@pdxxjjeep good question but I don't know, you'd have to cross reference. I have seen other models using this same method.
@paulmburu503Күн бұрын
Hi my name is Paul I have a Toyota hiace 2010 model yeah. if the vehicle was 60kmph the slip light came on what can I do plc
@ShawnMartinNCBIRDMANКүн бұрын
@paulmburu503 you might want to have the wheel speed sensors checked.
@amandasolis6184Күн бұрын
Thank you so much! Been using a straw bent in half to open it since we got our Avalon two years ago. I’m going to replace this asap!
@ShawnMartinNCBIRDMANКүн бұрын
@amandasolis6184 here's to the creative ways we've been coping!!
@da-de-max.heavyhaul98243 күн бұрын
Nice job. I am gonna try it on a tundra
@Dragonfire31945 күн бұрын
Thank you so much!
@ShawnMartinNCBIRDMAN5 күн бұрын
@dragonfire3194 you're most welcome!! Ride On!!
@zosin89705 күн бұрын
I didnt hear if you said but do i need to drain the engine oil to perform this?
@moeromano420211 күн бұрын
Do these work with the FZ1-N?
@ShawnMartinNCBIRDMAN11 күн бұрын
@mortomano4202 that's a good question but I'm not for sure Yamaha used the same bulb on the N. You may be able to check your bulb wiring connector to the bulb base Ibshow in my video and see if they match?
@NickStavrakis16 күн бұрын
Awesome and useful video! My truck was driving me nuts with it wanting to go into the other lane when turning with 35s. I just did the reset so hopefully it will work for me as well haha. Thanks!
@ShawnMartinNCBIRDMAN16 күн бұрын
@nickstavrakis I hope so too! Took me a few times going around sharper corners not to tense up even after this fixed it!! Lol!!
@ChuckisOutside16 күн бұрын
Did you make a part 2 video for this brake controller?
@ShawnMartinNCBIRDMAN16 күн бұрын
@chuckisoutside I haven't had a chance to use it to haul anything on a trailer with brakes, which is supposed to be part 2. Sorry!!
@saikatdasgupta993617 күн бұрын
❤
@christopherluce329418 күн бұрын
I just ordered the part. What’s funny is mine is on a 1999 Avalon. Apparently they used the same part on many models for many years. Hopefully tomorrow I’ll have mine. I’ve been using a package of tissues to prop up the release handle so I can go back and open the door.
@ShawnMartinNCBIRDMAN18 күн бұрын
@christopherluce3294 I wonder how many different ways this broken hinge has been temporarily remedied!! I prefer the push button karate kick to the jammed paper method! Lol
@stacky512a19 күн бұрын
Going to be installing this today, but i am going to cut out the so called cup holders and put real drop in cup holders.
@ShawnMartinNCBIRDMAN19 күн бұрын
@stacky512a that's a great idea!
@chrisavent801225 күн бұрын
Hey have this same problem with my 2006 Toyota 4 runner. Whenever I take a hard right or left or even on the same turn you took in the mountains it does the same thing where it brakes while I turn. We tried to replace the entire front and back abs wiring system and that didn’t work. Been trying to figure it out. Will try this out to see if it fixes my problem. Any suggestions?
@ShawnMartinNCBIRDMAN25 күн бұрын
@chrisavent8012 someone else replied and said this worked for their 4Runner. Even if you asked a dealership to do the VSC reset for you, it would be worth it. Sucks all the suspension work was done. I guess it's all new now but maybe not needed.
@chrisavent801224 күн бұрын
@@ShawnMartinNCBIRDMAN we had it zero calibrated bc I have a 3 in lift but it still makes that noise and brakes when turning.
@paulcolberg638828 күн бұрын
I just installed the kit on my 2015 FZ1. your video helped a ton with the install and the set-up. thanks a bunch!
@ShawnMartinNCBIRDMAN28 күн бұрын
@paulcolberg6388 heck yeah! It's nice to have. Would be great if they just came stock!
@MotorcycleMayhem59528 күн бұрын
I have a 2009 that is fully uncorked and dyno tuned. It's scary fast.
@ShawnMartinNCBIRDMAN28 күн бұрын
@motorcyclemayhem595 I agree 100%!! Mine still has the cork and no tune and will always be head and shoulders beyond more able to rip than I am as a rider!
@MotorcycleMayhem59528 күн бұрын
@@ShawnMartinNCBIRDMAN I actually just recently acquired the bike it sat for 9 years in a garage unused. The thing is this bike has different shorter gearing than the R1 so they had to retard the ignition from the factoy in 1,2 3rd gears.
@ShawnMartinNCBIRDMAN28 күн бұрын
@@MotorcycleMayhem595 that's cool! Hopefully the rubber, gaskets and seals didn't go bad! I swapped my front sprocket to a 16T and put in a PCV, it likes to get up and go even more than before!!
@austinkunkle4103Ай бұрын
Holy commercials batman
@bladeofwarАй бұрын
Thanks for the vid, saw your review on Amazon which led me here and pulled the trigger on em. I've heard of Shogun and I like that they are made in the USA.
@ShawnMartinNCBIRDMANАй бұрын
@bladeofwar that's awesome! Glad you found the video!
@jascam1Ай бұрын
What's the reason for not showing the actual PIN connections with the jumper wire?
@ShawnMartinNCBIRDMANАй бұрын
@jascam1 are you saying while I'm inserting it in during my count while I'm showing the dash so you can see what happens when the lights change their flashing?
@carllucci2974Ай бұрын
Those are great, I'm running the same ones.
@ShawnMartinNCBIRDMANАй бұрын
@carllucci2974 how long have you had them? Do you get any flashing from vehicles coming the other direction?
@donfinkey692Ай бұрын
What happened to the before and after pics?
@ShawnMartinNCBIRDMANАй бұрын
@donfinkey692 did I miss that?
@germanshepherdlover2613Ай бұрын
I thought the front sprocket nut was 36mm?
@ShawnMartinNCBIRDMANАй бұрын
@germanshepherdlover2613 I think I added a note in the description, 2008 and older gen 2's had a different size nut than mine. Totally random but true.
@RobertWachalaАй бұрын
Who makes the cruise control
@ShawnMartinNCBIRDMANАй бұрын
@robertwachala should have links and names in video description for easy access.
@mikeberecochea2020Ай бұрын
I like the simplicity of the this mod. Just curious, with this setup you state the fog lights work without the key and won't this drain your battery if they aren't manually turned off? I know at night it's easy enough to see, but what if you bump the button while cleaning the car during the day, you wouldn't necessarily notice them being on.
@ShawnMartinNCBIRDMANАй бұрын
@mikeberecochea2020 yes you run the risk of leaving it on and running down the battery. The other option is to run the power for them off an ignition-switched power source so you could still have fogs anytime you want as long as the ignition is turned on, and still not reliant on the headlights being turned on (and not canceled out when high beams are turned on as well). It's a mixed bag just depends on how you want to do it!
@user-pc9it4tq3xАй бұрын
Привет.подскажи упала демферная резинка ротора в двигатель,это критично?
@ShawnMartinNCBIRDMANАй бұрын
@user-pc9it4tq3x there are some people who have dropped them if you can get a little grabber tool and pull it out from the opening it fell through that is best, otherwise you need to remove the exhaust and drop the pan to take it out. A borescope would be a great tool for finding it 1st.
@user-pc9it4tq3xАй бұрын
@@ShawnMartinNCBIRDMAN благодарю.спасибо очень помог.от души🤝
@ShawnMartinNCBIRDMANАй бұрын
@@user-pc9it4tq3x you're very welcome!!
@giopirmisashvili5514Ай бұрын
Thank you ❤
@ShawnMartinNCBIRDMANАй бұрын
@giopirmisashvili5514 you're welcome!
@jamescollins-fi3no2 ай бұрын
Where are the magnets? And what makes this rotor better than original?
@ShawnMartinNCBIRDMAN2 ай бұрын
@jamescollins-fi3no the magnets on any upgraded rotor are inside a metal sleeve so that they can't come undone from the epoxy like the original rotors do.
@gomez6192 ай бұрын
THANK YOU!!!! I've seen this solution before, but NO ONE would talk about WHY they were doing it!!! My 2014 was definitely FIGHTING ME on LEFT TURNS at 35-40MPH.... THANK YOU!!!!!!
@ShawnMartinNCBIRDMAN2 ай бұрын
@gomez619 I saw what you saw...people chasing phantom issues looking at faulty ABS systems and wheel speed sensors. YOU'RE WELCOME!!
@cliffordlebel29772 ай бұрын
This is exactly what my 2012 Tundra is doing. Do you know if this works on Tundra as well?
@ShawnMartinNCBIRDMAN2 ай бұрын
@cliffordebel2977 I am not aware if it does or not.
@stevent79442 ай бұрын
Did anyone find a good link to the correct switch or a different site? I am not finding the switch with all four auto up and down.
@ShawnMartinNCBIRDMAN2 ай бұрын
@stevent7944 not sure why KZfaq didn't share your comment but carpartstrim has them in different color illumination if I'm correct. I shared that info in the description.
@hamishlovesit47312 ай бұрын
Thanks
@ShawnMartinNCBIRDMAN2 ай бұрын
@hamishlovesit4731 you're welcome!!
@thankthemosthighgod91352 ай бұрын
Great video
@ShawnMartinNCBIRDMAN2 ай бұрын
@thankthemosthighgod9135 thank you for the feedback I appreciate you checking out my video!
@andypeach32262 ай бұрын
Hi. Thanks for a nice balanced video and description. This is my next job on my FZ1N.
@ShawnMartinNCBIRDMAN2 ай бұрын
@andypeach3226 excellent! Peace of mind is worth it. Pj'sChurchofSpeed has a good deal on the rotor and gasket. He's in the FZ1 Facebook groups too.
@alexandria3042 ай бұрын
You did not talk about how to clean the filter ???
@ShawnMartinNCBIRDMAN2 ай бұрын
@alexandria304 sorry about that I wasn't checking it at the time buy the manual that comes with it has easy instructions.
@samuelrodriguezrivera68563 ай бұрын
Cool!
@ShawnMartinNCBIRDMAN3 ай бұрын
@samuelrodriguezrivera6856 thanks!!
@ScottFuselier3 ай бұрын
any other ideas about where to get the master switch? The suggested Cartrimhome site now doesn't load at all.
@kevinmcdonnell66293 ай бұрын
hello im from the fz1 facebook group.thx so much for these videos.
@ShawnMartinNCBIRDMAN3 ай бұрын
@kevinmcdonnell6629 thanks for the feedback and you're welcome!!
@sekaf41253 ай бұрын
Well done!
@ShawnMartinNCBIRDMAN3 ай бұрын
@sekaf4125 thank you!
@text90033 ай бұрын
Thanks Shawn! The method of opening the door is a lifesaver! (still having problems with the door, spring seems okay, but now I understand the mechanics much better).
@ShawnMartinNCBIRDMAN3 ай бұрын
@text9003 awesome! Yeah it was getting a little embarrassing at the gas station when I couldn't find a long enough stick, so a good bit of pride went into making this video!! Hahahaa!
@ronvictor26223 ай бұрын
I used some of you guys advice in comments and checked my fuse box: turned out it was some loose fuses due to riding over America's finest roadways 😅
@tomfrancisco44873 ай бұрын
Works for 2004 Lexus GX470! Excellent!!
@ShawnMartinNCBIRDMAN3 ай бұрын
@tomfrancisco4487 it would be nice to have a full list of all the Toyota models and years this works with!
@sekaf41253 ай бұрын
I have a 2001 FZ1. I hope this will work for it. Thank you for the post
@ShawnMartinNCBIRDMAN3 ай бұрын
@sekaf4125 I haven't looked in so long I'm not sure it is a direct fit for the gen 1 FZ1...
@sekaf41253 ай бұрын
Excellent. Thank You!!!
@ShawnMartinNCBIRDMAN3 ай бұрын
@sekaf4125 no problem, thanks for checking out the video!
@JustABlackTacoma3 ай бұрын
Hello where you get those fog lights I’m wanting some of those but only have those for 2013-2015 tacoma
@ShawnMartinNCBIRDMAN3 ай бұрын
@justablacktacoma I ran these they should have them for gen 3 if that's what you're looking for: kzfaq.info/get/bejne/prOcjKxqzNvdiqM.htmlsi=2hpEBJQKFnSPeZUm
@JustABlackTacoma3 ай бұрын
@@ShawnMartinNCBIRDMAN I have a 2nd gen as well 2009 and been wanting some fog lights like the ones you got in yellow
@ShawnMartinNCBIRDMAN3 ай бұрын
@@JustABlackTacoma link and info in description!!
@JER19803 ай бұрын
How did you add the D rings to the front bumper? I have an 06 and all the kits are for 09 and up. Thanks!
@ShawnMartinNCBIRDMAN3 ай бұрын
@jer1980 I ran these on mine not sure what's different about 2005-2008...? kzfaq.info/get/bejne/i9tyZs-Ky8_WmXk.htmlsi=xcKqQA8yTpNj8wbC
@sergpereira62793 ай бұрын
AIS block off ? What does it do ? Thank-you
@bainer663 ай бұрын
Hello, did you notice much difference in fuel range after changing down to the 16T?
@ShawnMartinNCBIRDMAN3 ай бұрын
@bainer66 good question, but I haven't really been in a situation where I've been riding hard with the 16T, since technically I can roll the throttle less with a 16T and achieve the same RPM as the 17T did. Just riding normal and shifting through the gears in the same amount of time I'd be wound up higher so that would make sense I should lose MPG. All traffic or all mountain roads? That I haven't been able to check. I just know it gets to it (RPM) quicker than before!
@erniray13 ай бұрын
Just received mine (Amazon), pulled out plastic battery tab, no light. Bummer.
@ShawnMartinNCBIRDMAN3 ай бұрын
@erniray1 they're simple watch batteries if you want to replace it.
@germanshepherdlover26133 ай бұрын
Great video. Does the speedo read faster than you are doing or slower than you are doing after you switch to the 16T front sprocket?
@ShawnMartinNCBIRDMAN3 ай бұрын
@germanshepherdlover2613 I share that when I fix it with my speed healer here: kzfaq.info/get/bejne/qtxgdNdqysvMaHk.htmlsi=eRgjseAjoCWpUmZe
@jeredthomas63413 ай бұрын
I have the super 50 with dual out on my 2012 4.0 and i love it
@barryoverson49883 ай бұрын
i ordered the pressure switch and the socket 75.00 buck yesterday thought about it went out to see what else i might need opened up the under hood relay fuse panel started wiggling things around most of the relays and fuses weren't pushed all the way in so i seated them all properly got in started up the 2015 Crisler town and country the check Eng. mil lit was off so instead of buying the switch and socket i bought an air filter and an cabin air filter oil filter and five quarts of penz 5/20 full synthetic motor oil drove 35 miles after clearing the code PO 520 and PO523 CHECK ENG light never came on again i think it was intermittently loosing electrical connection i took your advise found the eng info screen found i had 80 psi cold 35 psi warmed up so yaa your video helped me a lot just to think do something not just throw parts at it saved me money that i will put back to maintenance instead that woman probable sold that car so cheaply cause of all the troubles she had caused by someone pulling all those relays and fuses out and just barely making connection i think she was getting scammed by some one that was working on here car its a nice car not fully loaded i think blue book might be over nine thousand dollars she wanted 3500.00 bucks wife offered her three thousand she jumped on it without a flinch it must have been an ordeal most the time i just ignore dummy light but the wife told me it was leaking oil turns out it was her old Jeta leaking this is why i love you tubers they make videos about everything and anything imaginable i need to make some dumb ones but i embarrass my self im going to make something no matter how stupid i look