I've one of these radios which my Dad and I bought used in 1985, don't use it day to day but occasionally dig it out and power it up, main issue I've had is the microphone cable going sticky but fortunately had an identical one off a similar vintage Trio that was scrapped. Good luck getting this one working 👍

Thank you so much. Good job 👍🏻

Ok thanx. Just wana to say big up on sharing this video coz I had the exact same nightmare getting to the "interface connected" step. Now I just need to take the time to have everything running without interruption and studying all the modules. Ultimately I need to do an Eeprom as I recently changed the lockset on the car(mk2 megane). Anyways once again thanx for the detailed video. If you have any on BCM/UCH programming please share.

i want to program BCM which module do i use?

Nice to see a TR-9000. I have a TR-9130, and it has that common problem of intermittent connections in all those multipin connectors behind the switch board. You can definitely do more of these videos, as far as I am concerned. Tks de ZS1DFR

Bonjour, comment faire pour ajouter les codes des nouveaux injecteur sur Renault Scenic 3 ? Merci chef

My experience with technical manuals was the same but in a different field. They are clearly written by people who know exactly what they are writing about & it appears obvious to them. They seem to never look at what they have written and think can these instructions be interpreted incorrectly. It caused me some headaches I can tell you. Nice to see a fellow Yorkshire man helping others.

0:44 HAM radio, what is that? when I was growing up, in the 80s. we called is CB radio, I could google it, but, as you put out a video, i was hoping you woul tell us what it is for us (me included), sorry to be that person, but HAM? thats a meat in a butty. also first

I just bought a CR4-E and found it has a take up reel problem….so I hopefully this video helps me!

the Japanese word for fly is tobe (pronounced Toby).

Question... Why do the eject to write TOC and then re-insert the disc? Can't you just do everything you have to do on that disc then eject it? I've seen several people complete a single operation, then eject to write the TOC. That just seems like a lot of unnecessary wear on the loading mechanism. Thanks!

Can you show me how to tape it? I'm having trouble recording. Press the record light to turn off

Brother. What is your name ? Are you from U. K

I have an Nakamichi BX100 which is 1986 and has EX (1) SX(2) and ZX (4) markings 😊

Good to see what to check on some decks. I fixed a Denon CD/Cassette deck recently and continuing working on a Sony TC-177SD. All fun to work on. I should keep away from cassette walkmans though!

Bro if i borned in our country. I was your student. I love these machines alot

Hi, love your patience. As a Senior who has tried all this as a hobby, I would have consigned this deck to the bin a loooong time back. Question: what oil (in the syringe?) and grease do you use? I would love to know. Keep up the good work. Cheers

Philips turns simple mechanisms into disaster one. Its too hard for the mechanics to fix philips sets. Wether is deck or an radio set. In our country ( India) . Simply ignores to fix or repair any philips systems.

Wow. You are s good technician who do job with love and patience

nothing new! will you shout it?😅

Watching this video has made me realise that not everyone is stupid about cleaning vinyl records... I've been using the Retro/ Music Spin Cleaner for the last 3 years but will say that you can get away with cleaning the vinyl records anyway you feel comfortable as long as you don't press to hard just like you are doing .

Hi Sir I am a watch mechanic in Sri Lanka and I am waiting for your help. Can you please help me?

kzfaq.info/get/bejne/iLOTgpqQ0J2amnU.htmlsi=wXl-iTYly9oDmsAH

You sir are not chatting rubbish. You are spewing gold. Your video is a treasure trove for us newbies. Maybe I'll get this tape deck to work after all. thank you so much!

Help my yamaha deck not reconize normal tape only metal tape how i fix this problem

Hi, thank you for the explanation. These decks are sometimes tricky. I've changed the belts on my tc-k500 S, I have to take out the transport out a few times because it won't play properly, the grey cam gear😂 now it works nice but the Dolby section is completly not working. I've used contact spray on the switch and checked all connections. Do you have any tips? Cheers

It's actually my deck - great job Paul!! I also have a Sony 661s which Paul sorted out - again great work. I've some cassettes from back in the day that I very occasionally play, and I can now do tape to tape with the Nak being the playback deck. I doubt tapes will come back like vinyl has but if (like me) you want to record something from vinyl or another source, a good cassette deck can have its place. Getting a good vintage one serviced like this gets you a better machine than a new one (without dolby etc).

Did you try to run it on windows 10 using windows 7 compatibility mode? And THANK YOU for a very informative video 👍

Fantastic video dude.

I should have give you my Aiwa xls 7000 to service ! - great video

I've just watched a future video where you repair a 450 variant of this. It would be interesting to hear and see if there was a difference between the two. As there's a separate drive motor for the flywheel; if the heads are different and or electronics.

How did you trim that shaft without bending it?

good job ! where are you sourcing your mabuchi motors from if i may ask ?

Hey still lovin the content, had another question tho...where do you get your pinch rollers from?? I forgot what video it was but I remember you said you got them in bulk.

Very nice , I have 2 Sony Walkman's and a Kenwood hifi deck from early 70's. Bought new and now for sale USD $ 1000.

Worked at a electronics module factory before. For cleaning copper traces/pads, we used to use pencil plastic erasers and does the job nicely without affecting PCB masks or scratching the pads.

Another thank you for this great video. My KE200 had also stopped working as both belts had disintegrated to an oily mess. I followed the instructions you provided and got into the unit and spent at least 1.5 hours cleaning the oily gunk out (truly a messy process - I used most of pack of cotton buds and a third of a botte of IPA). Got a replcement belt and roller kit from Ebay (£11) which included a new spindle for the roller and fitted them as shown in this video. Fired it up and was extremely pleased to have my cassette desk workng again.

Very good

if i may ask for the specs of the labtop you used in this vedio info about the processor and the ram thanks🌹

I GOT ONE FOR 5 BOX WORKING .

Quick answer to your video title quetion : Because it's broken ...hmm said it .

Had my Nakamichi Cassette Deck 2 from new and it's still going strong handy thing is they can be picked up for a good price these days as most people want the more high-end decks also bought a DR-3 about a year ago which i think is the same deck just with a different fascia for £60 and it's in mint condition

Messing around with cassette decks in 2024 is laughable!! 😆 I gave up the format in 2001, absolute trash nowadays 🗑️

Happy days good outcome

Great job as usual 👍What is the source for that motor?

Great video and very helpful. Thank you.

Hi have a look at Nic and Andrea Hills they have a tool box full of electricals ideal for you and fixing players

Knackered-Michi

Another great job, well done Paul

I have the same deck, although in silver, and really like it. What causes these motors to flat spot, and is there any way to avoid it?