We could have given pcd for hole dimensions,in order to reduce confusion for stake holders. And instead of giving datums on the ribs we can control it by center hole itself. And cost estimation of parts was very useful, thank you.
@crazyingenieur32775 күн бұрын
1. There is no standard called out in the video. So I have no choice but to assume that it is either ASME Y14.5M-1994 or Y14.5-2009 because the committee removed concentricity and symmetry in Y14.5-2018. 2. All the dimensions technically do not meet the standard. For instance, ⌀36.00 ± .4 should be ⌀36.00 ± .40 for imperial dimensions or ⌀36 ± 0.4 for metric ones (yeah, details matter). 3. All concentricity callouts in the video are missing the "⌀" symbol in the feature control frame because the concentricity tolerance zone is a cylinder. 4. The flywheel part shown (timestamp 2:50) does not have a surface of revolution. So that one concentricity callout does not apply to other areas of the part. So you would need 3 concentricity callouts for each partial cylindrical area with a CONTINOUS FEATURE callout/flag. And that still does not cover the planar features of the part. In my humble opinion, a training company that claims to teach people GD&T should not make these mistakes. My advice for all viewers, please do your homework before buying subscriptions. You should check the credentials of the instructors, etc. Unfortunately, anyone can "teach" on KZfaq these days. There is no checking authority. So be careful. Always question. It is very easy to learn new things wrong. Do yourself a favor and buy the standard. It is a good investment and a good starting point.
@RustemmKh8 күн бұрын
dimension
@RustemmKh8 күн бұрын
How to change PMI dimention value?
@myigetit6 күн бұрын
We cannot change PMI dimension as it is the exact measured dimension of any entity. We can overwrite drafting dimension, but we cannot overwrite PMI dimension. But we can add appended text before, after, above, below etc.
@Bukaman119 күн бұрын
I can't see any profiles in structure system. They are available in weldment profiles. Does it mean i have to copy the sketches and create it the way it's made in the video? I use SW2020
@myigetit6 күн бұрын
Dear Learner, Here's the solution to your problem: The Profile Sketches are created just as any other normal SOLIDWORKS Sketch, & it doesn't involve any another environment as Structure System or Weldment for it to be created. SOLIDWORKS provides hundreds of Weldment Profiles by default & you'll most likely find what you need within those, but this webinar just shows how you can create custom ones if you need to. Only thing important to be remembered is that these custom profiles need to be saved using .SLDLFP (Library Feature Part) format exactly in the same folder location on your system wherein your default weldment profiles exist, but depending on the permissions for this folder you may have to save it to a temporary folder & then copy it to this folder or you may be able to save it directly from SOLIDWORKS to the default folder, but in any scenario, once you create your custom profile you'll want it to be in the default folder for SOLIDWORKS to point to it & actually make it a selectable item. Also, you need not copy any sketches from anywhere, you can create them & save them simply as per above instructions. Please make sure to go through the video from time stamp 5:52 to 7:11, the same written above is neatly explained. For further information, please check out www.myigetit.com to purchase the comprehensive SOLIDWORKS 2024 Weldments Course, also u can subscribe the various other bundles of latest advanced courses in SOLIDWORKS 2024. Do stay tuned for further updates, & don't forget to like, comment, share & subscribe to our channel!
@maryamgoli-x3wАй бұрын
Thanks a lot sir. your video training is very helpful.
@Peter_Peter_Curry_EaterАй бұрын
Why does the angle specified have no relevance to anything? You'd think zero would be on an existing plane
@myigetitАй бұрын
Here's the answer to your question - To create a section along an axis, you need to select an axis or arc so that the section will appear along that axis or the center of the arc. - The specified angle can be adjusted as per your requirement. You can set it to zero or any defined angle in the 'Rotate plane along axis' pane. In our i GET IT tech tip section, we upload short updates on new or technical features. For more comprehensive information, we offer a full SOLIDWORKS library of courses that explain detailed features with examples. We hope this clarifies your question.
@Peter_Peter_Curry_EaterАй бұрын
@@myigetit Hi again, I can get the section to work, but seething the angle to zero has no relevance to the world or local planes Shouldn’t 0 degrees be vertical or horizontal by default?
@Peter_Peter_Curry_EaterАй бұрын
@@myigetit any reply?
@qwery234Ай бұрын
Sir I have seen your videos @8.55 driver dimensions you told but you don't tell what is meaning by driven dimensions
@myigetitАй бұрын
In the webinar, our expert discussed driving dimensions, but let's clarify what driven dimensions mean: Driving Dimensions: - Definition: These are the primary dimensions you specify and control directly within the CAD model. They dictate the geometry and constrain the shape and size of the model. - Role: They define the exact size, location, and orientation of features in the model. When you change a driving dimension, the associated geometry updates accordingly. - Example: If you set a driving dimension for the length of a part to be 90 mm, changing this value to 130 mm will resize the part to 130 mm. Driven Dimensions: - Definition: Also known as reference dimensions, these are derived from the existing geometry and driving dimensions. They are not used to control the geometry but provide additional information. - Role: They display the results of the constraints and driving dimensions. Changing a driven dimension does not alter the model; instead, it updates automatically when the geometry changes due to modifications in driving dimensions. - Example: If you have a rectangle with driving dimensions for the length and width, the diagonal length can be a driven dimension. It updates when either the length or width changes but cannot be directly edited to change the shape of the rectangle. We hope this explanation helps!
@robertocesarresende57932 ай бұрын
EM PEÇAS COMPLEXAS FICA MAIS COMPLICADO
@ranasubs20342 ай бұрын
thank you, this is so useful!
@KyleNorris-p9d2 ай бұрын
Just curious why you used this instead of the weldment.
@myigetitАй бұрын
We used Structure Systems in this video instead of traditional weldments because Structure Systems is an advanced environment within SOLIDWORKS. While weldments allow you to design a structure as a single multibody part, Structure Systems offers more flexibility. It lets you create and modify structural members with different profiles within a single feature, simplifying the design process and making it easier to manage complex structures. We hope this helps clarify our choice. 😃
@MrJzplastic3 ай бұрын
I get it now
@philippelamberti90294 ай бұрын
Thank you, your video helped me
@danielcarpio43024 ай бұрын
Clear and detailed tutorial, thanks!
@MexicanSpinach4 ай бұрын
Is there a way to rename parts? I'm stuck with the "Physical Part" name.
@gauravkotkar37315 ай бұрын
I don't found this mechanism design in igetit app.
@myigetit5 ай бұрын
Please reach out to our support team through mail - [email protected]. I will also notify the support team about the course not being visible. Gaurav, Thank you for reaching out.
@ireshmutale83275 ай бұрын
Is there any free trial? How we get it
@myigetit5 ай бұрын
Hello, you can explore plans and select a free trial option - myigetit.com/plans/
@gauravkotkar37315 ай бұрын
Simple and good...
@HughT085 ай бұрын
If you right-click on the Mark Style Name it gives you an option to Export the style.
@TheDefeatest5 ай бұрын
Thanks !!
@kingston43346 ай бұрын
"Promo SM"
@abhijitpatil61146 ай бұрын
Plz stop I GET IT You making only one video in Indian trainer accent. But all other videos having foregion trainer. Don't take subscription don't understand the language & tone of foreign trainner.
@anthonysei6 ай бұрын
Nice tutorial. Sadly for me the basic functions don't seem to work so this translate and rotate with multiple servomotors is but a dream.
@abhilashkulkarni4936 ай бұрын
Informative Session 👌🏻
@tobykennethque41866 ай бұрын
just what I was looking for, thanks so much
@musicallyunpluggedmanish90237 ай бұрын
Great help to engineers thru these tips
@andraskovacs52477 ай бұрын
autodesk always manages to ruin the UI with each new version
@scottaw7 ай бұрын
Great overview of structures function, thank you.
@deucedeuce15727 ай бұрын
I can't get featureworks to do anything no matter what I do or to get any kind of feature recognition. Have had to spend countless hours of rebuilding parts just so they can be edited... but in doing so, I end up with 100s of extrusions and cuts... and having feature recognition could save me from having to do all that. It never prompts me to scan the parts at all when I open them and I can't find any way to do it after the part is loaded. I added the "data migration" tab to the toolbar and there is a "recognize features" option in there... but it's always grayed out and I can't use it for anything.
@davidmartinleegahangore40237 ай бұрын
Good morning. But what if you cannot edit this value. In my case I can't edit. I can only do it in "Default".
@skotodushegubka7 ай бұрын
CATIA sucks. french kind of a cheapskate
@kuei12157 ай бұрын
Why doesn't anyone list what version of the software they are working with? Why not list the instructions from the very beginning? IE...what module are you working in? Where are the icon tabs you have set up?
@Whhhoo3_39398 ай бұрын
woo... great videos... keep uploading more videos.....also do you know how to wrap toolpath on circular part in nx cam .... we want 3 axis toolpath wrap on cylindrical part to run on 4 axis. in thease videos there are some tricks but we dont understand because it not legal. any easy tricks you know??? kzfaq.info/get/bejne/mreAoJN2l6rYmac.html kzfaq.info/get/bejne/d75lfr1pr7HGZaM.html
@quyendohuu65338 ай бұрын
I am using NX 10 going to starting menu > Simens NX 10 folder but I can not see tool - NX command Prompt. Please help, thanks
@pedrohenriclima8 ай бұрын
Thanks! this was very useful.
@bitsurfer01018 ай бұрын
I like the knit method. It seems more like the combine command for solids.
@Avianator8 ай бұрын
my savior, thank you
@crazyingenieur32779 ай бұрын
Superb explanation of the foundation of GD&T!
@CHlCKENCHASER9 ай бұрын
Hi I was wondering if you could tell me how to change my settings. When I press the profile icon it only lets me press every 10mm. I can’t press on points like 68.84. Only 10,20 etc. please let me know if you would know how to resolve this it would be very helpful.
@adampohl18759 ай бұрын
I would like to make it so when I click New Drawing it uses My Companies Template, currently I have to go into the dialog and select the correct template
@huuanpmf9 ай бұрын
Thank you so much. This really helped me out of trouble.
@paolahuertafemat4869 ай бұрын
Many thanks!
@aerball9 ай бұрын
So annoyed with literally every one of these tutorials. I have Solidworks 2023 and I literally dont have the 3d textures in my appearances tab. I keep trying to figure out how these guys are getting the textures from but no site or video actually covers that.
@user-ge4xt5gk3e3 ай бұрын
Same did you figured it out
@Lucs1003 ай бұрын
Mine is under Appearances(colour) / Miscellaneous / 3D Textures - do you have the list of preset appearances?
@mnove119 ай бұрын
There is any kind of student licence for 3Dexperience?
@adampohl18759 ай бұрын
Nice one!
@adampohl18759 ай бұрын
You can also initiate the Line command by hitting the L key
@adampohl18759 ай бұрын
Awesome, Keep up the good work!! FYI a few CREO videos got added to your playlist. kzfaq.info/sun/PL4f8_OOL1lWs0j1LeoPfWhrIm7QoZCG5O
@KarthikeyanEkambaram-om4wt9 ай бұрын
@25:25 for hole maximum material condition will be smaller in diameter right, little bit confusing shall you please rectify my doubt.
@sudhanwapuranik7 ай бұрын
yes
@Bockwursty10 ай бұрын
Yeah... F* that... in Inventor I need to change one value in a drop down box and here I need to start the cmd window... NX is just a pile of shit.