another clean video made! Would you recommend a wait time between each coat if I plan to do 2 coats for my Model Y? This is for exterior CC on both ppf and paint surface. Also, is 1 coat good enough for interior leathers?
@rrazzorr20002 сағат бұрын
What cable was used in this video?
@austins.67416 сағат бұрын
Definitely harder than it looks! Good video demo!
@DouglasJMark14 сағат бұрын
💯 First thing I thought too. Told our detailer he'll be busy as soon as they come to Toronto!
@grantsutton205517 сағат бұрын
I had a crack at tinting my model y lights but it came out horrible, is the trick to keep the lights and tint wet during application?
@season387Күн бұрын
Cyber truck must be a wrappers dream. Straight lines everywhere
@davidbrooks1118Күн бұрын
Really surprised you don’t check battery capacity fade and health???? I would’ve thought that’d be the first and #1 thing to check??? But I’m a noob so..
@Outrunner852 күн бұрын
Great info, thanks
@tesbros2 күн бұрын
You bet!
@tesbros2 күн бұрын
Should we make DIY window tint kits for the Cybertruck?
@chrissynv83222 күн бұрын
yes, make a kit, there are 2 million reservations on the cybertruck, youd be the first ones with a kit and with videos to learn. Im probably 1 millionth in line for the cybertruck and will be buying your wrap kit and window kit.
@mattkalin31392 күн бұрын
I would buy it!
@jordanandrew152 күн бұрын
Yeah!
@QATest4funКүн бұрын
@@chrissynv8322 You CAN'T be 1 millionth in line! I'M 1 millionth in line!
@nin_4_me58Күн бұрын
Yes!
@MegaTapdog2 күн бұрын
been trying to wrap my 65 year old body in gold wrap and still have wrinkles, but i’ll keep trying. Thanks for the video.
@tesbros2 күн бұрын
Good luck! Message us on Twitter or Instagram if you want to send photos of issues we may be able to help you with.
@k-notes59042 күн бұрын
For a Tesla stan, showed very little faith in the Cyber truck's build to not hit it loll
@exil3dlivecom3 күн бұрын
There's 3 studs. Why nylon washers on the 2 bottom only? What about the top?
@gust94643 күн бұрын
Mohs new ceramic coatings allows you to go in any direction, cross pattern doesn’t matter according to Gyeon. Mohs actually beads when it’s ready to wipe off. Pure and Mohs are close in comparison. Mohs is slicker and Pure might be better on darker cars but no slickness.
@gust94643 күн бұрын
Great video. You really went above and beyond that most people won’t do. Since they are not new wheels and have been on your car a while it makes sense. When they are new wheels you probably only need to do a full wash and prep then coating. ⚡️😎
@totallyhandydiy3 күн бұрын
I want to choose STEK , but I dont see any option
@tesbros3 күн бұрын
The colored ppf is on pre order but launching this coming week! We will have Stek available as well. Is there a specific color you have in mind?
@TeslaDiyMan3 күн бұрын
Not yet but mostly gloss black , will it be 1999 too
@tesbros3 күн бұрын
@@TeslaDiyMan colored ppf is significantly more expensive but I’d recommend the Avery Dennison Noir if you’re looking for gloss black. It will be much more affordable than the Stek version.
@mariusmeyer143 күн бұрын
Very interesting. I'm wondering what a Cybertruck would look like with matte black at the bottom (up to the hipline) and then gloss black above that. It then would look even better if the windows are tinted. So, the trunk top is gloss and the trunk front is matte black. The Tailgate will be matte black. Just wondering if you would have to do something special where the two colours meet like a mirror tape underneath?
@tesbros3 күн бұрын
Nice design concept! Where one PPF color ends and the next begins, you will have to seam it there. So it would be right against the other and hardly noticeable if it's on a body line and precision cut to fit
@mariusmeyer143 күн бұрын
@@tesbros I thought about the cutting. With the install one can overlap the two colours at the hipline and then cut through both to ensure the perfect fit.
@ulugbekabduvaliev77563 күн бұрын
What we supposed to see here?, invisibility?. Why did you choose a silver.
@tesbros3 күн бұрын
In part 2, we wrapped the bumper in black to make it easier to see - kzfaq.info/get/bejne/pbuTZptmt9bQmJs.html
@user-ow2sw3hq6e4 күн бұрын
Such an amazing video, thank you!
@tesbros3 күн бұрын
Glad you enjoyed it!
@shawncampbell31914 күн бұрын
The best video on PPF removal that I have seen. Thank you for the great information.
@tesbros3 күн бұрын
Glad it was helpful!
@jameskhoo84074 күн бұрын
Hi, do they make precut 3m 2.0 2024 model 3 ppt? Can you also make some video to install the fender, doors, and trunks? Thanks.
@morpheusgates86644 күн бұрын
I'm really surprised that you didn't key the bumper?
@mathieuraymond66184 күн бұрын
How does it hold after a year? 😮
@exil3dlivecom4 күн бұрын
What year is that tesla? I bought a hitch but not sure if i should put the crash bar back. Tesla doesnt put it back when they install their OEM hitch.
@tesbros3 күн бұрын
This is a 2021
@exil3dlivecom4 күн бұрын
Are you supposed to put back the crash bar? Seen other videos where that isnt putback whrn you put a actermarket hitch.
@tesbros3 күн бұрын
For the EcoHitch, yes you put the crash bar back
@krimstix4 күн бұрын
Can't wait to get a Tesla so that I can buy this sticker.
@family4ev3r5 күн бұрын
with wall charger u installes how long it charge the battery to reach 80%?
@1AdamDaily5 күн бұрын
Like the Miami Blue, but ❤ the Light Stone
@tesbros3 күн бұрын
Both great options!
@JunliuTPU3177FILM5 күн бұрын
Car TPU transparent car coat car color change film Chinese manufacturers Wechat
@RoseannAbell5 күн бұрын
😲😲😲 wow
@caliandkira5 күн бұрын
Woof! On your website I see the Avery PPF only? Woof!
@tesbros5 күн бұрын
We only have Avery for our matte and gloss, but there are a few more brands you can choose from for color ppf
@KevinCasipillai5 күн бұрын
Really great video. I just installed it on TM3 LR 2020, everything seemed to work great to begin with, except i couldnt open and close the trunk from the app. But Now i Can’t even open the trunk from either the screen or the app. I Can only open and close using the button.
@tesbros3 күн бұрын
Here are a few troubleshooting steps you can try: - Do a soft reset by holding down the steering wheel scroll buttons for 10 seconds. The screen should go black and then reboot. - Redownload the Tesla app. - Make sure all the wiring connections are secure and properly connected. Sometimes a loose connection can cause intermittent issues. Hopefully one of these will help! Usually issues like that are a glitch that can be solved by rebooting or updating something.
@AlanTrades5 күн бұрын
But why pay 3k for white leather if you cant see it? Also, it would reduce the seat heater effieciency
@tesbros3 күн бұрын
The seat heaters still work great with the covers on
@justinbrown36115 күн бұрын
Does the technique or ease of removal matter whether the PPF has been on for 10 months or 10 years?
@tesbros5 күн бұрын
It’ll be harder to remove the longer it’s been on the car. You can use this same technique though. I suggest leaving it out in the sun for a while before starting. If you’re working with 10 year old ppf, and you have access to a steamer, that wouldn’t hurt to use either. Might move things along faster
@jasonsalus38166 күн бұрын
Ok if you had to choose only one ppf brand which would you choose and why?
@3psilonG5 күн бұрын
UPPF, they offer clear and color PPF. UPPF is also manufactured in house.
@LaurenMadisonA5 күн бұрын
Second UPPF! 40+ color options made with high grade TPU, self-healing, and hydrophobic.
@tesbros3 күн бұрын
That's a tough one! Personally, I love working with Avery Dennison films because they are beginner-friendly and perfect for our DIY kits. They offer great quality and are forgiving, making them easy to handle. I also enjoy using STEK films and, to be honest, I was quite impressed with IVIOS in this video. It's hard to choose when there are so many good ones out there and the film technology just keeps getting better and better!
@jasonokane4966 күн бұрын
STFU bro. Ur not a sparky. Hack
@amerb3136 күн бұрын
A bro what percent is your tints
@tesbros6 күн бұрын
20% VLT
@laurencel.79806 күн бұрын
maybe it's my eyes... but it looks like the films don't cover the forward door edges? is it cut short, or does it wrap all edges?
@tesbros6 күн бұрын
During the filming of the shoot, it was slightly short but since then, we edited our patterns. So, yes the color PPF DIY kits that we offer wrap around all edges. Good catch!
@tesbros6 күн бұрын
DIY Cybertruck PPF Kits are OUT NOW: tesbros.com/products/diy-protection-ppf-kit-for-cybertruck
@exil3dlivecom6 күн бұрын
How thick is this sheet?
@tesbros3 күн бұрын
This is Avery Supreme Defense - 6.5 mil thick
@discreetbtmxxx26396 күн бұрын
Pros and Cons of rebuilt title Tesla ?
@FAZZYUNBOXING7866 күн бұрын
do y'all sell colored PPF for the CT?
@tesbros6 күн бұрын
Yes, it's currently available for pre-order: tesbros.com/products/diy-protection-ppf-kit-for-cybertruck
@dpz1985dp7 күн бұрын
Is there anything else i can use if i dont own a squeegee?
@tesbros6 күн бұрын
You could try a plastic card like a credit card. To avoid scratching the vinyl, wrap the card in a soft cloth or use a piece of felt. You can get some squeegees off Amazon for pretty cheap though!
@TheOMAR6177 күн бұрын
CABRON-on-fiber😂
@heatherhas37 күн бұрын
Thank you for this! Had to remove my ppf after just a year for a hood repair. Worked great! Also suggest doing in warm sunshine along with the hot towel.
@tesbros7 күн бұрын
Glad it worked out!
@AnameSomeonesDadSurname7 күн бұрын
Thank God for KZfaq for the cybertruck would have absolutely no use in the real world
@michaelhsu3487 күн бұрын
Thanks for sharing! I bought satin black pillar delete from you Is 3m 2080 black satin the right matching wrap? They sell pieces in 5 ft x 1 ft. How large of a piece do you think is needed for both mirrors?
@tesbros7 күн бұрын
Yes, that’s a match! And that should be enough for both mirrors. You could order a couple of those if you want extra in case of errors or for practice, but one should be fine
@bhikupatel81177 күн бұрын
Can you use this on glass? How many bottles of this would you need to do entire cybertruck including windshield, windows fender trims and tonneau cover?
@tesbros7 күн бұрын
You can use this on the trims and tonneau cover, but not on the windows/glass. Also, keep in mind that you want to put this over a vinyl or ppf wrapped Cybertruck. It doesn’t work directly on the stainless steel. You’ll need one bottle though. For the windows, I recommend QuickView - kzfaq.info/get/bejne/q7R8m71ns7jQl30.htmlsi=AfqL8m-9WrcKAcCh
@bhikupatel81177 күн бұрын
@@tesbros Oh yes I'll be applying this over ppf. Thanks for your insight!
@tesbros7 күн бұрын
@@bhikupatel8117 anytime!
@jpanic28 күн бұрын
for your Panoramic Top - you can get a CLEAR TINT, for example from Llumar they have their AIR80 product which blocks about 86% of the UV Rays (which creates the heat in the car).. so the cabin stay cooler without a shade. - since there are no spares, you should carry something along the lines of "Fix A Flat" so just in case you get a puncture, you can drive it to the nearest shop to get it fixed.