Replaced the leaking manifold but now the motor runs continuously without pumping!
@SimonRML245626 күн бұрын
I went to Kaercher here in Austria , you are meant to put 5W 40 oil in the chamber , not the grease ..... the grease is used for the seals and rubbers .....
@stimpetta25 күн бұрын
This is at odds with Karcher UK advice. Perhaps you have different machines in oz?
@CliveandJeanWest2 ай бұрын
Hi I've had my K4 Full Control in bits several times and eventually replaced the cylinder head and hey presto it was no longer leaking. However after reassembling there is no high pressure. Does the bottom part of the cylinder head have to go in a specific place or as its triangular can it be any order. Or an other suggestions as to the problem and how its resolved? thanks
@stimpetta2 ай бұрын
Yes, the bottom part can go in any way around. Sometimes a very small bit of dirt can block the holes in or out of the plastic head. I (now) always take all the white plastic valves and springs out and give them a wash before reassembly. Hope this helps. Oh and don't forget to clean the pull out plastic filter where the garden hose connects to the machine.
@noormancrabb64283 ай бұрын
A very useful video. Is there a torque setting for the head bolts?
@stimpetta3 ай бұрын
Thanks. I'm not sure what torque they should be. But very tight... to loosen them you should need to stand on the metal body of the assembly and loosen with an allen (hex) key in a on a ratchet.
@garyowen5983 ай бұрын
12 - 15 nm according to the spec sheet
@Mr4fksake4 ай бұрын
Had the switch not working on mine, turned out to be the the internal spring that operates the alloy lever assembly onto switch, the spring had rusted and snapped, karcher rip you off for the complete assembly as they dont sell the spring separately, I managed to find a spring supplier who I got some from, rebuilt it which worked fine, also had to buy the top sections of pump assembly as they were causing a leak, rebuilt now works great ! 👍
@stimpetta4 ай бұрын
Yes, I have seen this too. A nice stainless steel spring would be good! I have also fixed a switch that was not working. These can be levered apart and the contacts cleaned, reassembled and save you £6 for a replacement switch :)
@mileswhite80042 ай бұрын
Same issue here....Whee did you buy new spring? Please share links if you bought online?
@redprince31585 ай бұрын
Where has all the oil gone 😨
@Ninjavaz8 ай бұрын
Just had the same issue. Replaced the top part of the pump. It’s a failing piece common to all of them. Couldn’t see the crack even with it disassembled and because the top metal shield covers it in use, you cannot really see where the leak is. I think I paid around £20 for the new part and machine is good as new again.
@Mr4fksake2 ай бұрын
Yeah also had to renew both top sections, fixed it all for 50 quid and then Lidl sold brand new ones for 50 quid with a 3 year warranty !
@tontobb89569 ай бұрын
I thought oil was supposed to be put into snide to lubricant
@tonyprice787310 ай бұрын
It’s the black plastic control unit that’s leaking. You’ve left it in the shed with water in it over winter and the water has frozen causing the plastic to break. It needs a new control unit IMO.
@stimpetta10 ай бұрын
That could be the cause. I found I made a mistake on reassembly. I put too much antiseize on the bolts and this seems to have stopped them going all the way in. After meaning out it all bolted together and worked
@marknaylor5814 Жыл бұрын
What grease is it? Part Number? I can't seem to find out the correct type online I couldn't make it out on the video. Thanks
@stimpetta8 ай бұрын
Not sure of the part number. We think it might be some sort of PTFE grease (?) it costs £70 a tube from Karcher. TBH I might try some lithium grease at that price.
@mileswhite80042 ай бұрын
@@stimpetta £70 a tube? a brand new K4 is only 200!! they clearly want it to be uneconomical to repair them.
@Kaachinjsh Жыл бұрын
This isnt too much grease over there?
@stimpetta Жыл бұрын
Yes in retrospect a touch too much grease. But it runs fine anyway :)
@Kaachinjsh Жыл бұрын
@@stimpetta can you please name that white grease? Thanks
@stimpetta Жыл бұрын
@@Kaachinjsh I used the super expensive grease from Karcher. But from what I've read Lithium grease would work too.
@Kaachinjsh Жыл бұрын
@@stimpetta is there any other similar greases?
@garyowen5983 ай бұрын
@@Kaachinjsh WD-40 spray grease
@S40TBS Жыл бұрын
Oops thats life 👍
@dwaynedibbley15923 жыл бұрын
If you get into trouble, just pull out a teacake. It works everytime 😉
@tonypate91746 жыл бұрын
Ying ding ding ying Great stuff need to go the workshop (shed) now and give the old not so "Supa"5 a kick over and lay some smoke over Mr Das Audi Auto snob nextdoor 200BHP/Litre from 125 in 1961 ! All over his smug head.
@stimpetta10 жыл бұрын
Video to give a view of what I do
@macbet10 жыл бұрын
Hi Garry - nice vid. Is that Somethin' Else as in the media/games/production company?
@stimpetta10 жыл бұрын
***** Yes, that Somethin Else they also do lots of radio too!
@MarinusMakesStuff11 жыл бұрын
Hey man, you should see my video about it, mine is about twice as long and gives a completely different sound.
@emilybrody738611 жыл бұрын
these are awesome i have one at home only mine is different