Craghunter

Пікірлер

@Craghunter01 2 күн бұрын

amzn.to/4dNf6SU

@nickrogers1648 5 күн бұрын

Prolly a dumb question but how do you release your prusik if your not able to stand or lift body weight of the knot? Thanks for the videos.

@Craghunter01 5 күн бұрын

@@nickrogers1648 that’s actually a great question thanks for watching! When I break that prussic I’ll still have some thing under my feet to stand up with and release the tension. I also keep a hand ascender on my person if I ever need to reach up and grab something to release pressure. I’ll try to make a video showing how I do that sometime soon.

@marcusgigandet2048 5 күн бұрын

How long is that friction hitch?

@Craghunter01 5 күн бұрын

Started that one with about a 60” cord instead of the standard 48”

@blowinshtup6553 7 күн бұрын

it sounds possessed 😂

@lorenawohlfahrt835 15 күн бұрын

I always remove the auto brake prior to going into car wash.

@user-bp4dd1hh5d Ай бұрын

Really nice video on using a chain harrow. A big help. My ATV is belt driven, a 2014 Polaris Ranger Crew. Could I pull a 6 ft wide harrow or should I stick with a 4 ft width with the belt drive?

@Craghunter01 Ай бұрын

@@user-bp4dd1hh5d I’d think yours would pull the 6 ft easily. My atv is smaller than yours and I think it could have handled the 6 foot.

@user-bp4dd1hh5d Ай бұрын

@@Craghunter01 Thank you much for your video and your reply.

@joaquinlopez997 Ай бұрын

Thank you

@kasonwall5955 2 ай бұрын

Can’t wait to see the vid 🎉

@Craghunter01 2 ай бұрын

Tires: amzn.to/4bW5e8I Changer: amzn.to/45naBLQ

@LindsayCoulter 3 ай бұрын

Thank you!! Just had the most frustrating experience at the car wash haha wish I had watched this before 😂

@Craghunter01 3 ай бұрын

Glad it helped!

@WindTreeStudios 3 ай бұрын

Great video and instructions! Thank you!

@jeffb9586 4 ай бұрын

Enthenso then you flip the other end? Eyem from the same place as you so then I git your cusin right?

@shanewall4467 4 ай бұрын

Beaver Dam Mud Runner Motor Build kzfaq.info/get/bejne/e66nnNWXvqqXZJ8.html

@thiago147style 4 ай бұрын

brasileiro? e paulista? hehe... bons videos!!!

@free4all467 4 ай бұрын

That is as cool as all get out!!!

@wewetree8816 4 ай бұрын

Top speed?

@shanewall4467 4 ай бұрын

Maybe 15 mph or so? It’s pretty underpowered. I intentionally put too small of an engine on this boat. It’s a 16/48. I’m going to eventually swap this setup over to a 14 footer and replace this with a v twin engine on this boat.

@MishelleCoronado 4 ай бұрын

Two things. When going in ñ: Make sure automatic shut off is off. Then slide into neutral with very light to literally no tap on the brake. When coming out. Wait till you feel the back tire roll up to the automated bar that is rolling you through the car wash. Be patient 😅. Then when it rolls, hit the brake HARD as you place the car back into drive!

@frankresch3734 4 ай бұрын

Nice video just had a curiosity what size repel ring do you recommend?

@Craghunter01 4 ай бұрын

Thanks for watching! These small ones are what I usually keep on me. amzn.to/3VNTzDB

@Craghunter01 4 ай бұрын

amzn.to/3VNTzDB

@dalehorkey9540 4 ай бұрын

I use my Buddy Flex to warm up our enclosed screen porch (lanai) 0:28 where the wife and I have our morning coffee on our lanai. I sometimes have trouble turning the control from pilot to heat but Ive found there’s kind of a middle position and when I find that spot, the Buddy Flex starts right up. I have the Flex attached to a tank via a hose. Heats the lanai (~250 sq ft) from 40° up to 65° in 15-20 min. Great heater!

@spiercevaughn 4 ай бұрын

Nice. Been looking for a figure 8 for some of the sterling Xtec cord.

@tomhacic5827 4 ай бұрын

this is a great idea!! starting saddle hunting this year and this style of backup, definitely a huge weight of my mind, thanks!!!

@shanewall4467 4 ай бұрын

Thanks for watching! I’ve got some more videos like this planned for the near future.

@Hanuman9889 4 ай бұрын

😊😊

@gsatiucla5139 5 ай бұрын

Hi, thanks for the video. I've seen others place their Prusik below the Figure 8 or other mechanical descender. Please let me know what you think. Thank you.

@Craghunter01 5 ай бұрын

I think that’s perfectly fine. It holds the rope just the same. But I’m placing it above in this video because I’m using the prusik to climb then installing the figure 8 below. In theory the prusik is under tension as you apply the 8.

@jonkeith2624 5 ай бұрын

I have one I love mine I am a tree climber I use 1/2 rope on it does fine your not coming down fast but who cares I mainly use it in pine tree when am blown logs out I rappel down on the tag line lock it off put my notch in my only complaint is that it only rated for 14 idk if I would go on long repel with it and I always leave my flipline on to so it works out good for me

@RiegerKeith 5 ай бұрын

Thanks for this video! I have been dealing with this problem ever since I purchased my new 2024 Defender a few months ago. I read & searched the entire manual for a solution to no avail : ( Follow up question, if you do accidentally engage the "electronic brake" when shifting to neutral, how do you dis-engage it?

@Craghunter01 5 ай бұрын

The only way I’ve found to get back to neutral after engaging the electric parking brake is to either hit the gas, which disengages it, or to shift into park and restart the entire process. Thanks for watching!

@Craghunter01 5 ай бұрын

Figure 8: amzn.to/3T4OaX4

@guysolis5843 5 ай бұрын

Good video. How well does the visor keep saw dust out of the face?

@Craghunter01 5 ай бұрын

I have no complaints with the visor. It does an OK job keeping sawdust out. But I cut above my head quite a bit trimming Osage orange limbs and look up quite a bit.

@joetanga1352 6 ай бұрын

Good video, thanks for sharing

@Rody0335 6 ай бұрын

thnaks your share. I have a question, how to lock on double rope?

@DinsDale-tx4br 6 ай бұрын

I followed each step and it's just fine. The instruction book was so small I couldn't read it. :-) Thankyou|!

@Craghunter01 6 ай бұрын

You’re Welcome!

@Craghunter01 6 ай бұрын

Clipdraw: amzn.to/3SDGCdQ Bench Block I used: amzn.to/3HHfPHi Punch used: amzn.to/47WIRNF

@free4all467 6 ай бұрын

Love it! I’ve ordered mine.

@rileyriley2313 7 ай бұрын

Thank you just got one of these to put with a survival kit and the directions were adult proof😂

@Craghunter01 7 ай бұрын

That’s the truth!

@belowfray5251 7 ай бұрын

Good job

@Craghunter01 7 ай бұрын

Thanks! I appreciate it!

@tylerluck378 7 ай бұрын

They make that battery compartment child proof AF! Lol

@s3hooligan 7 ай бұрын

After the first embarrassment of holding up customers, I resolved to washing it in my driveway

@Craghunter01 7 ай бұрын

I almost did the same. The first trip was very embarrassing.

@free4all467 8 ай бұрын

That’s awesome!!!

@trxe420 8 ай бұрын

What MM Delta Link is that, 10mm? I use an oval Kong quick link, but I think thinking of switching to the delta triangular. What is the benefit if any to that? Also, is the one with the capture bar useful at all?

@Craghunter01 8 ай бұрын

That is the 10mm in that video, but I typically use the 8mm. I don’t think there’s any real benefit to using the triangular myself, it’s just what I have on hand for business purposes so that’s what I use. I wouldn’t worry about switching if you’re happy with the oval link.

@Craghunter01 8 ай бұрын

The capture bar you reference is designed to be used with an ascender on a harness. Not sure how it may be beneficial to a saddle hunter but I’m sure that with some creativity it could be somehow useful. Our community has designed some pretty creative secondary uses for some items so far!

@Craghunter01 8 ай бұрын

amzn.to/3RuTXVh

@rodneywren8526 8 ай бұрын

Good presentation

@rodneywren8526 8 ай бұрын

Nice weight room.

@Craghunter01 8 ай бұрын

Thank you. It doubles as a studio many times.

@Craghunter01 9 ай бұрын

Suspenders I used in this video: amzn.to/47tRKyx

@B_r_u_c_e 9 ай бұрын

Thank you.

@MissouriValleyArms 9 ай бұрын

Good video- I'd like to see the video of you up in the tree where you're prusik is activated in your decent, then you have to get it loose to continue you're decent. I guess you would have to re-attach your platform to get the load off the prusik so you could get it loose again. Just curious if you could get that prusik loose without a stick.

@OvGraphics 9 ай бұрын

Very good there Mr. hunter. You popped up on my scream this morning. My needs are a bit different. I was using a climbing tree stand but the darn thing failed. No possibility of climbing back in and nothing to stand on. Just hanging around. This is a scenario that I have yet to see covered. So I'm hanging, my harness connected to the strap around the tree. My escape theory goes like this. ALSO connected to the tree strap carabiner is a repel rope. The figure 8 is hooked onto the harness, the attach strap on the harness is cut with a knife and down safely you come. There has to be some variation of this that will keep me from destroying the harness to get to the ground. I need smart repel guys to take a serious look at this. The climbing stand mfgs ignore this, as do 99.99% of climbing tree stand users. There is a solution out there and I continue to look for it.

@Craghunter01 9 ай бұрын

amzn.to/3SqhDLd

@Craghunter01 9 ай бұрын

amzn.to/3SqhDLd

@spaceman8839 9 ай бұрын

Will this work for an 11mil static caving rope?

@Craghunter01 9 ай бұрын

Yes, the concept works. But the size of the ring and carabiner may need to be larger than what I am using in the video.

@pj5209 9 ай бұрын

Can you do a video at the end of the car wash on how to shift back into drive appropriately? Mine won’t shift into drive so I cause a scene at the car wash and need to turn the defender off and on to get it back into drive… @craghunter

@Craghunter01 9 ай бұрын

Yes. I will! That’s a great idea. You’re right. That is a struggle as well. It’s raining here now so it’s likely they’re closed for the next couple of days but as soon as they’re open I will.

@jeanmartox3570 10 ай бұрын

Vous faites un demi cabestan et c'est encore mieux!

Ең жақсы KZfaq

Пікірлер