancedad50948 ай бұрын
That mag release is a joke! I can see it snagging on a branch or your coat and losing the mag. Worse yet when racking in another round with a gloved hand and reaching foreword to reestablish your grip, merely touching the lever will drop your mag to the ground when trying to fire a second shot. Save your money.
@ZombieOperatorAUS8 ай бұрын
So.. You have one and experienced this? Or just blowing smoke out your arse?
@dancedad50948 ай бұрын
@@ZombieOperatorAUS 54 years of whitetail hunting and common sense tells me this, Mate.
@ZombieOperatorAUS8 ай бұрын
So no, you have not used one.
@NelsonZAPTM7 ай бұрын
@ZombieOperatorAUS it is a genuine concern, I've lost mags with the standard mag release.