@Session73 I’m currently trying to do the front shock replacement on my super 73 S2. I’ve ran into the problem where the steering crown from my s2 won’t fit on the tubes of the bulany shock. Did you have this issue too? From your video it looks like yours fit with no size issue. Do you have an after market steering crown?
@UncleAndrewsAdventuresКүн бұрын
I could do without the weird acid house music bro lol I was baked and that shit was weirding me out.
@OregonCrowКүн бұрын
How deep in debt are you at this point?
@Assasins_coltonКүн бұрын
hey im 14 could i ride it on a sidewalk or road? i live in canada
@nicl26403 күн бұрын
I bought this because it reminded me of the electric version of the of the gas dirt bike version I had when I was a kid. But it died after a few months of very limited use and loses power even when it's fully charged so now it's dead in the water! Would have been great I love the design but razor is very low quality and I've had multiple electric scooters die from them. So I should have known better
@frankenstein31634 күн бұрын
Good job. ty for shearing. Did you need license plate and DMV registration ? I'm on the fence about making it street legal.
@frankenstein31634 күн бұрын
Love it. I'm in the proses of bike camping. I have a stock x160 and don't plan on going this crazy of a trail. I going to use fork bags, saddle bag's and handlebar bags. Most likely a very light wait back pack. Extras caring is; small laptop, small external monitor, I might buy a extra x160 battery and 300-600w solar panels to charge. And very small amount of fishing gear. Any thought's or pointers not in vid ? :) PS. that was a very creepy of a trail.
@willdonahue51835 күн бұрын
If I have been riding with broken spokes for awhile do you think getting new spokes will fix my wheel wobble
@somejackball5 күн бұрын
im about to order one, just wondering how do these things do in100+ degree heat? its still hot as hell in N Texas, wondering if it will be safe to operate one in this heat, without the batteries exploding
@garyallen39386 күн бұрын
Is it any good in the grass?
@JoeMama-qz9rz6 күн бұрын
Hey man, thx for the tutorials! Plus, I bought that bike from you haha
@driftfox6 күн бұрын
I've been Googling all over the Internet for the last half hour trying to figure out where the horn switch connects to. I bought my bike used, and it never had a horn button so I'm adding one. Thanks to your comment at 4:40, I'm good to go. Thanks, man!!
@OregonCrow7 күн бұрын
All that money into bikes and no air compressor?
@Callsign_Ronin7 күн бұрын
Where’s the license plate light?
@victorgomez12269 күн бұрын
bro thank you for telling us the size of the rotor bolts 5X10 mm
@Mrrog77199 күн бұрын
I think this would make it a class 2 in cali because class 2 doesn’t need pedals and it just needs to be 750w and 20mph
@jeromewaites53649 күн бұрын
Just Ben the fender down when you install it that’s what I did
@donkublon96269 күн бұрын
how you unlocked it sir ? start and break sequence was enough or you need to cute brown wire or maybe combination of both ?
@metaphorgucci617510 күн бұрын
you guys know where can i get 20x4.5/5 inner tube thats durable puncture proof like coating slime company that makes tubes thats better?
@breadtoast714610 күн бұрын
Do you have a bike lock you recommend for this and a method for locking it?
@nicolastischer834111 күн бұрын
That’s my dream bike❤
@stockey15 күн бұрын
Over $600 for that, a bit of a rip-off.
@andrewquane15 күн бұрын
I am looking into this bike. How fast does this model go
@Marco-xu1ss16 күн бұрын
Are you in Ogden?
@PeterSalob16 күн бұрын
I followed this video exactly and it worked perfectly. It was my first bike tire change by myself. Thank you Tim!!!
@craigwolfe222117 күн бұрын
Thanks for making this vid. God bless
@alanfletcher508018 күн бұрын
I can’t figure out how to get the handlebar post to lock in. Aligned the arrows and locked the clamp and it still swivels…not locked in. Thoughts?
@breadtoast714610 күн бұрын
You have to open the clamp to fold the handlebar down and then tighten the silver bolt in the middle with the hex key.
@kitcatmeeow5713 күн бұрын
I bought this same scooter. The instructions are a joke. I think you are talking about the silver cynlinder shaped mini tube that is attached to the end of the steering column. It has vertical ridges all the way around it. Right? Ok, I have already assembled mine. But I distinctly remember after I tried to close the steering column by lining up the white tape with the red vertical arrows, I tried many times to figure it out. Because it was not fully engaged into the bottom portion of the steering column. This something told me to take my hand an forced it ALL THE DOWN into the lower portion of the steering column & IT WORKED ! Then another mystery in the lower portion of the steering column. After I pushed this silver cylinder mini tube down into it's "cradle" (lower portion of the steering column) it was WOBBLY ! So I went online and watched videos of customers assembling this e-scooter. I saw a customer take one of the allen wrenches and stick it into the "hole" on top of silver cylinder & TIGHTEN IT UP. So I used one of the allen wrenches that came with this e-scooter to TIGHTEN IT UP & IT WORKED !!!! I was then able to LINE UP ALL THREE OF THE WHITE TAPE with RED ARROWS. Now that the red arrows are lined up look down at the front tire, reach down and position the front tire so that it is also lined up with the red arrows. Now see the BLACK "LOCK LEVER with the RED BUTTON" located on the steering column. Open and then close the "Lock Lever." This steering column allows you to FOLD DOWN THE STEERING COLUMN when you need to put it in a car or trunk of a car. Good luck ! 🫠
@jasonhawen327218 күн бұрын
Hi, Blur Boundaries.... is that a real company? I ordered an item using your discount code which hasn't been shipped. Emailed and messaged loads of times and not one reply.
@adamtyrell422718 күн бұрын
I've just purchased the razor rambler because people have a real positive attitude towards the bike 👍
@kickassmage19 күн бұрын
can this handle 300lb?
@kevincamoosa318019 күн бұрын
I bought the same tags from Amazon and they didn't work. Do you have to format them first?
@applechili284820 күн бұрын
Nice mods.
@OregonCrow23 күн бұрын
thats a big boy.
@aloofbit33823 күн бұрын
did you have any issue with roundness of scuker sucker tires? I got some today and they seem way out of round :(
@reynoldlambert25 күн бұрын
Hey brother, do you know if you can you use a RX controller on a ZX model?
@SNR87625 күн бұрын
is this mx3?
@selahtafari862527 күн бұрын
Anyone have issues with the throttle ?
@jeromewaites536427 күн бұрын
Is the battery removable if you don’t want to charge it in Bike?
@brotha182928 күн бұрын
Does it make the bike heavier if so would it be harder to wheelie it
@joshtuaАй бұрын
Is that Jordan river
@deannayoung5613Ай бұрын
How do you turn on the lights?
@timdanaherАй бұрын
Hi, do you know if the throttle can be moved to the left-hand side of the handlebar..?
@breadtoast714610 күн бұрын
No, it’s built into the handlebar.
@Hoops-Highlights1Ай бұрын
Pls figure out a way to unlock it
@michaelenglundАй бұрын
Howcome almost noone says what spring is in there. (38) 50, 60 or 38-60?
@jonasmeier417Ай бұрын
The problems as always, as also in many other cases: - Too cheap to be good - Uphill weakness - Bad Chinese battery cells that might start to burn and have a short life - Integrated battery pack, cannot be taken off - No spare parts - Buy cheap, then it lies around in the corner with an issue, waste! Wasted, a wasteful product. Zero sustainability.
@dustinwright2302Ай бұрын
How does it compare to your S73 S2? Do you still do videos with it?
@SESSIONS73Ай бұрын
It doesn't quite compare. The S2 has better range and power out of the box. Plus it has the unlocked mode. My last video before this one was on my Super73 S2.
@SESSIONS73Ай бұрын
My editing software has added these weird audio stutters in my last two videos. Anyone else have this issue with CapCut lately? Not worth trying to fix and re-upload, but I promise I know how to edit a video.
@idealtechniqueАй бұрын
I have a ZX and I bought these hydraulic brakes. unfortunately the rear pads are sitting slightly above rotor which causes the pads to wear unevenly. Is anyone else experiencing this issue?