thats amazing from a 50 hp. im having a hard time getting high stable speeds solo. what trim you run with the cleaver lowest hole didnt work for me on 18p cleaver didnt manage to save it. :P
@damianburbidge237113 күн бұрын
Trim 1 . What hull do you have ?
@劳永康Ай бұрын
How much pressure will he have with the TSR head?
@damianburbidge2371Ай бұрын
@@劳永康 about 165psi. It’s still a fresh build so it’ll only get more compression the more I use it
@劳永康Ай бұрын
11.5 20P Cleaverpropeller?
@codemang3635Ай бұрын
I can't believe you were able to scooch up front like that and actually save it. Made it look easy. Looks like a refined technique, from experience.
@RoggerLemesАй бұрын
I'm thinking about a propeller. How much diameter would your 20P have? I'm not sure whether to put it at 11, 11.5, maybe 12. What diameter would I have to place a LWP...
@damianburbidge2371Ай бұрын
@@RoggerLemes hey mate. This is a 11.5 diameter. All really depends on what kind of power your engine has. Most of the guys here in Australia are running either a 11 or 11.5 on these engines
@thomaslindroos1667Ай бұрын
What kind of ridiculous port timing are you running
@christiaanmoikahk9646Ай бұрын
That helmet is not going to help you when things go south. Get a helmet with a open chin to avoid the bucket effect
@damianburbidge2371Ай бұрын
@@christiaanmoikahk9646 good idea
@MX-fo2nuАй бұрын
Cool and risky
@damianburbidge2371Ай бұрын
@@MX-fo2nu that’s why I’m called captain risky 😂
@user-rm9yg7kn1b2 ай бұрын
Как лодка называется?
@damianburbidge23712 ай бұрын
по английски пожалуйста. я невозможно скопировать ваше сообщение для перевода
@PohuipliashemАй бұрын
@@damianburbidge2371 Could you provide information about the boat itself, as well as a link to the manufacturer's store for this boat?
@damianburbidge2371Ай бұрын
Thundercat
@user-rm9yg7kn1bАй бұрын
@@damianburbidge2371 ок, super.
@squidwould4911Ай бұрын
What prop are U guys running?
@jamesroberts16552 ай бұрын
Jesus.. you doing this shit in a balloon boat too!
@cottonsoxx16772 ай бұрын
Holy cow... Talk about balls to the wall. I wonder what he saw to his right and behind him that caused him to slow down so suddenly
@damianburbidge23712 ай бұрын
Hey mate. I used to run a hose from my engine to the side so I could monitor if the engine is pumping water or not and it had stopped 😅
@cottonsoxx16772 ай бұрын
@@damianburbidge2371 Ah yes... the all important telltale (not sure if that's what you guys call it over there?). Quite important when idling and at low throttle, but at when max throttle for so long, absolutely critical. Why used to though..? I've never seen it here, but it's a good idea.
@damianburbidge23712 ай бұрын
@@cottonsoxx1677 if you notice I’m Trying to keep the front down as much as possible and I need to concentrate on what’s going on in front of me. I can’t turn around and look at the engine at that speed. It’s just too dangerous. Think of it as another safety feature
@Checkmate8582 ай бұрын
Awesome. everytime I try to get to your speed, you even go faster. Best I got so far is 103-104 with the 50 tohatsu. Have ran a LOT of props now but I nver would have guessed a 21G would perform this good. Ran a 19P 11" cleaver from MTM which is great for top but the holeshot is wayyyy to slow to be competitive. How is the holeshot with this prop if I may ask? Will get my 17P 11" cleaver with quite some rake this week I hope.
@damianburbidge23712 ай бұрын
103-104 is still good though. There’s a lot of boats out there that haven’t even hit 100 km/hr. It’s very slow out of the hole. It should be a bit better once it has been modified but this run was mainly for data to see where it can be improved. Keep at it mate !
@Checkmate8582 ай бұрын
@@damianburbidge2371 you telling me you are running a stock engine here?
@damianburbidge23712 ай бұрын
@@Checkmate858 nooooo lol absolutely not. I was referring to modifying the cleaver.
@Checkmate8582 ай бұрын
@@damianburbidge2371 running 12.2+bar compression. Dual stage Reeds, ported, chokes gone, smaller injectors, no limiter etc and still no luck for me.
@damianburbidge23712 ай бұрын
@@Checkmate858 where are you located ?
@Jeremy-ts4xp2 ай бұрын
👀🔥🔥🔥
@user-uj4jx5cy7k2 ай бұрын
Cool! What does overgassing do?
@damianburbidge23712 ай бұрын
Hey mate, are you referring to how I am controlling the throttle ? If so then I do it to stop the bow from coming up too high and causing it to flip. It’s a new cleaver which needs more modifying so it can be more stable at high speeds.
@user-uj4jx5cy7k2 ай бұрын
@@damianburbidge2371 Yes, I meant working with gas on the tiller. I thought that these transitions to lower speeds, add traction, and then speed.
@damianburbidge2371Ай бұрын
@@user-uj4jx5cy7kyes and no. Sorry for the late reply. This boat is incredibly light and very sensitive to wind coming under the bow so the throttle needs adjusting as I drive.
@user-uj4jx5cy7kАй бұрын
@@damianburbidge2371 Thanks!
@user-uj4jx5cy7k2 ай бұрын
What is the pitch of the propeller? And how many blades?
@damianburbidge23712 ай бұрын
18” cleaver 3
@user-uj4jx5cy7k2 ай бұрын
@@damianburbidge2371 18 х 0,0254 m = 0,457 m, 113 000 m/hr : 60= 1883,33 m/min, 1883,33 m :0,457 m = 4121 propeller shaft revolutions per minute!!! What is the engine crankshaft speed in this case?😲
@damianburbidge23712 ай бұрын
@@user-uj4jx5cy7k not sure how you come up with that. My rpm tacho is around 7500 RPM mark.
@user-uj4jx5cy7k2 ай бұрын
@@damianburbidge2371 I did not come up with it, but calculated it mathematically, according to the speed and pitch of the screw. But you still have increased engine speed. How do you deal with this phenomenon? A special fuel mixture?
@user-uj4jx5cy7k2 ай бұрын
@@damianburbidge2371 English is not my native language, and I did not study it at school. There may be difficulties with translation.☺
@user-uj4jx5cy7k2 ай бұрын
What is the pitch of the propeller? And how many blades?
@damianburbidge23712 ай бұрын
22“ cleaver. 3 blades
@user-uj4jx5cy7k2 ай бұрын
@@damianburbidge2371 Then what is the engine crankshaft speed?
@RoggerLemesАй бұрын
@@damianburbidge2371 I'm thinking about a propeller. How much diameter would your 20P have?
@damianburbidge2371Ай бұрын
@@RoggerLemes sorry this one was a 22 and the diameter was 12
@nunomascarenhasribeiro3 ай бұрын
crazy shitzzz
@damianburbidge23713 ай бұрын
This is the slow video haha
@nunomascarenhasribeiro3 ай бұрын
@@damianburbidge2371 would love to ride one of this cats…nothing similar in Europe. I like Tohatsu engines very much. Best 2 strokes ever.
@damianburbidge23713 ай бұрын
@@nunomascarenhasribeiro they are a lot of fun
@nunomascarenhasribeiro3 ай бұрын
@@damianburbidge2371 do you know if they are in Europe somewhere to buy?
@russoley89954 ай бұрын
looks fake to me
@damianburbidge23714 ай бұрын
Always a hater. ✌️
@lesliefigueras21832 ай бұрын
A friend of mine has the record for top speed on a thundercat with a modified d2 50 he hit about 120 kph
@damianburbidge23712 ай бұрын
@@lesliefigueras2183 I have have gone faster. I uploaded a video recently
@lesliefigueras21832 ай бұрын
@@damianburbidge2371 my mate did with a co pilot
@damianburbidge23712 ай бұрын
@@lesliefigueras2183 love to see the video.
@Checkmate8584 ай бұрын
Awesome run/ great save. (Accidently deleted my other reaction sorry) Gonna up my engine some more and take it for a spin with the 20P 👍
@quelincutajar82419 ай бұрын
Wath is that rmp and speed app pls
@damianburbidge23712 ай бұрын
Sorry didn’t see this comment. It’s a Garmin virb camera.
@nathanl779511 ай бұрын
That ain't no snowmobile. 😅 Thunder cat.
@dodern Жыл бұрын
Can i ask what kind of prop ?
@damianburbidge23712 ай бұрын
20 “ cleaver.
@user-xr5gu1rq6f Жыл бұрын
Looks durable and sporty. Very presentable and ready to go!! The boat looks safe too
@suadhalilovic1501 Жыл бұрын
Get £u¢ked, no £u¢ken way lol
@jsjrspivey Жыл бұрын
That's so badass ! I got to get one
@ryankolt73412 жыл бұрын
what brand and pitch prop are you running ? what hole you have the trim rod in ? i just got my thudercat and trying to get it adjusted .
@14josetomas2 жыл бұрын
@@damianburbidge2371 this is great info. How much did you shave the head and what’s the bigger jet size? Boyesen o carson reeds? Appreciate your help!
@14josetomas2 жыл бұрын
@@damianburbidge2371 awesome thanks, 0.5mm right?
@reynierescandellhernandez79562 жыл бұрын
Amigo que tipo de balsa es y que motor ?
@damianburbidge23712 ай бұрын
50hp tohatsu Thundercat
@manuelmanuel10632 жыл бұрын
Krasse Nummer… super Leistungsgewicht. 👍
@leonardof38232 жыл бұрын
I have the same engine, but in an aluminum boat. What simple mod do you recommend to gain speed?
@damianburbidge23712 жыл бұрын
Bigger prop
@johnnymarx31582 жыл бұрын
What’s done to the motor an what prop are you using?