Пікірлер
@byronrich2780
@byronrich2780 Ай бұрын
Came here for the c-shaped stopper. Mine blew off while riding. Thanks for showing me what it looks like
@MrPataChannel
@MrPataChannel Ай бұрын
Thank you , i Just break mine Yesterday night
@arcanatcg9866
@arcanatcg9866 4 ай бұрын
hey I need some advice, I as of tonight followed the steps of this video and changed the gear lever of a 2016 ninja 300 and before I did the bike couldn't find neutral but i could shift to 1st and onwards. (the bike had a stationary drop and that was why the gear lever was being replaced. after replacing the part the bike can only find 1st gear and neutral. what have I done wrong?
@arabmotorcycle8633
@arabmotorcycle8633 4 ай бұрын
Hi, try to adjust the pin that is screwed from both sides. Keep adjusting back and forth until you find the right point
@raen1781
@raen1781 5 ай бұрын
Thanks man needed this 🙏 🙌
@5ksubswithonevideo866
@5ksubswithonevideo866 5 ай бұрын
1 have a stretched z×10r 2005, I was out back riding with buddies and we came along an unexpected sharp turn with no caution signs indicating to us. And we all overshot the turn. But since my bike is stretched things were different, I landed in the left lane (no cars nearby) but there was a construction sign hanging off the side of the road of the left lane and my foot connected with it tearing my top foot muscles meaning I can't shift at them moment, my left foot peg was ripped off and my shifter is bent. Still works but I gotta replace it
@spekeridope4532
@spekeridope4532 10 ай бұрын
is this 1 up 6 down?
@imranbashir2471
@imranbashir2471 10 ай бұрын
Thank you so much! I don't have a Suzuki but I do have a Kawasaki and this video Definitely saved me from having to hire a mechanic!
@EvilSapphireR
@EvilSapphireR 11 ай бұрын
I cannot remove the gear shifter connector. It is sitting too tight on the gear shaft grooves. What to do?
@alexandrebravo4472
@alexandrebravo4472 Жыл бұрын
cool video. I dropped my vstrom like an idiot and it ruined the blinker (not sure why they're not shorter than the handlebars. makes no sense to me) so it's reassuring to see that's not a very hard job. thank you for the confidence boost
@GSX_MOTO
@GSX_MOTO Жыл бұрын
Where did you buy a new one
@WILDARMS_TV
@WILDARMS_TV Жыл бұрын
How do I take off the C stopper!?!?
@yBlackSteve
@yBlackSteve Жыл бұрын
Had my 05 sv650 come off while on the road, coasted home in first to find your video. Thanks
@breskanu
@breskanu Жыл бұрын
Just changed the turn signals on my SV1000S - exactly the same. Thank you!
@onanysundrymule3144
@onanysundrymule3144 Жыл бұрын
Good work Sir.
@ScopedKilz
@ScopedKilz 2 жыл бұрын
If you're watching this I'm sorry that you went down. It really does suck. But I'm glad that you're in good enough shape that you're looking to fix your bike back up.
@muhabkasiri6931
@muhabkasiri6931 Жыл бұрын
Appreciate it👍, kinda went sliding at 120 mph on my r6 somehow the frame sliders saved my whole bike and gear saved me. But that lever is completely bend!
@manbiteslife3110
@manbiteslife3110 Жыл бұрын
Thanks mate, nice perspective. I fell with my bike doing 0kmph .
@GarlicPizzaCrust
@GarlicPizzaCrust Жыл бұрын
Thanks foo
@ifyouonlyknew34
@ifyouonlyknew34 Жыл бұрын
Thank you.
@hunterdlg32
@hunterdlg32 Жыл бұрын
@@flemingmacklain2996I lowsided my 2024 zx6r and it broke the gear shifter
@markiewilliamsonlinecourses
@markiewilliamsonlinecourses 2 жыл бұрын
Just changed mine on my Suzuki SV650. Looks like the exact same shifter as mine. Smooth sailing . But that goofy ring is hard as hell to take off‼️ I never knew it was that easy to replace the shifter coming from someone who goes to my older brother for Biker advice . Thanks‼️
@bossman215x
@bossman215x 2 жыл бұрын
Where did you get this from? I need one
@ptavares021
@ptavares021 2 жыл бұрын
What year is that 650?
@arabmotorcycle8633
@arabmotorcycle8633 2 жыл бұрын
2006
@dvrk8887
@dvrk8887 2 жыл бұрын
Thank you bro I didn’t have the tool for the snap ring so I had to use wrench to get it back on
@hanlonrobert5267
@hanlonrobert5267 2 жыл бұрын
Thanks so much will this work on my gsf1250s bandit?
@c_wonder
@c_wonder 2 жыл бұрын
thank you so much. Looking to buy one and saw this piece needed to be replaced so I’m going to haggle the person down some for a simple job.
@shortshighlights88
@shortshighlights88 2 жыл бұрын
Can u please twll me where did u buy the replacement part. Thank you. Im struggling to find one
@devoonbmx603
@devoonbmx603 3 жыл бұрын
🔥
@devoonbmx603
@devoonbmx603 3 жыл бұрын
Good vid thanks bud
@tbnjay3847
@tbnjay3847 3 жыл бұрын
The part at the end that’s connected to the engine is what broke for me idk what the fuck to do
@s__6292
@s__6292 Жыл бұрын
did you fix it?
@djshark211
@djshark211 3 жыл бұрын
I have the 1st gen. The shifter and peg are connected. I’m noticing that the shifter sits lower than the original, I’ve tried to adjust it but I bent the rod.
@_kpke3_352
@_kpke3_352 3 жыл бұрын
Eher did You buy the Body Kit around de Engine?
@adventureswithwolf2836
@adventureswithwolf2836 3 жыл бұрын
extremely helpful thank you. i just bought my first gxsr1000 yesterday and i needed to learn how to replace this. again thank you!
@bronichiwa984
@bronichiwa984 3 жыл бұрын
Do you have any idea what size the washer and snap ring are? Mine busted when I low sided, and the lever snapped + those piece went with it. Couldn't find them.
@beyondroutinefitness-reach9906
@beyondroutinefitness-reach9906 3 жыл бұрын
Hey. Do you know if the middle Rod needs to be adjusted to a certain point? I tightened it all the way in and my bike only goes into first gear. No other gear. Should I loosen the rod just enough for it to hold as you said? Is that my issue? Thanks
@tgdb4968
@tgdb4968 3 жыл бұрын
Thanks man, I need to do this on my SV650.
@Jeff-sp4sk
@Jeff-sp4sk 3 жыл бұрын
Thank you very much mate, thanks to your video i have been able to do the same job on mine !!
@rhys2528
@rhys2528 3 жыл бұрын
what is this type of shifter called?
@Supercarlsunday
@Supercarlsunday 3 жыл бұрын
I welded a new end on mine, have a look in my channel. Very interesting. Its still going strong! Handy having a tig welder on standby..
@MeyerBen27
@MeyerBen27 3 жыл бұрын
This was very helpful, I have a 2009 SFV650 and I think this will work the same.
@shizukodream
@shizukodream 3 жыл бұрын
Thank you that what I needed
@ibrajimenez2098
@ibrajimenez2098 3 жыл бұрын
Hello tha ks for your video. I recently purchased the part but it didn't fit. Which model is your sv 650? Thank you so much!
@texicon
@texicon 3 жыл бұрын
Link to the replacement gear lever! Thanks for the video!
@arabmotorcycle8633
@arabmotorcycle8633 3 жыл бұрын
www.motorcyclespareparts.eu/en/suzuki-parts/motorcycles?gclid=Cj0KCQjw-af6BRC5ARIsAALPIlXfzoIc5MY9r0WFQ1Cy-FtaqT0RPSB9cuDbyeiONb6Aii4vaSewgRsaAhaAEALw_wcB
@jackanthonypayne9144
@jackanthonypayne9144 3 жыл бұрын
Hi mate you know those black rubber things on the shifter are the ment to move as mine has loads of play and doesn’t down shift very well
@arabmotorcycle8633
@arabmotorcycle8633 3 жыл бұрын
Hi, No it shouldn’t mate. The original part is fixed and it doesn’t move at all and the new one i put on it moves inward towards the foot peg. It has a hard spring that moves only if you place a strong pressure on it, otherwise it doesn’t move
@user-op1jm2or1c
@user-op1jm2or1c 3 жыл бұрын
مشكور اخوي
@roadglide
@roadglide 4 жыл бұрын
For many years..Shoei and Arai has been the best in the world bar none. Quality, Fit and finish. The best. Great choice.
@kwizzlerz
@kwizzlerz 4 жыл бұрын
where did you purchase the frame sliders and lower fairings?
@arabmotorcycle8633
@arabmotorcycle8633 4 жыл бұрын
Seanman 14414 try this website as I buy all original parts from them. www.motorcyclespareparts.eu/en/suzuki-parts/motorcycles?gclid=Cj0KCQjw-af6BRC5ARIsAALPIlXfzoIc5MY9r0WFQ1Cy-FtaqT0RPSB9cuDbyeiONb6Aii4vaSewgRsaAhaAEALw_wcB
@arabmotorcycle8633
@arabmotorcycle8633 4 жыл бұрын
Seanman 14414 they called MSP motorcycle spare parts. They operate in Europe but deliver worldwide. They do fairings and all original parts
@mohamedamine8645
@mohamedamine8645 4 жыл бұрын
انتظر الجواب عن عداد دورت المحرك وأنت خرجت عن الوضوع
@arabmotorcycle8633
@arabmotorcycle8633 4 жыл бұрын
Comment which motorbike video i should do next.
@kwizzlerz
@kwizzlerz 4 жыл бұрын
where did you get the lower fairings? i can’t find them anywhere
@user-uc6mn8yr1k
@user-uc6mn8yr1k 4 жыл бұрын
واو أنا أحب الفيديو! شكر
@boogaplays123
@boogaplays123 4 жыл бұрын
Hi
@toxictrainer7110
@toxictrainer7110 4 жыл бұрын
Hello good video