I think it’s the hydraulic valve lifters that makes that sound , you foten get that sound with low oil level / pressure or when they are broken. That’s my guess anyways.
@rob61542 ай бұрын
It's beautiful man, I love the sound 😍 it is ferocious 🤩🤩
@tosijjaan3 ай бұрын
When you hear a PONSSE buffalo coming down the road but it's just a Mercedes
@axios763 ай бұрын
You gonna wanna
@devinromberger87464 ай бұрын
How in the hell did you get a socket onto it? It’s way too tight in there
@kevinniemeyer33655 ай бұрын
Badass love it
@PickedOff1005 ай бұрын
I've looked everywhere I can't find me no Whizz wheel, just what is a damn whizz wheel?
@johnM-Jr7 ай бұрын
Great, what brand/supplier did you use for your bumper and how is it holding up ?
@eternalbeing333910 ай бұрын
What about the other 2 lines going to the heater? Can i plug them?
@jimkillen106510 ай бұрын
I think that the Cummins oil pressure sensor is just a normal open switch that closes at a fairley low psi . I dont remember exactly how much . The rest is just a manufacturer number from the ecm . I think Mazda does this also . I added a manual gauge to me truck and left the factory sensor in the circuit. Sure enough there are different psi at both gauges .
@bradmbz Жыл бұрын
Is it noticeably louder while driving?
@thelagmeister Жыл бұрын
Nice truck. I got the 5 speed 3500.
@mikedabike64ify Жыл бұрын
Important but stupid question. Sorry I assume that the drain is Lefty Loosey dumb question but I don't want to break that. plastic. Meaning I would turn the petcock to the left to start the drain thank you so much
@mikedabike64ify Жыл бұрын
Thank you
@ferhatabdelkoui3169 Жыл бұрын
Ton moteur fait des claquements, comme mon moteur je suis a la recherche d'où sa vient le bruit mais je crois que c'est les prechambre tu crois pas?? as tu changé tout les injecteurs ??
@shownee1 Жыл бұрын
I did the same thing but I painted everything with primer and with hardener in the paint. black.
@rosssmith9941 Жыл бұрын
It's still nailing dude lol
@JohnFFay-rn8do Жыл бұрын
Thats exactly what i have to do 93 turbo diesel. Thank you
@kittykatskittens Жыл бұрын
swit swoo
@hogan667 Жыл бұрын
Thanks a lot mate! My 190D (1989) is leaking & I was unable to find information in any german forum how to bypass the fuel heater. Hope that this fixes the problem.
@DominosDiesels Жыл бұрын
Glad it helped!
@clintcarter8708 Жыл бұрын
Some people would complain about being hung with a new rope. Jeezuz, people, you act like you paid for the video or something.
@jurgenhenn6288 Жыл бұрын
Thanks! That's exactly what I needed to know. My '92 has an air leak and that heater is prob the culprit.
@DominosDiesels Жыл бұрын
Glad to help!
@mangravy2000 Жыл бұрын
What camera are you using? My borescope doesn't look like that. Can this sensor leak a lot of oil? The cable coming off the sensor is dripping oil and all wet with oil.
@DominosDiesels Жыл бұрын
Just my iPhone! Yes it can, my brother just changed his and it stopped an oil leak.
@TheTrinityskater Жыл бұрын
You didn’t bleed the air out
@monahumada753514 күн бұрын
Hey whats up, I'm about to do this. How do I know I need to bleed my truck and how do I do that?
@stevenmark8156 Жыл бұрын
How did you get that socket to clear the PS pump housing?
@alanOHALAN Жыл бұрын
so the original pipe was 2.5"?
@DominosDiesels Жыл бұрын
Yes it was. I put it back on because we couldn’t hear anything while driving it.
@alanOHALAN Жыл бұрын
@@DominosDiesels I have a 95 300D, but the pipe seemed to be 2" when I measured it. Did you measure it?
@elijahhall671 Жыл бұрын
man im hoping this is my problem, similar milage and my pressure is higher but jumps around at when stopping, drops at idle, but comes back up. and is great when under load. fingers crossed this is the fix!!
@DominosDiesels Жыл бұрын
Good luck! Thanks for watching
@_valve9 ай бұрын
Is that what it was?
@rank1154 Жыл бұрын
I wish to inhale all this smoke
@Bob-gn8ph Жыл бұрын
Thanks
@Bimmerstyle2 жыл бұрын
hello my friend just i need ask about w115d mercedes same system of injector (it s like half part of injector like your ) if i want put new injector how can i do ? because i find for 80 e bosch new it s look like nozzle of injector ... did i need machine for install new nozzle or i can do mannually?? thank for your help
@DominosDiesels Жыл бұрын
You will need the machine for the pop test but the assembly you do not. Best of luck
@rank11542 жыл бұрын
Absolutely love to smell diesel cold start smokes!!
@JHZR22 жыл бұрын
Get the correct hazet socket, don’t ruin injectors by bending them.
@rumbletumblestumble2 жыл бұрын
frame WTF!!!!!
@liamthemarchingbandguy40632 жыл бұрын
It sounds like a Cummins honestly
@jax_light2 жыл бұрын
lil tip, use a plastic bag and lay your phone on the ground under the exhaust tip for filming
@geoffreyfernandez2362 жыл бұрын
That sucked
@craigdefelice76862 жыл бұрын
Did the turbo spool sound off like that before u straight piped it
@redwolfpiping57012 жыл бұрын
What about the hood ornament on a w123, same way?
@timgall86332 жыл бұрын
Why the cummins sticker? Haha 😄
@DominosDiesels2 жыл бұрын
Just to confuse people lol
@harleysquirt47742 жыл бұрын
Hi! For the fuel filter?
@b5zerker6362 жыл бұрын
5cyl right
@DominosDiesels2 жыл бұрын
Yes
@Yasin5791-d7u2 жыл бұрын
Pls put a 10 blade turbo.
@ericmartinez40532 жыл бұрын
I had two Z50's when I was a kid, and lived in a rural area. It was like owning a ticket to freedom. I'm wanting to buy one for my kid and thought they would be cheap. Man, was I wrong. People want insane prices for them now.
@DominosDiesels2 жыл бұрын
They sure are fun… Yes, I can’t believe how much people are selling them for now. Most people want more money than they cost brand new.
@hameedsrt90952 жыл бұрын
Hey Man U said u changed the prefilter for the small red one or what was it called the exact name
@DominosDiesels2 жыл бұрын
www.pelicanparts.com/More_Info/0014776601.htm?pn=001-477-66-01-M45 I found this Pre filter online for sale if this is what you are referring to. It’s pretty much the exact thing that I have on my Mercedes.
@user-uz1iv9zx7p2 жыл бұрын
Hello
@user-uz1iv9zx7p2 жыл бұрын
Hello
@bearsgarage2722 жыл бұрын
I thought mine looked odd with the big gap between the bumper and tailgate butn i guess thats how they are
@JoeHeine2 жыл бұрын
I have this exact car. 1991 E300D 2.5 Turbo. Mine needs new bumpers and body work.
@maxbollinger61582 жыл бұрын
pretty sure theres a bleed screw on the head, how do you know you don't have air trapped in the system?
@enjoythesho19922 жыл бұрын
The z50s are built better in my opinion and look better also