14 күн бұрын
Ай бұрын
Пікірлер
@drockjones1315 3 сағат бұрын
Considering this or the btr stage 1 for A4 ws6. Do you like this cam?
@nufnuffz28 2 сағат бұрын
Yes. The new btr cam lineup is stout
@drockjones1315 2 сағат бұрын
What's the driving manors like with a stock converter?
@nufnuffz28 Сағат бұрын
@@drockjones1315 fine with a good tune
@DiscoverObjay 7 сағат бұрын
how’s it held up ?
@nufnuffz28 7 сағат бұрын
Faster now. .. stock motor. Procharger is easier and makes power easier though
@jimmyfreeze3782 15 сағат бұрын
Skip this place for dyno tuning...TSP3 cam is junk compared to the TSP2. Compare the numbers from TSP website. Tuners that go by stage # are the ones to avoid.
@nufnuffz28 8 сағат бұрын
Most cam companies use Stage numbers, not me. We only call them what they are named... Regarding this car, the TSP 3 performed better than the 2 that we have worked on/tuned in other cars.(we have tuned 100s since this one) sonwe compare real world numbers.
@paisley2342 Күн бұрын
Fbo, probably wouldve gained the same and sounded better
@nufnuffz28 20 сағат бұрын
Add bolt ons now and make 450!
@cutty4086 Күн бұрын
Prochargered SS guy here too, how do you guys mount the MM catch can in that location? Mine is on opposite side by the blower & would like to relocate it like this.
@jeffhaire1984 7 сағат бұрын
They had to completely remove my windshield washer reservoir to mount it there.
@cutty4086 2 сағат бұрын
@@jeffhaire1984 mine has also been removed. Would like to know how they mounted it.
@duanerudder6834 Күн бұрын
Job well done as always.
@nufnuffz28 7 сағат бұрын
Thanks
@vincentmccullers8231 Күн бұрын
Class A Mechanics! You guys done a awesome job
@el_cuh2147 Күн бұрын
what cam is that i want to cam my 05 silverado 4.3 v6
@nufnuffz28 Күн бұрын
Stock with a custom tune I did
@el_cuh2147 Күн бұрын
oh nice do you know the horsepower?
@nufnuffz28 Күн бұрын
@@el_cuh2147 it only has an intake, exhaust, and tune. Maybe picked up 30 or so.
@wccoates Күн бұрын
That’s pretty damn good power for stock manifolds and cats!! Really impressive
@nufnuffz28 Күн бұрын
We agree
@wizardsleeve8651 2 күн бұрын
Here in Australia all you need to do is buy the cheapest Holden model available and everything will be non chrome 😂😂.
@SWMORACING123 2 күн бұрын
You guys wanna sell the car?
@nufnuffz28 2 күн бұрын
It's been gone, unfortunately. BUT we have a stock IOM one that needs some work that we may let go soon
@osotj 3 күн бұрын
Could you help install and tune mine I’m in NC
@nufnuffz28 3 күн бұрын
Email [email protected]
@randoroberts 4 күн бұрын
Thing already made 630 lb-ft at 3400 rpm !
@nufnuffz28 Күн бұрын
These are torque monsters
@SrtHemiPower 4 күн бұрын
What what does it run in the quarter
@nufnuffz28 4 күн бұрын
10.2 about 50 hp ago
@Johnny-jr2lq 5 күн бұрын
Okay I have a question planning on doing the AFM/DOD delete. With cam lifers and new gaskets on my LC9. And I was bitten by the while I’m in there big. So I’m gonna do new oil pump etc. etc. is it possible to get a oil pump with to much volume for a lc9. I just want to put a good oil pump in my truck after doing the AFM/DOD delete.
@travishenderson4663 5 күн бұрын
That thing sounds EPIC!
@btucampbell1591 5 күн бұрын
Do you daily this?
@craigstrickland1572 5 күн бұрын
If you didn't eat a hot fudge cake at Shoney's then you didn't eat at Shoney's. Miss the one in D-town. Nice car btw. Whiteville, or Wytheville? The second one locals pronounce "Withville"
@craigstrickland1572 5 күн бұрын
It ain't no yellow IROC but she sounds nasty.
@robinwendt5527 6 күн бұрын
Keep making videos guys... do some more full builds I guarantee ur numbers will go up...people wanna see the work not just the numbers. The dyno videos are still cool but we wanna see more
@blaketerrell1021 6 күн бұрын
aye bro i know this is from a while ago but did you get that painted? if so, what is that color on your truck?
@jsjdhwbsbwbbq 6 күн бұрын
Stock trans
@nufnuffz28 6 күн бұрын
Yes
@jsjdhwbsbwbbq 6 күн бұрын
@nufnuffz28 well enough said lol that's good
@decortec2 7 күн бұрын
Very nice NA numbers. Great job fellas!
@nufnuffz28 6 күн бұрын
Thank you, sir. Hope to swap intakes soon. It's been too long!
@gatesj777 7 күн бұрын
I just did mine. It had the groove and I used the melting green ring. I lubricated it with oil first but it pushed in hard… once pushed in it seemed like there was a reasonable amount of movement though. Same exact behavior after replacement, 30psi hot idle, it always had at least 40 before about 20k miles ago. Coming up on 300k and I was hoping this would fix it. So these aren’t supposed to push them fairly hard?
@Chalrzz 7 күн бұрын
So procharger better then a torque storm
@nufnuffz28 7 күн бұрын
100%
@Chalrzz 7 күн бұрын
@@nufnuffz28 you think I can touch 700 wheel with a base torrqstorm I got a stage 3 btr cam on a 6.2
@Chalrzz 7 күн бұрын
That’s all I’m looking for is 700 wheel
@Johnny-jr2lq 7 күн бұрын
Getting ready to do the same thing with my 2012. But I might do a stage 2 MAYBE I don’t want to start breaking other stuff. The whole point of swapping the cam is to get rid of AFM/DOD.
@TonyTheTruckGuy 8 күн бұрын
Well done as usual, and congrats on 5k subs!
@nufnuffz28 7 күн бұрын
Thank you!
@TonyTheTruckGuy 8 күн бұрын
I have to do this on mine soon lol. Was trying to figure out the best fix and was also thinking of just using 2 long bolts. This popped up in perfect time haha.
@nufnuffz28 8 күн бұрын
Awesome 👌
@jennyruiz5108 8 күн бұрын
How long was the wait time
@nufnuffz28 8 күн бұрын
Got it within a couple weeks of paying for it
@theoutofpocketdream 9 күн бұрын
My old wheels 😂
@nufnuffz28 7 күн бұрын
Look great
@ivansalinas3511 9 күн бұрын
What converter would you guys recommend for this set up?
@nufnuffz28 9 күн бұрын
3600 or so
@slimymurican8246 9 күн бұрын
Is that a 1500 with a HD front fascia?
@nufnuffz28 9 күн бұрын
Yes
@joshjammer5716 12 күн бұрын
Are the ls3 injectors not enough for e85?
@nufnuffz28 12 күн бұрын
No. At 420 rwhp and 75% E, they are well over 100%
@miguelacosta8825 12 күн бұрын
i got a question???? does anything’s fuck up if you take the cumputer off and tune it without the truck?? the truck alr has a tune it just needs the efans programmed now
@nufnuffz28 12 күн бұрын
No. You can mail us the ecm and we can tune it
@robinwendt5527 13 күн бұрын
That's pretty sweet...like me a blower car with over 700whp!
@nufnuffz28 7 күн бұрын
Us too
@Freebaggin 13 күн бұрын
Who's presenting this vid guys? One or the other FFS
@nufnuffz28 12 күн бұрын
Glad you enjoyed it, 😆
@SLEEK888 13 күн бұрын
Genius about the check for oil o ring by jacking rear of truck up never thought of that
@nufnuffz28 7 күн бұрын
Works great for sure
@murraydonkin8916 14 күн бұрын
Another fantastic build team, well done 💪 I think Dusty said the heads had not been taken off so am I right in saying the lifters were not replaced when the cam was swapped? Just wanted to ask if it's OK to do that or do you prefer to fit new lifters when a new cam goes in? Maybe as this was a low mileage car there was no need, just interested in your thinking around this. Thanks as always for the videos and appreciate the efforts you go to producing content for us 🙏
@stevebucks2700 14 күн бұрын
Wouldn’t mind a ride around the block in that bad boy ! Sounds amazing!
@Drels3 14 күн бұрын
Have you guys done any 84MM torqstorm yet ?
@nufnuffz28 7 күн бұрын
Tuning one remotely now
@enjoyrevenge8146 14 күн бұрын
Would ls3 cam still pass emission in ca?
@gerardolopez5875 14 күн бұрын
Both low , and 1 on hi! Its not correct!
@aliravassipour 14 күн бұрын
Thoughts on procharger vs tvs2650 Maggie?
@nufnuffz28 14 күн бұрын
Procharger huys over here, but the 2650 works well as well ( toms of torque) we made a video a couple years back on roots vs centrifugal blowers
@HoldenRick 14 күн бұрын
That thing is rowdy! What gear?
@nufnuffz28 14 күн бұрын
3.45
@DHilliard48 15 күн бұрын
Great work you guys!
@nufnuffz28 15 күн бұрын
Thank you sir!
@user-ch3nv5uy3k 15 күн бұрын
0:15
@gregleenyit 16 күн бұрын
Y'all got G8s stashed all over the place. What's the deal with the old Sportster ?
@nufnuffz28 16 күн бұрын
That is April's!
@miguelrivera3383 17 күн бұрын
Thank you! I need a new handle for my G8 too.. those are hard to find !
@nufnuffz28 17 күн бұрын
You're welcome
@edtrbuza1107 17 күн бұрын
My son just bought this engine/trans combo to put in his 94 Roadmaster wagon. Any advice for him?
@nufnuffz28 17 күн бұрын
Keep it stock with bolt ons, use all the harnesses and computers it cane with and just take your time
@andresserrano2105 18 күн бұрын
Hey I was the guy you met today at the gas station I was wondering how much would you charge me to get my truck lowered?
@nufnuffz28 18 күн бұрын
Hey, sorry we don't. I'd ask Julian and Alex in Durham or Ranko in Henderson. We can tune it
@andresserrano2105 18 күн бұрын
@@nufnuffz28 yeah fs I’ll be down to tune it once I swap my engine and I’ll hit you up
@nufnuffz28 18 күн бұрын
@@andresserrano2105 sounds good