Mason's Gun Room

Пікірлер

@domingomercado8340 9 сағат бұрын

😮 nice 🔫

@alexishernandez6092 2 күн бұрын

Can’t fucking order these cus I’m in Chicago maneee 😭😭😭

@MasonsGunRoom 2 күн бұрын

Sorry you have commie morons running your state, praying for ya 🙏

@solomonpearson1295 9 күн бұрын

You are a genius I had this same idea regular mags thou

@MasonsGunRoom 8 күн бұрын

It's an awesome little chassis if you have an extra handgun laying around. With the stock mags it works perfect. It's a badass little kit to throw in a car or truck 👍 Thanks for watching!

@P4_Designs 13 күн бұрын

Best video I’ve seen of this yet. Thanks man!!

@MasonsGunRoom 13 күн бұрын

Thanks for watching! 👍

@gregorysloat4258 14 күн бұрын

I don’t have to worry about any of that. My double stack Glock 26 Gen 5 will take any other double stack Glock 9mm magazine. I don’t get those who think the double stacks are too wide. UnlessI think about it, I can easily forget I’m carrying.

@MasonsGunRoom 14 күн бұрын

To each their own brother, do whatever works for you! 👍 I'm a heavier dude, so the slimer profile of the slimline Glocks is more comfortable for me. Plus, the Glock 26 fully loaded is 4 oz heavier than a fully loaded 43x. Doesn't seem like a lot extra weight, but it counts when I carry in gym shorts or sweat pants. Thanks for watching!

@longloopslad1974 15 күн бұрын

Make sure your torque wrench is at a 90° angle when you’re torquing the flash hider down, or else the torque spec won’t be accurate. It looked like you had yours angled a little bit but I couldn’t tell super well.

@MasonsGunRoom 14 күн бұрын

No issues so far, but you're right. Good catch! I'll make sure to pay attention to that in the future. Thanks!

@stcktrading5227 16 күн бұрын

need another in depth review psa don’t limp wrist all love🫡

@MasonsGunRoom 14 күн бұрын

I'm currently making some modifications to the Apollo that I won't spoil 😁 Video is on the way

@randallbryant9456 16 күн бұрын

☆☆THATS GREAT THAT "PSA" MADE THOSE "MICRO 15 ROUND" MAGS,, BUT I WANT "GLOCK" TO MAKE THEIR "FACTORY 15 ROUND" MAGS FOR THE "GLOCK 43X MOS".🤙💥🤙

@MasonsGunRoom 14 күн бұрын

That would be nice, but I can't see that happening unfortunately. Glock is too tame in their production to try anything funky. They haven't really changed anything major in 25 years lol. Thanks for watching!

@randallbryant9456 14 күн бұрын

Well..I Hope "GOD" Can Change Them, So They'll Make Those Magazines.🙏💥🙏

@lovablepersona5000 18 күн бұрын

How important is it to be timed dead bottom center? What if it is off just slightly?

@MasonsGunRoom 17 күн бұрын

Not extremely important, especially if it's a flash hider. Some people will time their muzzle device slightly off in the direction the body naturally fights the recoil. You'll have to play around with it and see what feels the best for you. Dead center is just general rule of thumb 👍 Thanks for watching!

@polosam692 18 күн бұрын

does it fit glock 48 MOS

@MasonsGunRoom 18 күн бұрын

Yes, it does 👍

@kjj1924 19 күн бұрын

I want ine

@MasonsGunRoom 18 күн бұрын

It's a great first can, but if I'm honest with myself, I should've gone with the 36M

@saifjawaad Ай бұрын

Why are you slapping the mag into the gun if it's so reliable?

@MasonsGunRoom 29 күн бұрын

Good question! Almost all glocks can “slam load”. While inserting a loaded magazine, you can “slam” the bottom of the magazine on your hand or a hard surface and the slide stop will release, sending the slide into battery, chambering a round. It’s not the most reliable thing but it’s a cool “feature” that most glocks and a few other companies handguns have. In this clip, I was testing if the PSA mags could do it 👍 Thanks for watching!

@charleswilford8875 Ай бұрын

Good job

@MasonsGunRoom Ай бұрын

Thank you! 😁 I appreciate you watching!

@evandell8014 Ай бұрын

About the hollow points, humble marksman concluded that sig crowns really didnt function in any 2011’s. From the prodigy to the staccatto and even bull armory gave him trouble with every one of them because of the shape of the projectile.

@MasonsGunRoom Ай бұрын

Thanks for the info! I been trying out the Norma MHPs and so far, 100% reliability. I'll try and get the video out soon. Thanks for watching 👍

@julianaguirre1323 Ай бұрын

Buddy needs to get that left hand to actually grip hard. Just hanging out over the right hand.

@MasonsGunRoom Ай бұрын

Good advice 👍Support hand is everything

@julianalvarez2242 Ай бұрын

you should check out the plus 2, perfect for carry

@MasonsGunRoom Ай бұрын

I'm too fat to carry this thing 😂 I'll check them out 👍

@JoseMartinezcdg Ай бұрын

What kind of grip texture brand is that? Lol

@MasonsGunRoom Ай бұрын

Talon Grips 👍

@JoseMartinezcdg Ай бұрын

@@MasonsGunRoom thanks man

@MoJohnson58 Ай бұрын

What screws are those?

@MasonsGunRoom Ай бұрын

I can't remember what company I got them from, but they're titanium screws 👍

@MoJohnson58 Ай бұрын

Aw ok cool @@MasonsGunRoom

@scunt461 Ай бұрын

"now that is the ring-a-ding move, baby."

@PETE1760 Ай бұрын

Thanks for the video man. I was wondering in case I need a spacer where can I buy one? And thanks for mentioning not to use the crush washer, big help thank you.

@MasonsGunRoom Ай бұрын

Thanks for watching! I've seen packs on Amazon if you want to trust them, but most gun part online retailers (Midwest, Brownells, maybe PSA?) carry shims, spacers, and crush washers. You might be able to find something at Home Depot too lol

@PabloDamonte Ай бұрын

Great first review homie

@MasonsGunRoom Ай бұрын

Thanks man 🙏 Appreciate you watching

@Citizen2ACitizenLLC Ай бұрын

Great video bro! I just ordered one! Just sub’d. Thanks for sharing!

@MasonsGunRoom Ай бұрын

Thank you sir 🙏 and thanks for the sub! I checked out your channel, nice content brother👍 I sub'd

@Citizen2ACitizenLLC Ай бұрын

@@MasonsGunRoom no worries. Gotta support the community

@graham765 2 ай бұрын

Is 36 grain bulk pack subsonic through the 8” barrel?

@MasonsGunRoom 2 ай бұрын

Disregard the last comment, it took me a sec to get what you meant, I'm slow today. I'm not sure, but it looks like most are. Check out the chart on Ballistics By The Inch .com for more info.

@mweidner311 2 ай бұрын

Thanks for the help dude! 🍻 I'll be mounting my first one this weekend.

@MasonsGunRoom 2 ай бұрын

Hell yeah, no problem 👍 Thanks for watching!

@jabeznunez8785 2 ай бұрын

The folded stock was in the way of the ejector

@SauloHidalgooficial 2 ай бұрын

Very good video. Im thinking on getting me one. Congrats

@MasonsGunRoom 2 ай бұрын

Thank you 🙏 Loving mine! Thanks for watching 😁

@sharedpollard4407 2 ай бұрын

The main thing i got from this is no shims are actually needed for ASR flash hider. That is good because i wasn’t 100% sure. I use ASR flash hider on my rifles and single port ASR muzzle brakes on my pistols, which do need timing and shims.

@MasonsGunRoom 2 ай бұрын

I’m glad my video helped! Thanks for watching 😁

@Bursar60 2 ай бұрын

Is your safety and easy flick up or pretty tough? Mine is and trying to figure out how normal b4 contacting them.

@MasonsGunRoom 2 ай бұрын

It was. Out of the box it was tough as nails to actuate with just the thumb, but after 250 rounds and a clean, it's nice and smooth Thanks for watching!

@PeachtreeVaporSuwanee 2 ай бұрын

He’s BAAAACK!!

@SgtChewy5 3 ай бұрын

A great comeback video by Mason of Mason's Gun Toom. I just saw his full review of this handgun, and now I want one.

@SgtChewy5 3 ай бұрын

I can't believe I missed this video. Great Review and made me want to buy one too. Keep up the good work!

@MasonsGunRoom 3 ай бұрын

Thanks Chew! 👍

@Circ1209Tactical-fl8mu 3 ай бұрын

I’m loving my Apollo 11 compact so far, just wish I had more optic options

@MasonsGunRoom 3 ай бұрын

I agree, options for the RMSC footprint aren't great. Basically just Holosun 😂 I'd assume someone will make an RMR plate for it soon Thanks for watching!

@user-fe7om7lk2j 3 ай бұрын

Is this the new Dragon's Dogma game?

@MasonsGunRoom 3 ай бұрын

😂

@xubi8902 3 ай бұрын

liked and gave it 5 stars; it really MAKES YOU FEEL like you are OUTSIDE Mason’s Gun Room

@MasonsGunRoom 3 ай бұрын

liked, loved, and gave your comment 5 stars; it really MAKES ME FEEL like you like OUTSIDE Mason’s Gun Room 😂

@xubi8902 3 ай бұрын

@@MasonsGunRoom liked and gave your reply 5 stars; it really MAKES ME FEEL like you INTERACT with your fans.

@MasonsGunRoom 3 ай бұрын

I'M BACK! Yippeee! Sorry about the long wait, life's been a bit hectic and I've been quite lazy 😋 Welcome to all the new friends that joined these last 2 months! I appreciate each and every one of you! I've got a great initial impressions video from the Apollo 11 attached to this video, and I'll have a 1000 round review out soon! Stay tuned! Thanks for watching! Love you all! ❤️

@Zachaccount93 3 ай бұрын

Your buddy needs more trigger time lol

@MasonsGunRoom 3 ай бұрын

Truth 😉👍

@kdizz928 3 ай бұрын

how much this build run?

@MasonsGunRoom 3 ай бұрын

*Prices are from 3+ years ago* I paid ~$1000 USD not including the suppressor. 22 Charger from a local shop for $200 ODIN Chassis for $225 KIDD Barrel and Internals $180 on sale Franklin Binary $169 on sale Midwest Buffer Tube $150 SBA3 Brace $100 Thanks for watching!

@kdizz928 3 ай бұрын

@@MasonsGunRoom nice vids. Thanks for the reply

@MasonsGunRoom 3 ай бұрын

@@kdizz928 Thank you brother! And not a problem 👍

@rascal0175 3 ай бұрын

I have zero interest in full auto, but a binary trigger in a .22 makes a lot of sense. It’s both fun and practical. Nice video.

@MasonsGunRoom 3 ай бұрын

I agree! It's my favorite range toy for sure! Thanks for watching!

@kevinwhite5920 3 ай бұрын

Instead of loctite or rockset use teflon pipe thread tape. Works great. Been using it for forty years, never had anything come loose including suppressors on full auto. Tighter add more wraps, looser add less wraps. Removal is super easy and leaves no residue.

@MasonsGunRoom 3 ай бұрын

Interesting! I'll give it a try 👍 Thanks for watching!

@user-ev7wq7ii7f 3 ай бұрын

كم سعر هذا السلاح

@MasonsGunRoom 3 ай бұрын

I built it from a Ruger 22 Charger for ~$1000 👍

@user-ev7wq7ii7f 3 ай бұрын

@@MasonsGunRoom شكرا لك ياصديقي

@MasonsGunRoom 3 ай бұрын

@@user-ev7wq7ii7f 🙏 thanks for watching

@MrContemplation 3 ай бұрын

I feel like this won’t stay cheap for much longer.

@MasonsGunRoom 3 ай бұрын

For sure! Get em' while they are 👍 Thanks for watching!

@quaternio 3 ай бұрын

Am I just too cautious for being a little concerned about slag coming back with the .460?

@MasonsGunRoom 3 ай бұрын

You're probably right lol

@Patrioticfamily 3 ай бұрын

My gun shop just gave me 5 bullets of these for free said try em out. I know you’ll be back for more 😂

@MasonsGunRoom 3 ай бұрын

They're badass, I love em' Thanks for watching!

@jasonkidd1689 3 ай бұрын

Almost had me until it doesn't like hp. Probably why it's under a grand😅

@MasonsGunRoom 3 ай бұрын

I understand for sure. Still a killer piece for competition or plinking! I've been testing a few different companies for a video and have found a handful it likes, should have the video out next month 👍

@josephlong7420 3 ай бұрын

This may have already been mentioned, when ising that torque wrench with the armorer's tool, the torque wrench should be 90 degrees from the axis of tool. Using them parallel gives you inaccurate torque measurement.

@MasonsGunRoom 3 ай бұрын

I was not aware of this, thank you for informing me! 😁👍

@calvinnewberry5915 3 ай бұрын

Brakecleen is your Freind

@susanmcpeterson1136 3 ай бұрын

Why wont my spring click onto my follower ? Like its very loose and can slide right off

@MasonsGunRoom 3 ай бұрын

Hmmm, my follower has 2 tabs on the inside for the spring to lock into. Can you see the tabs on yours? And are you trying the correct side of the spring?

@susanmcpeterson1136 3 ай бұрын

@@MasonsGunRoom its still loose I ran 100 rounds thru it and it was fine no jams. And yes I followed how yours looked

@MasonsGunRoom 3 ай бұрын

@@susanmcpeterson1136 Interesting. I mean as long as it works 😂

@dallasgearsgodpettman1941 3 ай бұрын

The reason people love PSA is cause they fill market areas that other companies fail to fill orrr just won’t even try. The people speak and PSA listens

@yoparsons80 3 ай бұрын

I just bought this promag😂

@MasonsGunRoom 3 ай бұрын

😂

@gomitoz35town 3 ай бұрын

what trigger shoe is that one?

@MasonsGunRoom 3 ай бұрын

I.T.T.S. Trigger from Tyrant CNC 👍 Thanks for watching!

Ең жақсы KZfaq

Пікірлер