Hi - what specs are you running and any visual enhancers? Your FPS and visuals are stunning for TSC

Whats the best audio mode settings and volume by using the built in microphone? Theres always a noticeable hiss in the back ground particularly in a quiet area. It picks up road noise really easily in 5.1 channels, much louder than the road noise actually is.

Great track plan and nicely executed. The single slip makes it all work. I think your reversing points on the through lanes should be the other way round as you would not drive onto a priority track going the wrong way but would stop on your track and "reverse" onto the other track so that you could keep going in the intended direction.

Coming to this after "Cowerbridge Junction: A Closer Look" it all starts to make sense.

My first introduction to Cowerbridge Junction. Looks good. Would have liked to have seen a slow pan around the layout as you explained what was going on rather than cutting between scenes as i got lost as to where on the layout we were. As a first introduction I would have liked a schematic so I'm off to see what other videos you have.

The features of your layout are amazing. I like the end of an era branchline junction feel to the scenics. But even more impressive is the thought gone into how to make the layout work for more than one train per running line. One Question, Are the cassettes able to be used from either end ? With the 'hand of god' you can turn the cassette instead of reversing the train out. When it comes to videoing I suggest you use a sheet backdrop, a simple screen or lace curtain to partly hide things like the cassette area and over behind the town scene. Also the level of your platforms looks high and could be cut down by two brick rows... There are a more details that could enhance the effect you are looking for when filming or presenting the layout. A girder bridge over the "tunnel" under the town with a skewer fence on top stop the kids from falling onto the tracks. Some additional detail to Percy's Tunnel ? "Skewer Fence", Wooden skewer cut to length with mesh clear glued to the poles. "Girder", strip of plasticard for the flat surface. Cut thin strips to make top, bottom and joining plates. "Inner Tunnel molds" Use paper brick over paper to make a tunnel lining and mold to shape. (remember to have the brick rows running from one side of the tunnel to the other) In "Percy's tunnel" make the lining as deep as possible. Potentially as deep as one coach. Then paint a dark back scene behind the track where the trains curve into the fiddle yard. You may also want to include disused postal collection points at your station on both platforms. The older type where fixed near the end of the platforms. It could be a feature at the station end of platform 2-3 giving access to both the main and the branchline. The collection point would be on the approach side of the main line on the station building side. Access to platform 2-3 should be tunnelled walkway. Dig a small hole in each platform near the end of the platform. Fence, cover and paint plasticard straight sides with curved roof. The disused Ash pit/Inspection pit is a nice touch outside the shed. This is a very useable, clever layout that looks good.

I've had my ax53 for 3 years now and it's really good for recording thunderstorms and taking good garden photos of flowers up close. I've also shot many country show with it aswell. Do enjoy it.

Enjoyed your description of your layout which I found very interesting. I would be interesting in you explaining how you have your cameras hooked up, I saw you have one attached to a wooden post. If I may, the volume of your audio was a bit low ??? Thanks and regards Charlie

We are new to your channel. It looks like you have a great layout build going. The rubber ducky in the tunnel was cute. -John and David

A rough old sea especially as she goes astern into waves. Microphone must have been next to funnels when she left pier!

i think its quite a decent route, it does what it says on the tin, and you get what you pay for. what do you expect? the entire west of england?

I just tested its speed on trainz simulator 3 andriod it crossed 500

18:00 It's a core TS thing, happens with any loco and any DLC, just with different sounds.

Disapointed to not see a sponsor spot for emma blackery. has she dropped you as a sponsor? hahaha These engines look pretty good, might take a look myself when I get the chance

what route is this TIA.

I have no idea why the game sounds randomly disapeard midway through.

It sort of sounds like chitty chitty bang bang. 😇

Totally forgot to add the "brief history section" oops.

Perhaps the estate house should maybe have a private 2ft gauge line, using the Wayside Works 60cm gauge stuff like the Robin and the Decauville

So sweet nice vidieo💕💕💕💕

Minbloing nice vidieo💕💕💕💕

Amazing nice💕💕💕💕

Awsame nice 💕💕💕💕

Wow nice lovely channel💕💕💕💕💕

If you didn't know, Golden Age Developments released a GWR texture patch, bringing a set colour for all the liveries, instead of the mismatched GWR and BR liveries

I'm assuming that unlike other Meshtools products, this one doesn't offer a simple mode? I want this engine but I'm a bit of a noob driver basically lol

You could call this, the beauty of ilfracombe! X

𝖆𝖓𝖟𝖆𝖟𝖎𝖓𝖋𝖌 𝖔𝖜𝖔

One day i will learn to get my microphone audio to the correct level XD

Layout looks great. Quick question-how did you attach the peco bridge sides onto your structure. I am just about to install 4 adjoining bridge pieces and im trying to figure out the best way and your layout is the first ive seen with a similar setup to mine. Any assistance would be helpful.

So you’ll use super human (tell us) on everything but bales? That doesn’t make sense. Pick one. Interested to see where you go with this.

Loving the videos

I would, cut the grass you have, great for horses! I was wondering where the bong nioise was! Truck needs too much work I think.

I’d sell the barn. It isn’t usable in its state. The house will do until you have the funds to upgrade. I’d sell both silage and hay bales. Your ways off from animals I’d think anyways and getting money should be your primary goal right. Good job on your first video. I hope to get into this one day myself.

10:27 Shrek's hut :P

This was meant to be a 1440p video but youtube sucks so its at 1080p cos they cant workout how to process the HD version of a video 12 HOURS AFTER UPLOAD.

Glad to see even the scaffolding was outside to see the parade :)

Yes Malmesbury is a real place and the train line was taken away along time ago. Where the track ends is where the station would of been. The town is a whole lot bigger. The name of where your looking at is called station yard

I don't do Twitter!

Pᵣₒmₒˢᵐ

Great video, like the track layout. Are you planning on adding a station near to where the shed is?

Nice loco, do like the nse livery 🙂👍🏻

Wow enjoyed your latest video thanks for sharing.

Saw your post on Facebook so subscribed 👍🏻

What's the route?

frankly am not impressed with it theres so many problems with it and sss cant take criticism and opinions of people would of preferred if bmg did it mean look at bmg locos they have a lot of features these dont have

MAN we were dropping frames at the end there. Sorry about that guys, I will look into the issue there. Which im 99% sure was related to the fact that i was using Monitor Capture rather than Game Capture as to not crash Railworks. I will try to fix it before the next stream.

What I don't understand with the new 2MT is the valve gear animation. The radius rod motion should be governed mainly by the rocking expansion link, but it seems to move independently of the link entirely. The rod moves back and forth, yes, but by what means? I don't know, but something doesn't seem right. Do you see it?

Someone via SSS' post on Facebook responded to someone else who pointed that same issue out, the person who responded said it was to "represent the build up of dirt"

I think the problem is because you have the train brakes completely released. You should set them into the "running" position and that might do the trick