5 ай бұрын
9 ай бұрын
Пікірлер
@pbfamous07 2 ай бұрын
genuinely love my redback rotary. got it about 2 yrs ago. hasn't missed a beat. just need to add the x-y to the collection. cheers fellas.
@opalquest 5 ай бұрын
Hi, what's the maximum distance the receiver and laser can talk / self-align each other? As in can I put the laser on a strainer post and the receiver 300m away and wait for the laser to find it? cheers
@RedBackLasers1 5 ай бұрын
The laser can track to the receiver at a distance of around 50m and can pick up the laser over 300m. For more information on the fencing application best to call the office on 1800 769 858.
@IchimonjiBlade 6 ай бұрын
So how do we check the check the laser/lights on the sides? I don’t think this method works for those.
@RedBackLasers1 6 ай бұрын
Assuming the lasers geometry was originally set up correctly and assuming that it hasnt suffered a major drop, If the horizontal is good on both axis then the verticals and plumb should also be good. To check vertical lines you can set up a plumb bob line and check against that. Alternatively if you have a 360 style laser you can check the verticals against each other for consistancy. Hope this helps.
@blamzybutler8439 7 ай бұрын
Looks like a pain in the ass this why not just use a theodilite
@RedBackLasers1 7 ай бұрын
Certainly can use a Theodolite but that will be a two-person operation. The RedBack laser and Fencing kit is a single-person job and you also get a standard rotating grade laser level for other jobs you may have.
@mintslice2214 7 ай бұрын
no micro adjust on the 3d3x series?
@caseymiller8040 8 ай бұрын
❤️ Promo`SM
@bryangrocke9476 10 ай бұрын
Clear as mud
@RedBackLasers1 10 ай бұрын
We have a newer version of the Fencing Laser kit now and a new video to go with it here. kzfaq.info/get/bejne/qJqEq7Zpy7DJg5s.html
@user-uq3kl4ru4s 10 ай бұрын
Never knew how this worked before, very informative video!
@jns777 Жыл бұрын
Alignment of Lazer
@soapybee4471 Жыл бұрын
Red backs the best value for money I use one of there lasers regularly and owned it for a few years now still as calibrated as the day I bought it as I use it for finer fencing work I want one of these though I can think of many uses other then this for it
@Pegsy83 Жыл бұрын
Hey mate, Great vid! Do you have any outlets in Perth I could get one from?
@RedBackLasers1 Жыл бұрын
Toolmart are our stockist, they only keep a small fraction of our range but can always order in. Alternatively you can order direct off the website, regular freight is free. Express freight is an option, cost depends on the item required.
@RedBackLasers1 Жыл бұрын
Also Prime Industrial in Bunbury
@danponlaser7279 Жыл бұрын
great
@pbfamous07 Жыл бұрын
Honesty the best rotary ive ever bought. Without even considering Australian owned. The fellas at Geelong are always super helpful and don’t care how stupid your question is. Customer for life. Thanks guys
@nicolepacheco716 Жыл бұрын
How do we contact you from the USA. I checked your website, but there is an error when I fill out the contact sheet.
@grantcookson255 Жыл бұрын
email is [email protected]
@terrabyteonetb1628 Жыл бұрын
I got 1, only thing I wonder how long the rechargeable batter will last (years?), and how long can it hold charge? The older non lazer ones had removable batteries.
@AzTurboMini Жыл бұрын
I've had mine for a year and I'm sure as you've found out it it won't lose charge when not in use and hold a good charge when in use. These lithium ion batteries should last 5 years of light homeowner use as long as you don't leave it fully discharged for a long period of time. I use mine for all things homeowner plus I sharpen knifes with a fixed angle sharpener 3-4 times per week and put it through it's paces 3-4v hours a day, sometimes longer finding and keeping sharpening degrees consistent.
@helenrobinson8137 Жыл бұрын
🄿🅁🄾🄼🄾🅂🄼 😣
@danponlaser7279 Жыл бұрын
great
@nicolasblondeau2878 Жыл бұрын
Awesome video. Thankyou very much
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@haydenthomas4920 2 жыл бұрын
When are you guys doing an instructional video on your machine mount lasers ? Would be a great help.
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@allandocater6296 2 жыл бұрын
Woodglut is a good solution for every woodworker.
@dgb5820 2 жыл бұрын
25 metres give or take 5 metres 🙀
@danponlaser7279 2 жыл бұрын
look goods it is great
@danponlaser7279 2 жыл бұрын
great
@soapybee4471 2 жыл бұрын
Good idea I wouldn’t mind seeing one in full tilt with a contractor using it
@RedBackLasers1 2 жыл бұрын
We have refined the design since that video we should have a new video showing the production model in the next week or so. If you subscribe to the channel you will get notified of the new video. Hopefully we can get a contractor video sorted soon after that. Thanks for you interest.
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@danponlaser7279 2 жыл бұрын
great
@ashdunn3992 2 жыл бұрын
This is a solid bit of kit when it arrived. It is very well built. However I didn't have too much success. My friend and I bought two of these auto tracking bases and here is my feedback when using my Uni laser LS900BX Green beam with the "D" mode selected on this base (we tested 2x Auto tracking bases). I believe my "D" mode (detector) is the same as "P" (Pulsing), just depends which laser you have. Electronic Base: - Under 10m. The receiver in Auto tracking mode will work and picks it up nearly every time. There were times where it didn't but vary rare at that close range distance. - Over 10m. Complete different story. In Auto tracking the receiver couldn't pick up the line laser nearly 95% of the time, it just kept on spinning and then switch off Auto tracking mode. Laser it self was levelled as it is electronic auto levelling. Im not sure if maybe its my laser model which doesn't like the receiver however it was working under 10m so..... Receiver: - Under 6m. Using the receiver for incremental left and right changes works no problem but you need to point the remote in the general direction of the base - Between 10-20m. The remote need to be pointed exactly in the right spot at the right angle for the base station to pick up the receiver, otherwise it won't pick it up. Very annoying and a lot of the time you cant always get the right angle. I think once these two issues are addressed this piece of kit would be a game changer!
@RedBackLasers1 2 жыл бұрын
Hi Ash. The range of the auto track base is very much dependent on the laser you are using. We find when using a class3 green beam (German Osram Diode) such as the RedBack XLG44 it will pick up pretty reliably up to about 15m. With a cheap class 2 red beam its about 6m, a better quality class2 redbeam up to about 10m and a class3 red beam such as the RedBack 3L360R over 20m. These auto track bases communicate with the receiver via infra red (like your tv remote) so you need good line of sight often having the laser and base on a tripod raised a little of the ground helps. Another hint is if you have 4 vertical lines, turn them all on, this increases the chances of being detected sooner. We would tend to use them ourselves at about the 10m distance with most lasers, as its long enough to get an accurate alignment. Once locked on you can pick up the receiver and detect the laser way beyond the 10m mark. A cheaper red beam will pick up at about 20m and higher powered red and green up to 40m with the auto track receiver. I hope this helps.
@kevinrusso6849 3 жыл бұрын
An interesting work area you have got mate
@harleyrozeboom7826 3 жыл бұрын
!?!?????????
@NarinderSingh-om5bh 4 жыл бұрын
Sukhraj engg works Purchase
@jattpurmafiakash3261 5 жыл бұрын
अपना फोन नंबर देंगे
@singforfun8574 5 жыл бұрын
✌🏽
@EldeNova 5 жыл бұрын
Found this vid after an ad here on YT - Just popped by to say what a sick corner shed you got
@viktorperalta3090 6 жыл бұрын
What is the difference between the red light laser and the green light laser
@seamusfitzgerald6506 6 жыл бұрын
Can the laser be used outside without the receiver for line levels . Thank you
@designscapesltd4690 8 жыл бұрын
it doesnt go down to a dot when toggling.
@RedBackLasers1 8 жыл бұрын
Well spotted, that was an error it actually goes to a very small arc providing a bright 400mm line at 5m from the laser level. If you want to produce a level dot place the laser on its side and the dot at 90 degrees to the rotating beam can be shifted left or right using the remote control slope/man direction buttons.
@designscapesltd4690 8 жыл бұрын
+RedBackLasers i thought mine was broken when you said goes down to a dot. i even went out to truck and got it and had a play. When you say "pick up a right angle off the top of the laser" how are you picking that up? visually? i can see it when using outside.
@designscapesltd4690 8 жыл бұрын
+DesignScapes LTD *cant
@RedBackLasers1 8 жыл бұрын
All lasers are difficult to visibly see outside over any real distance, but a dot laser in conjunction with a target and laser enhancement glasses will give best results but don't expect more than about 15m in full sun conditions. The duller it is the further you can see the dot. The following link has an image of a laser (different model but principles are the same) on its side with a target picking up the dot and then using the receiver to pick up the rotating beam (now vertical rotation) at right angles to the dot. The receiver will pick up the rotating beam up to 250 to 300m radious from the laser. www.redbacklasers.com.au/images/arl509square.jpg
@RedBackLasers1 9 жыл бұрын
Also watch the introduction video for the CX440 here; kzfaq.info/get/bejne/ld6WqcRozs26XX0.html
@RedBackLasers1 9 жыл бұрын
Also watch the unboxing video for the CX440 here; kzfaq.info/get/bejne/g5OddKydxsqrZoE.html
@RedBackLasers1 9 жыл бұрын
Watch the how to use video here; kzfaq.info/get/bejne/btxihNqX2rqbYmQ.html
@RedBackLasers1 9 жыл бұрын
Watch the how to use video here; kzfaq.info/get/bejne/btxihNqX2rqbYmQ.html
@RedBackLasers1 9 жыл бұрын
Watch the how to use video here; kzfaq.info/get/bejne/btxihNqX2rqbYmQ.html
@RedBackLasers1 9 жыл бұрын
Watch the unboxing video here; kzfaq.info/get/bejne/g66fnMl9rq26c6s.html