My controller won’t even turn on now after taking off cover to clean bumpers. Anyone have this issue what should I do?

Thank you 🙏🏻

Jarive pas regardé avec l'écrit jai pas aimé

I have a very odd drift, It’s not sticky drift. It drifts after a few seconds of not touching the right stick. It’s a gradual drift perfectly downward (ads to the ground) down to the second ring. It will return to centre if I move the right stick. Please let me know if you know what this is

Thank you this fixed it for me was driving me crazy

I don't know if I should try this to fix my problem. I don't just have normal drift, for me its exponential and increases the longer its been since I last moved the stick, even if I set the deadzone to max the controller slowly increases the input until its off of the deadzone.

Very helpful video, fixed my drift with no problems, many thanks from the uk

congratulations on your first pc build.! Subscribed.

Thanks for the video. Replaced the controller piece causing the problem and works perfectly now!

Hi, I have a question. I replaced the sensors and put them in correctly. For the x-axis I have the problem, that if I move the stick a bit down, it directly goes into the down position and for up the same. Does anyone know, how to set the sensitivity, or how to solve the problem?

“I have done a ribbons cable before” when I tell you how hard my eye twitched when you said that….

Ñ

This was perfect! I was able to successfully fix my stick drift with my controller. Thank you so much! I figured I might have to solder the new joystick on but because of this video, I found out that wasn't needed!

My problem is the anolage has a bit of wiggle, for example in shooter games if i put my dead zone to .12 it is fine under that and it starts to drift, its like the anolage isnt snaping back to centre, its got a loose circle of of .12 deadzone even on the tighrest setting

Brilliant! Thank you! I was having one heck of a time getting this thing apart. Watching you, as I followed along, helped so much. I thought I was going to break the stick, trying to unscrew it. My $200 game controller works again!

Wish there's a magnetic joystick for Xbox elite. It just so wrong that you spend more than $200, but the joystick is still not last too long.

this good keyboard for 20 bucks on amazon \

how do u get the macro

Or buy a new one with cash and when you get in your car in the parking lot carefully open the box and swap the new one with the old and return it saying you bought the wrong one. I’ve never done this just heard about it…

the problem is i got to do this on a $200 controller...

Bro this works for any one wondering the side where the spring is raised goes facing up (towards you) the flat side goes down (facing away from you)

im buyin it

Can you connect it to your pc without a USB cable?

Does it work w/ console

I broke my controller trying this and it was a gift☹️

Did this ever go bad again? I just bought a custom one for $230 and I would love to be able to fix it in the future after its warrenty

It came with a screwdriver specifically for the joysticks.

11:30 70% isp alcohol or higher or you'll run the risk of frying the motherboards as the alcohol evaporates faster than water.... 70% isp is also 30% water 90% isp is 10% water You are using isp 91% which is 9% water!!!!! NOT ANY ALCOHOL WILL SUFFICE I LOST A CONSOLE ON THE SAME MISTAKE!!!!!!!!!

So cool！👏

Thanks for making this wonderful video!

Fixed my controller joystick problem awesome technique all the other videos sucked. My problem was with the joystick and it was grinding on something inside I moved it around a bit and now it works. Thank you.

you literally left out the one part I need help with. how did you get the stick cover off with a needlenose???? I'm trying to turn mine counter clockwise and it just gets tighter and the stick wont move as freely. when i turn it counter clockwise, it just spins and never loosens more. UNBELIEVABLY FRUSTRATING

Does yours make a holo echo noise when typing the keys?

I got the tk63 pro (bluetooth & wireless + arrow keys) for $20. It's a nice keyboard but the software isn't & you can't remap any of the function keys... like delete which is Fn+B. RGB looks really nice, but no OpenRGB support. Good video dude, keep going

One thing not mentioned, if you’re replacing right stick potentiometer, I recommend you guys open the whole thing. You won’t have enough room to pull it out otherwise. It’s super easy and the tools to do it are $10 Amazon. Don’t brute force the potentiometer out as there’s a piece of plastic holding the potentiometer in place that can break if you do. Unscrew the back cover off. From there all you have to do is unscrewed two pieces off the green board and lift gently. Unhook the triggers after. That should be enough room to get the potentiometer out you don’t have to completely disassemble the whole thing.

So I had to use needle nose pliers to get the left thumb stick off, when I reassembled everything, the left thumb stick catches on the controller if you move it all the way around. Any idea why that is?

It worked for me ! thanks a lot !

thats my problem rn and im waiting for my new potentiometer to be delivered now i know how to place it thank you so much this is very helpful

does it have usb dongle

thank you I might buy but it comes with a key cap puller right ?

So these little sensors with springs on it is what keeps the thumbsticks centre?

My thumbsticks are loose. They work with a lil stick drift but the 1st movement on them is loose. Like it has its own dead zone but still counts as movement. Any ideas

Dose this work on pc?

Hello, friend tell me potentiometer what is listed in the description is also suitable for xbox series and xbox one?

i have more subs

these come with gateron switches

Hope you channel goes far!

Pretty sure mine is just ruined.. Pulled the front plate off my series 2 to just do some cleaning and dusting. Fixed my RB whilst i was at it, good as new. Popped the sensors off my right stick to see if there was maybe a dog hair or something causing my drift. Gently dusted with a light brush, popped them back on. Now, it's just stuck permanently up, or down. If i pop the sensor and look inward, i can see what looks like copper wire poking out. The controller is probably toast ey?

Can you use the arrow keys without pressing the Fn key?

thanks for the video 👍