Thanks

What kind of oil does it use??? Some say 5w-30 and others say 10w-40....

Thank you brother. ❤

Thank you brother. ❤

Problem: Not maintained properly

❤

kzfaq.infoxrP0yee82PY?si=TJ2meFJXnCpPHdM7

The overflow tank has nothing to do with the level of coolant in the radiator and engine. Coolant should always be added to the cap, not the tank.

I bought a 2012 kia soul 1.6 with 160,000 miles on from Facebook marketplace. The seller cleared the check engine light but did tell me the check engine light comes on sometimes and didn't look into it. More than likely he did find out and put the car for sale. Before buying the kia soul, I test drove it for 30 minutes and nothing. Drove 2 hours to pick up the car. I went to valvoline instan oil change for them to look at the car and make sure everything was fine. No leaks or nothing broken under the car. So they said, car was in good condition so I bought the car, paid cash, 3,000 cash. It has AC, transmission shifts okay, no burning oil, car seems to be in good shape. But when I got home and had to move the car, the check engine light came on. Went to autozone to check the code. It was the catalytic converter. I added Cataclean twice and the check engine light still returns. My guess is the seller drove it too long with the catalytic converter clogged up that it is too late to clean it using cataclean. I'm going to replace the catalytic converter tomorrow but will keep the old one to see how bad it is and see if I can clean it. The kia soul is GDI engine, (Gets destroyed immediately) if driven with the check engine light. A new catalytic converter from kia is 1,790 dollars plus 3 hour installation, taxes and fees so close to 3,000 dollars. But like I said, I've tried to run cataclean twice and didn't work so I will get an aftermarket catalytic converter installed tomorrow but will keep the old one for inspection and possibly clean it as good as new as long as I'm able to desolve or breakdown all the carbon built up inside the honeycomb. The honeycomb is made put of titanium metal, but an aftermarket is made out of cheaper metal, more like chicken wire metal that's why they're cheaper. The only way to find out why the catalytic converter failed is by removing and doing a visual inspection. I don't notice anything else wrong with the car, no coolant leak, no white smoke, no black smoke, it drives okay but I do notice fuel economy is not so good, it is not that great so I believe engint is running rich. So for my case, it is too late to use this product and need to see what in what state my my catalytic converter is. That's why the car was for sale and only 3,000. The seller didn't tell me because it would be 2,000 dollars and I would probably not buy it. The seller was just lucky the check engine light didn't come on. Thanks for sharing this video

what do you do when the cap breaks in two pieces????

Dude this is the third video I've watched to show me how to do this and yours is the first one that I actually showed how easy they are to come off. Thanks!

So do you change it if it's too dark too?

Thank you Hard trouble taking off the old one Funny, when you are shown how, it becomes easy.

Never put high Octane fuel in lawnmowers! They require 87 unleded fuel!

Nice video. I want to remind to be careful with the fillning cap on the valvecover. Place it in a clean environment during the tap and filling up process to reduce the risk of dust or dirt entering inside the engine.

I have used this product several times on a 1995 Mitsubishi Eclipse 2.0L.It would clear the check engine light for a time but it would come back on. I decided to remove the cat and be done with it.

this is the most straightforward and helpful tutorial i’ve ever seen tysm

Shame..... mine's electric! LOL

Thank you!!

Cant see the level... low or high if oil is not black

Heya, I somehow couldn't find an answer so I wanted to ask here: how can I tell if I have a compatible filter? Should I only check to see if it fits snugly into the compartment?

I use nothing but cataclean...no gasoline, just cataclean. My car went from 120k miles on the odometer to 0 miles. Like new

In a word NO, additives are pure rip off bs

I obviously was doing it wrong. I just sprayed starting fluid onto the carb or onto the side of the intake and then will try to start it instead of starting it while spring that’s a new one that I have to try.

Thank you so much!! I knew there was a latch but couldn’t figure out where.

u did it backwards try starting fluid FIRST ! then u know the problem is fuel related immediately if it dznt wrk u then test spark ... 90+% of the mowers I've picked up are one of those 2 ....

Thanks you just saved my life, I just used a large chisel and screwdriver and length of metal strip but worked perfectly.

Thanks yes keep making them videos. You're smart, you sound kind, and very helpful. Thanks a lot.

I bought mine for $20 on Amazon and had them installed in 5 minutes do not pay people to do this it is a goddamn scam. Getting the the Clips off it's the only slightly difficult part if you don't have a thin enough tool. I'm sure you guys can find something. You don't need to do anything with the clips to put them back on just pop them on. If I was being an honest businessman, I would say that was about a $20 job at most, and even that is a bit high.

Seafom engine soak and using Valvoline Restore and protect will fix the oil consumption issue. Also adding a catch can. That car still has a lot of life in it.

Thanks for all your information

thanks very much for making this video :) have a great day Mountain Man Mo :)

Helping a friend, watched this istead of guessing. Clear, to the point. Underrated.

Thank you a lot!

How many oild

Thank you for posting this!

it wont work

Can it make issue work if you dont use enough ? I used chevron cat cleaner and then got p0420 code and now have shitty acceleration p0420 and p0301

What is the number. What pk

Big thank you, as I'm not really a car guy, and the manual that came with my car is in French only. I had no idea that was the rad fluid, as it looks completely different from my previous car's access. Was literally having heating issues, and mechanics were telling me rad fan, PCM, wiring, etc. (many different mechanics) with estimates ranging from $265 at the low point to "minimum $2000" as the high point. Turns out I just needed to put rad fluid in, so only $40, and watching this video lol

I’ve been trying to figure out what that container was thank you💀

That better not be by lawn mower at Florida

Thank you!!!! Great video, no bs just what I needed to make the job easy :)

If you try this and it works just understand that all you did was buy yourself some time. You aren’t actually “fixing” anything by doing this. Also know that if your motor has a lot of carbon buildup then using this could potentially make the clog worse. This definitely can help and I’ve seen it myself, but it’s short term. Your cat became clogged for a reason, so you need to figure out what caused that. But depending on your situation a bottle of this every six months might be preferable to replacing the cat.

Thanks for the video man. Saved me alot of money

Not showing me how to REPLACE with brand new....is there such a thing as putting it in backwards where it needs to be flipped?

I have used it twice and few others ... Still engine light comes back .. with Code P420 ... 🥴

How long before going to admissions should I do this to my car

Finally someone using the right color of coolant for the focus please do not use green or blue

Focus takes the orange my guy