It’s a NAPOLEON Built-In 500 Series 32 in. 4-Burner Built-In Natural Gas Grill in Stainless Steel And there is a gap between the bottom of the grill and the base of the cabinet. I used the included side gap fillers/covers that comes with the cabinet to partially cover that gap

The price of this bushing has come done quite a bit since I bought it in early 2023…. a.co/d/c0G7Eqd

Yes, my spare tire in the spare location is a 32.1” 255/75R17 BFG KM2 MT that has full threads (never used). My running tires are 32.76” when brand new and now that they are half worn…maybe 32.5” tall. That’s at 38 psi. And when I’m offroad, I air down to 18 psi. So, I figured I can adjust the tire height with the amount of air pressure. And I figured a 0.4” difference in tire size was okay to get me off the trail and into a tire shop. Also, I would try to repair my flat tire with the tire repair kit or the sidewall patches that I carry.

It was included in the price by Premier West Gears to swap in the 8.2 rear axle housing and retain the sway bar. Transferred in the sway bar brackets from my 8.0 rear differential housing

Yes, that’s a victory 4x4 external molle panel mounted on a stock oem roof rack with universal awning brackets from exigex However, Exigex has a molle and bracket kit that mounts to stock oem roof rack exigex.com/products/gx470-molle-panel

@@MHam1 thanks a bunch!!!

It’s an aftermarket kit from Australia amts4x4.square.site/product/120-prado-gx-470-auto-shift-lever-repair-kit/2

I was prepared with a bug net for my head, organic bug spray, and candles! Only had to use them at certain times during the day. I was there 3 days.

I did not get individual prices for specific work. I had a contract to get the ADU built per approved plans and I had a payment schedule of 10 payments based on completed work and passed inspections.

Nothing complicated, but I did have to screw on one of the side brackets that came with the cabinet to provide a solid base for the Napoleon grill to sit on. The grill was about 1/8” too narrow Other than that… love the setup.

It’s in the video…I have a template shown in the video

Good luck!

It’s a short optional offshoot as you driving to the caves…don’t remember the coordinates

@@MHam1 oh awesome! It’s not part of the part that’s been closed off?

You're welcome!

Auto or manual?

@emmanueldahn1433 automatic…GX470s did not come with manual transmission

My son lives in it.

One way to get financing is to get an equity line of credit on your main house to build the ADU. Another way is to refinance your house and take cash out. And finally, you could research if any banks have ADU loans. I heard some might offer this now.

@@MHam1 Alright. Thank you very much.

I didn’t check and it’s not well known issue on transfer case shifter

@@MHam1I ended up using a string magnet I had laying around from an old hard drive so the right won’t slip off while changing from 2-L it was actually happening to me changing from 3 to 4 not anymore I’ll probably grease that up for there is metal to metal contact but that’s it mines a 4runner ‘07 as a wise man once said hopefully it will last me another 20 years ☺️

Those are 285/70R17 Nitto Ridge Grapplers in E load The rims are 17x9 -12 offset MB Wheels 352 (Similar to the Method 703s)

Unfortunately, my general contractor left the original gas line and gas valve sticking out at the bottom. He never put the 90-degree gas valve, so my unit is not flush with the wall. Just be aware that the gas line needs to be in the right place too. Anyways, my unit is in an open space surrounded by cabinets, but one day I’ll get a plumber to come and redo the gas line.

Thanks!

Thanks!

gobiracks.com/product/gobi-lexus-gx470-rear-ladder-driver-side/

Yup…it’s $100K now for the construction and rising

Standard 8’ celing for this detached unit. I came up with the floor plan and had a draftman draw the blueprints

@@MHam1 Thanks

Thanks!

Yup…people crying when I tell them my son lives in the garage! They can’t imagine it’s a real apartment.

I didn’t quite find the right spring on amazon, so it’s better to get this kit amts4x4.square.site/product/120-prado-gx-470-auto-shift-lever-repair-kit/2 I did find a 5mm x 35mm pin dowel on amazon, but they sell in packs. I did combine an ink pen spring (from a pen I had laying around) and a spring from Amazon 4mm x 15 mm x 0.8mm wire, but springs are also sold in bulk. In the end, my solution worked but ended up spending like $15 in a pack of pin dowels and a case of assorted springs. Since it wasn’t a perfect fix, I decided not to link the parts nor sell a kit. amts4x4.square.site/product/120-prado-gx-470-auto-shift-lever-repair-kit/2

So the link on top of this comment is the correct correct pin and spring the ones from Australia web? I'm running same issue

Yes, get the pin and spring listed on the Australia web site. Google search to see if it’s available in USA. I made my own kit from parts from Amazon, but I could not get the perfect spring. Easy to get the pin dowels from Amazon.