DJ Southern Comfort

Пікірлер

@gymarines 5 сағат бұрын

Its really nice!!

@James.KingHTX 3 күн бұрын

Love seeing these Texas weddings!!! Good people!!! Thanks for sharing and great job!!

@James.KingHTX 3 күн бұрын

Man this Case is beautiful!!! Would you be interested in making more of them for your fellow DJ?? Love it!!

@djdannybhtx 3 күн бұрын

Same! Need one for a ProX Control tower. Can u quote us?

@James.KingHTX 3 күн бұрын

Really nice console man!! I’m sure people would pay good money if you produced more of them!!

@DJ_Southern_Comfort 3 күн бұрын

@@James.KingHTX I'm working on a few truly portable versions of it... coming soon🙂

@James.KingHTX 3 күн бұрын

@@DJ_Southern_Comfort oh wow can’t wait to see the videos!!! I’m in Houston so not too far from your area!!

@MIBLD 5 күн бұрын

How do you transport that, do you have any cases, if you do, could you make another video and show the cases? How do you transport that? How do you break it down, these are things that I noticed that was not in the video, how do you connect them step-by-step, how do you break them down and how do you put them away and what do you carry them in transport them in?

@DJ_Southern_Comfort 5 күн бұрын

@MIBLD The video was more of an assembly and introduction. A functional video can be found on the I2R Tech website. But I'm working on a follow-up, which should be out shortly. Thanks

@DJG.Music_ 15 күн бұрын

Really nice build! That t-slot is a game changer!

@ronaldguy5474 21 күн бұрын

Again, that's awesome. Sir, what's the plastic translucent material on a roll that covered the LED strip lights, and where can i order it? Thanks in advance.

@ronaldguy5474 21 күн бұрын

That's awesome sir. Great job! Im a DIY dude and im gonna give it a shot. Again, awesome job.

@DJ_Southern_Comfort 21 күн бұрын

@@ronaldguy5474 Go for it! Thank you

@michaelbrown5678 26 күн бұрын

I have one here in Tennessee.. Game Changer!

@DJ_Southern_Comfort 26 күн бұрын

Absolutely!

@warrenbleakley3255 27 күн бұрын

Great job one of the better home built consoles I’ve seen keep up the good work.

@DJ_Southern_Comfort 27 күн бұрын

Much appreciated, amigo...

@geraldfer Ай бұрын

I like this design...I have the DDJ-1000SRT... I'm mentally doing LED lights on yours... playing with ideas and bright white paint and or TV mount for upper tier racks... Thanks again for this informative video 🙂

@DJ_Southern_Comfort Ай бұрын

You're very welcome...

@DJ_Southern_Comfort Ай бұрын

Howdy ya'll... quick update. I've used the screen on several gigs. I added a 4K cam, and I can display the dance floor throughout the evening. It's been an absolute game changer, I have folks on the dance floor just to see them selves on the screens.

@James.KingHTX 3 күн бұрын

Damn When do we get to see a Gig Log with this beast!!!! Lets gooo!!!!

@Retrocowboy100 Ай бұрын

Very informative. I've been thinking of pulling the trigger. I worry about the extra weight. Do you think it would be better if the panels were made of aluminum? I think it would be awesome for a house gig, I just don't know about mobile work? What is your opinion? I setup a lot of lights and It already takes me a long time to setup. Thanks

@DJ_Southern_Comfort Ай бұрын

I have a harbor freight small rolling cart that I load and strap both cases. Easy in and out, installation is just as simple as pluging the video controller to my power supply and the hdmi in cable to my pc... That's it.

@DJBRAND-X Ай бұрын

This is dope! I can’t get the Raptor Liner shipped to Hawaii, but still very inspiring. Imma try a similar truck bed product from Home Depot. Good stuff man. 👏🏾

@DJ_Southern_Comfort Ай бұрын

Check your local O'Reilly auto parts store. Raptor liner is sold at O'Reilly here in the main land.

@shawntchiika262 Ай бұрын

Great job on this one! How heavy is this one compared to the other one? If I had a trailer I’d want something like this 😂

@DJ_Southern_Comfort Ай бұрын

This one is about 30 lbs... without all the gear... 75lbs fully loaded.

@mikebarrett2005 Ай бұрын

how much would you charge to build one for a rane 4?? this looks so amazing i wish i had wood working skills

@DJ_Southern_Comfort Ай бұрын

Brother, I wish I had the time... but currently, I'm just swamped. If anything changes, I will definitely let you know. Thanks

@mikebarrett2005 Ай бұрын

@@DJ_Southern_Comfort no problem man thank you for the response keep up the awesome work its very inspiring

@chrisfejeran4401 Ай бұрын

Looks Amazing!!!!

@DJ_Southern_Comfort Ай бұрын

Thanks

@Mrprich Ай бұрын

How did you modify the tripod stand to fit the speaker pole? What did you cut the speaker pole with?

@DJ_Southern_Comfort Ай бұрын

I cut it with a grinder and metal cutting wheel. I slid the one side into the other. I used some electrical tape and rapt it around the inner pole till it fit sung. I attached the with a 1/4 flat top self tapping screw.

@bizzybdj 2 ай бұрын

best diy ive seen. love the led. i clicked the link but doesnt work. any info on the transluscent roll. id like to buy some for a project

@DJ_Southern_Comfort 2 ай бұрын

Try this one.. www.speedwaymotors.com/Colored-Plastic-HDPE-Sheet-10-Ft-Rolled-1-8-Inch-Thick,1557.html?

@bizzybdj 2 ай бұрын

@@DJ_Southern_Comfort thanks boss. what part of texas you from. im in louisiana

@DJ_Southern_Comfort 2 ай бұрын

@@bizzybdj imin the north Ft. HOOD area... South of Waco.

@bizzybdj 2 ай бұрын

@@DJ_Southern_Comfort cool. Thouggt u might be closer. Im in lake charles. Anyway keep up the good work

@chaseflores2145 2 ай бұрын

Excellent work, I’ve been wanting to use extruded aluminum for a long time. Great design, very well thought out. DJ furniture is grossly overpriced. DIY is the only way to go

@DJ_Southern_Comfort 2 ай бұрын

Thank you... I agree its extremely overpriced. But I've always preferred to diy my stuff. It feels good.

@djtrend 2 ай бұрын

Great job! Been looking at this facade and this video was very helpful. Looking forward to some gig logs with it to see it in use more.

@DJ_Southern_Comfort 2 ай бұрын

Thanks, I have my first gig with it coming up in a week. I'm certain it's going to rock! I'll post a video.

@djchankamixmaster 2 ай бұрын

Awesome broo how much do you paid for booth frame and controller

@DJ_Southern_Comfort 2 ай бұрын

Thanks, approximately $1900 plus $668 for 4 50" TVs.

@MargaritoLievanos Ай бұрын

@@DJ_Southern_Comfort looks amazing!!! now that you have the facade, would you recommend to buy the controller separate to save $300-$400?

@DJ_Southern_Comfort Ай бұрын

@MargaritoLievanos I purchased the advance controller, and it's as simple as plug it and done. I don't know if any other controllers would be that simple.

@MargaritoLievanos 27 күн бұрын

@@DJ_Southern_Comfort Thank you!

@DJDjayVarela 2 ай бұрын

Great Work Sir

@DJ_Southern_Comfort 2 ай бұрын

Thanks

@djrichiesly6341 2 ай бұрын

Good morning sir, just wanted to say thanks for the inspiration I was finally able to complete my console based on what you did here. Just giving you your flowers sir.

@DJ_Southern_Comfort 2 ай бұрын

That's great news... make sure to post it on DIY DJ Booths on Facebook.

@TheHoovman81 2 ай бұрын

Love your stuff brother! HOOOOAAAAAHHHHH

@DJ_Southern_Comfort 2 ай бұрын

Thanks, brother... RLTW 🙂

@chanwerk 2 ай бұрын

SUP

@DJ_Southern_Comfort 2 ай бұрын

Sup! lol

@terranceburke5343 2 ай бұрын

@dj_southern_comfort, you killing me man!!! This is your niche. You were made to make these consoles. You can bake so much money, more then you DJ for, because a lot of business will come your way. You want to know why? Consoles like you are making, cost way over $2,000 to $2,400, and you can undercut the greed that’s out there. If you get 10 orders a week, and you sell them for $600 to $700, you don’t have to DJ no more. I’m telling you sir, the people will come. I hope you reconsider.

@DJ_Southern_Comfort 2 ай бұрын

I truly appreciate you, brother... I've gotten a ton of requests. I'll just say this, I have designed and built a one of completely portable and affordable console... I'm in the process of getting a patent. Stay tooned for a video coming soon. Thank you

@terranceburke5343 2 ай бұрын

@@DJ_Southern_Comfort, yes sir, your welcome. I’ll be waiting.

@wurlitzersk2541 2 ай бұрын

Great work. How heavy is the upper part without the base?

@DJ_Southern_Comfort 2 ай бұрын

With controller, 25lds

@primodj6173 2 ай бұрын

Impressive. Great Job!

@DJ_Southern_Comfort 2 ай бұрын

Thanks

@djnelspin684 2 ай бұрын

One of the best DIY consoles I’ve seen. Great job and thanks for sharing!

@DJ_Southern_Comfort 2 ай бұрын

Much appreciated 🙏

@terranceburke5343 2 ай бұрын

I’m looking for a stand for my Pioneer CRSS 12’s, with a Pioneer SM11 mixer. Are you available to make it? I will also need a cut out, for the same stand, for a Pioneer XDJ-XZ. I would attempt to make it, but that’s never been my forte. Let me know, thanks. I’m in South Carolina. @DJ_Southern_Comfort

@DJ_Southern_Comfort 2 ай бұрын

Howdy, I'm in South Carolina as we speak, visiting family in Great Falls. To be honest, I only build when I need something. I'm also booked solid for the rest of the year.

@terranceburke5343 2 ай бұрын

Howdy. Ok, no worries. Should you change your mind or become unbooked, you know where to find me. Thanks for responding

@terranceburke5343 2 ай бұрын

Oh, I forgot to say, money might not be an issue for you, but I can offer up to $1000 for my requested booth configurations. That’s how bad I would like it built.

@carloscancino7215 2 ай бұрын

WOULD YOU SELL YOUR FIRST CONSOLE?

@DJ_Southern_Comfort 2 ай бұрын

Howdy, unfortunately, I already sold it to... facebook.com/share/p/KVDjn76hbuTPRBtX/?mibextid=oFDknk

@MrDJBoombastic08 3 ай бұрын

Awesome 👏🏾👏🏾 what are the measurements for the top console please? What’s the height between the two plywood please? Did you have to trim the plastic to get it this height? Thank I bro!

@DJ_Southern_Comfort 3 ай бұрын

It's a 24 x 48 inch top x 4" thick. The translucent material was cut to fit the 4" thick center piece with a mitter saw. Thanks

@JS-wi9mw 3 ай бұрын

NEXT LEVEL!! Amazing stuff!

@DJ_Southern_Comfort 3 ай бұрын

Thank you

@djoscarmix 3 ай бұрын

hello buddy, i wrote you on instagram for some questions, thanks in advance

@DJ_Southern_Comfort 3 ай бұрын

I haven’t got it... hit me up here. DJ Southern Comfort: facebook.com/profile.php?id=100089339231712&mibextid=ZbWKwL

@djrroy1 3 ай бұрын

Hi firstly i love your videos, without doubt the most insightful ones online which is going a long way to help me build my stand, and love that you have shared the links to all the parts you have used. Question the tripod laptop stand, you mentioned this is modified. Could you share how, and what other parts you used? Did you still use the Speaker Mount Adapter with M20 Threading, Black? Any guidance is appreciated, thanks again for the great video!!

@DJ_Southern_Comfort 3 ай бұрын

Thanks for watching, I'll put something together and share soon. I just had eye surgery, so it might be a few days.

@djrroy1 3 ай бұрын

@@DJ_Southern_Comfort no problem at all. I hope you make a full recovery, thanks for the quick reply.

@DJ_Southern_Comfort 3 ай бұрын

@@djrroy1 I basically cut the top area of the tripod, about 3 inches below the knob. I then cut the Speaker pole to my desired length. Fortunate enough the tripod poles fits almost perfectly inside the speaker pole. I slid the laptop pole portion into the speaker pole and fastened with a couple of self-tapping black metal screws. You can use black tape to thicken the laptop pole to better fit (Snug) inside the speaker pole. I hope this is clear as mud. Laptop tray/tripod... www.amazon.com/gp/product/B0CD239NT1/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 11” Speaker Pole - www.amazon.com/gp/product/B0BXSB6ZPH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Speaker pole baseplate - www.amazon.com/gp/product/B00FKY86V6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

@djrroy1 3 ай бұрын

@@DJ_Southern_Comfort amazing thanks mate!

@TheHoovman81 4 ай бұрын

SoCo put your logo on your case that way it is out there even more! You deserve it HOOOOOOAAAAAAAAHHHHHHHH!!!!!

@DJ_Southern_Comfort 4 ай бұрын

You are absolutely right! Thanks, amigo.

@imaniinternational7853 4 ай бұрын

Nice clean job! What did you use for your laptop stands?

@DJ_Southern_Comfort 4 ай бұрын

I found a surface speaker pole mount on Amazon and a 16" screw in speaker pole. I cut it down to my preferred height and fabricated/ adapted the tray of a laptop trypod.