Is it stock or have you done a few things? Also are you just holding down the traction control button to turn everything off. My truck keeps defueling when I try to get down like that.
@Stalindevassy7 күн бұрын
Can we able to convert 2016 jetta 1.4 tsi manual to dsg? And what would be the cost
@Turbojooe9 күн бұрын
Hey dude. How do you determine if your software is above or below the one it specified other than it coming up error not available? Thanks in advance
@NeuroPulse10 күн бұрын
Do I need to empty my tank before doing this? My tank is full but one guy said it would overflow if I don't bring it down to 1/4 tank first.
@prestofixit35189 күн бұрын
@@NeuroPulse not too sure. I think anything under half a tank would be fine.
@Way_Q_sexy12 күн бұрын
yo what mods have you done besides the exhaust and intakes?
@joezhang83912 күн бұрын
How do you reset the brake light in this instance?
@vixhocampusano375919 күн бұрын
Stock turbo and intake?
@prestofixit351815 күн бұрын
No cold air intake and k04 turbo
@OGRagehole28 күн бұрын
You can also take the black Parking brake box off of the caliper and rewind that plunger inside of there with a drill and I believe its a T25 or T30 Torx or equivalent size allen bit. Much easier doing it that way honestly. Took me like 20 minutes to do the whole job.
@eduardoocon126929 күн бұрын
What’s your tune??
@SirCrazayyАй бұрын
Does this work for a mk4?
@Jason-qg1gxАй бұрын
No offense, but you guys doing car videos have to get gopros
@filipenunes7436Ай бұрын
My stock golf tdi runs better than that.. you should check your tune
@prestofixit3518Ай бұрын
Post a video let’s see it!
@luciano-eo6vkАй бұрын
summarizing, all that have to be done is to pull the stock tune ecu file off to remove the tcm communication error code and then flash the stock tune ecu file back on the ecu to solve engine light issue. And as an option, you can reflash using a GTI tune ecu to have quicker shifts. Is that correct?
@prestofixit3518Ай бұрын
Yea you are right about the first part! You can flash a gti file on the computer and it will work just like a dsg car! No bucking and everything works good. Only problem being the tiguans never came with a dsg in the states. So when you flash a gti file the computer takes it fine, but all the other modules don’t like it cause they are all programmed for a Tiguan. So all the abs traction control stability control and epc lights are all on and won’t take the coding to shut them off. So still working on a solution.
@WilliamSodre-yw2qqАй бұрын
Hi, nice work!! I trying to conclude a 09G to DQ500 swap, but my switch lever stuck at P with P light blinking. I connected the two can wire, a disconnected the pin 3 wire in the lever connector. Can you help me?
@williamcox29962 ай бұрын
ASV valve issues ?
@user-xf3gg4yn3l2 ай бұрын
Thanks. Prepping for spark plug replacement and was concerned about the coil connectors breaking. After watching this I feel more at ease.
@Ally.MacMillan2 ай бұрын
Thanks for sharing. It’s best not to apply power to the actuator like that, especially when it meets resistance like that, as there are belt drives and gear drives within the actuator that can be damaged. Best to remove the actuator and wind the brake by hand. This is of course in the absence of a scan tool, or diagnostic software which is ultimately best practice.
@Masterboy1032 ай бұрын
How did you fix the U0101 code?
@prestofixit35182 ай бұрын
You need to have a tuner delete the code from the ecu.
@maryyei2 ай бұрын
thanks. Hello, would it work for Tiguan 2009?
@SpikesMavic2 ай бұрын
Great vid thank you, but how did you release the brake with gnision switched off, or did you leave keys in ignision ?.
@fdghn456716 күн бұрын
I put my key in the ignition to the on position without starting the car, pressed the brake and handbrake switch to take the handbrake off then took the key out of the ignition. make sure the car is in gear with the front wheels chocked
@Big_AlMC2 ай бұрын
Rolling coal? Bad tune. Do better
@prestofixit35182 ай бұрын
You’re so right 😂😂
@GarzaDiesel2 ай бұрын
😎
@shawnwilt71962 ай бұрын
Would a 16 inch pry bar be long enough?
@JacobCanale422 ай бұрын
Got my swap up and running, however I cant find out where to put pin 7 on the DQ250 connector. It is the speed signal wire, do you remember where you connected it?
@prestofixit35182 ай бұрын
Pin 7 should be blank. The dsg only needs a few connections to work. Runs most of the systems off the fan network.
@JacobCanale422 ай бұрын
@@prestofixit3518 I am getting a code in VCDS under trans. P0726 RPM Signal from ECU. Assuming it’s because I don’t have anything connected there. Might be a little different as my vehicle is a 2015 Sportwagen but still had a 09G.
@prestofixit35182 ай бұрын
@@JacobCanale42 depending what dsg you got to replace it with most of them have the same wiring. It’s a can high and low wire, a switched and a constant 12v, a ground, Kline, and a shift interlock. That’s all I had to hook up for my transmission and it’s worked fine since.
@thegodfreyspecial4232 ай бұрын
Is there any chance you have a basic parts list for this!?
@yendys692 ай бұрын
Hello. Is same Procedure for when changing the mechatronic unit?
@OfficiallyHooked2 ай бұрын
I got a stage 2 tiguan right now. Thinking k04.. but you think an engine rebuild is needed for this? Was looking at an HPA Turbo.
@prestofixit35182 ай бұрын
I mean depends if you are already having problems and maintenance history on the vehicle. My car was neglected and behind on regular services. So not long after tuning it I had oil consumption problems and snapped a balance shaft. But if you are up to date on services you should be ok.
@thekop90492 ай бұрын
Thank you so much. 🎉🎉🎉
@danieldoernen99833 ай бұрын
Thanks for that video. Still relevant after 2 years 🎉
@Maverickf22flyer3 ай бұрын
Because all VAG are garbage!
@user-zo6ne9bt5b3 ай бұрын
Tell me what the reason is, the remote start does not work if there is no key in the lock
@Hoodlumz902213 ай бұрын
Just curious do you know what the look circle thing under the car is for? Is that a tow hook
@user-tt7wm2qt8q3 ай бұрын
What is the tool your using called that’s pretty handy
@prestofixit35183 ай бұрын
It’s a power probe 3. Can get them on Amazon for like 100$ I think.
@lachlanboli28593 ай бұрын
How did you get anti lag on yours?
@prestofixit35183 ай бұрын
Custom tuning
@lachlanboli28593 ай бұрын
@@prestofixit3518 would you be willing to tune mine? Im building mine with ARP head studs JE Pistons and IE Rods with a K04
@prestofixit35183 ай бұрын
@@lachlanboli2859 I don’t do tuning on gas engines. But if you wanna send me your file I can add 2 step for a fee.
@gilmastag4133 ай бұрын
Turns out the cylinder im having a misfire on has a broken connector, ill see if thats the issue ,cheers man!
@prestofixit35183 ай бұрын
Yea I would definitely check it out! I was having that problem too
@Skyhaven023 ай бұрын
Sick man love it
@prestofixit35183 ай бұрын
Thank you!
@georgiereano60043 ай бұрын
Hey what's up how much do you charge to program a clock spring
@prestofixit35183 ай бұрын
I’m not too sure never done it for someone else. Where are you located?
@georgiereano60043 ай бұрын
@@prestofixit3518 miami
@Mr786Addzy3 ай бұрын
Is it a problem if you cant get the terminals to sit flush all the way in the front when setting them back in
@prestofixit35183 ай бұрын
It might be a problem. If they don’t click in they can walk out and cause more misfires
@stevehopf49113 ай бұрын
Link for the part?
@_Volkhunter_3 ай бұрын
I want to do this build so bad. A tiguan with a 2.0t with a dsg and stance it lol
@prestofixit35183 ай бұрын
That’s what I’m doing lol
@_Volkhunter_3 ай бұрын
I love how he went from no engine light to having an engine light 😂
@prestofixit35183 ай бұрын
Yea the ecu won’t communicate with the dsg so it trips a code.
@user-su1zt9qc5d4 ай бұрын
After a DSG swap is performed.... Can it be tuned? And could this be done on a newer Tigaun/Q3?
@prestofixit35184 ай бұрын
Yes I have tuned the dsg and the engine no problems. Not sure if it could be done on newer ones.
@TiagoogaiT894 ай бұрын
Hi there, this is compatible for all dsg? 6 and 7 ?
@prestofixit35184 ай бұрын
Wiring diagrames change for each dsg. Also different axels trans mounts. I know a dq500 7speed can be swapped and the dq250 6speed, that’s what I used and it’s been good!
@alexbeaudoin70254 ай бұрын
Hey man I have a Tiguan aswell and I was wondering if you could help me out on where I can get my parts to have mine built like yours and also am wondering what kind of a project I would be getting myself into!
@prestofixit35184 ай бұрын
Yea! I just called a local junk lot and told them what I needed and they pulled everything for me!
@Pelinas4 ай бұрын
Great job working only with one hand
@prestofixit35184 ай бұрын
Thank you! It’s really hard to do without a head mount 😂
@jtorocaraballo4 ай бұрын
Is this doable in a b7 passat? I know the diesel version has a dsg trans
@chipking18604 ай бұрын
I guess it is a nice vid, can't hear a thing, both volumes up 100% you need to speak INTO the mic. MAke another one please
@cayden8084 ай бұрын
Hey man do you think this would help solve the issue of my VW Eos jerking during acceleration only from a complete stop? This has become sort of my last resort to fixing this problem
@prestofixit35184 ай бұрын
Sorry it’s doing that. If a fresh fluid and filter change and adaptation doesn’t fix it’s probably the mech unit going out
@simon70304 ай бұрын
Great information should have done this ti my TDI's would have helped out lots and put less work on the injection pump to draw fuel from the tank as I run a twin tank system with used veg oil in the main tank.I can see the new unit has a side tube which must be to allow excess fuel to return into the tank so the lift pump doesnt put too much pressure on pipes especially a I run a non return system just loop fuel back into the injection pump.Thanks for the effort to make video.
@prestofixit35184 ай бұрын
Thank you for the reply! Do you still have your Jetta?