Thank you , we were stuck as mechanics for a customer after changing pads and sensor

Grazie mille ❤❤❤

Alright mate I have a Astra J 2010 1.7 i have had a few failed regens due to switching off engine as it tends to choose to regen once ive pulled into work, its been driving fine & i have no warning lights, & cant find any codes with my fox scanner. I was driving down the motorway the other day then without warning it just lost all power, & light coloured smoke started pouring out the exhaust its lost power in the revs but if hold it slowly builds up but still no power & pouring out smoke. Any ideas of what this could be? Is it dpf related? Also had a mild oil leak coming from the hose that connects to throttle body. I often check oil dip stick & it seemed quite high so i didnt add anymore. Thanks. I havent taken garage i got it towed home & has since run out of mot & insurance but wouldnt drive there anyway so its sorn.

Wow, very informative. Just did the test on my i3, because it occasionally complains that it cannot talk to the center left rear sensor. But the sensors all pulse. Something else is up, intemittend "Auto PDC" failures.

hi great video. Just wondering if anyone can help answer the following question. I drive RRS L494 2017 3.0 Diesel (v6), and I was wondering if I'm I can upgrade the speedo instrument cluster to use the version of the L494 2019-2022?? Will all the features work? will I need to get the new unit coded in order for it to work on my car? or will it be a straight swap?? Thanks in advance

How long did you leave it the run for

Bleach???

Hi this scanner Autel MaxiSys ULTRA Lite or ultra

All of sudden my Superb starts showing this Indicator light.. I'm too much far from SKODA service center.

What has to be done?

Thank you so much for your patient explanation. I just finished the installation, and it saved me $2000!

Tried this dosent work

Hello, can you write me autel model you using, Thanks.

Nice one 👏👌 So simple when someone shows you how! Cheers 👍

What’s up bruv . Nash here one of your KZfaq subscribers ,we previously chat before on one of your post .My car is an Audi A5 sportsback 2017 tdi .I had a fault code of 2463 particles filter and engine management light on .Done everything you’ve showed on KZfaq.Changing the two dpf pressure sensor,spray TFR/bleach into ad blue and dpf sensor pipe ,get rid of all the crap through exhaust.Bought one of that Launch ,for be audi ,but didn’t let me do dpf regeneration,showing not available on this car ,even though I fully updated it .Send it back and get a new Otofix D1 lite scanner ,but it has got dpf regeneration,but not dpf replacement or soot adaptation.The car won’t let me do a force regen and obd is still thinking the soot mass is above .I need your expertise to reset it for me with your more advanced scanner and do the regen .I live near Heathrow airport ,Ashford ,let me know where you’re based ,I can travel to you if you ain’t too far .Please do let me know how much and when we could meet .Thanks .

I was coding with Carly and the sunroof got blocked

Perfect explanation with proper uncut demonstration. Thank you🙌🏽😁

I have changed out my fuses yet (secondary) cigarette lighter still not working. Cleaned it out of debris and dirt. Any advice on where to get replacement part that fits 2008 model?

Great video friend, can you also buy used second hand injectors and then code them in? or do they have to be new injectors?

Where abouts are you based.

hey man i have a bmw x6m 2015 code D3543A the steering is heavy and it has safety things such as pedistrian alert and traction have tried driving nothing tried to reset the battry nothing could you make a video on that thanks

i have a bmw x6m 2015 code D3543A the steering is heavy and it has safety things such as pedistrian alert and traction have tried driving nothing tried to reset the battry nothing could you make a video on that

hi whats the contact no please

my 2023 cla facelift giving this prompt each 1 week. Do you think is it normal ? or any problem ?

What is the model of the autel

F10 2014 no jet water / no high beam / steering light ON / stability control warning on. It’s happened after I fix the speed sensor and I overthought and replaced the spring coil. Any suggestion

So I've had no lights come on the dash, flashes up service vehicle soon and then come up with reduced engine power. Would you say this could be the DPF?

How much to clean my golf mk6

how many liters should i use? and the bleach is combined with water?

just take the neg off your battery for 20 mins and see if it comes back mines went away.. i had a bad battery with low voltage

Cigar lighter fuse location please?

Perfect sorted it out after weeks of it on

On mi Suzuki swace not working :)))

Never thought of that ,suppose putting water into dpf just steam cleans it out

It’s odd too bc when I went under live date for the pressure sensor before it showed *** literally 3 dots. After replacing the sensor now it says NA. can you shine any light on that situation?

Hey that’s good info man. Glad you shared. Dealing with 1 now sensor was bad but still wouldn’t work. It’s odd that autel put that under heater AC performance test. I heard some say the sensor is programmed which makes no sense to me. It just measures pressure what’s the point of program.. I’m guessing when you hit the “test” is the “ program” I have a autel try that on Monday. Appreciate the video brother

Hi can anyone help , I have exact same problem. My mate plugged in his obd but because ignition won’t come on it was no use. Is this device only way to fix. I fitted EMV & the led on it didn’t even light up. New battery just fitted to car & the key has been checked with new battery also

Can you code in apple car play in the sprinter with this tool?

Excellent video!!

Hi mate do you have whatsapp i want to ask you about my problem

Does it give noise, because someone brought car to me and said there was massive noise but when I checked there was no noise but when car turns off it’s not smooth off but scanner show flap motor is gone with eml

can i do this programming for a steering wheel airbag that’s dual stage that i replaced with a single stage airbag ?

I have the seam problem

You Are my hero, Got a new Cat/dpf filter and got this error code, after resetting the values it was gone :)

Does anyone know how to keep that front lighter on when the engine is off? Cheers

I heard that it's not a good idea to do this stationary, because the temperature in that filter is very high and it hasn't got a proper cooling while not driving.

Hello I need your help I have an id4 She had a small accident airbag triggered high voltage cut off if I change the Pirofu sible is this enough where I have to change all the boxes as in your video thank you

Hi, thanks for the great video. I need to replace my sliding door central locking mechanism on my caddy. Where did you purchase the mechanism from?.

Hey buddy if you read this please reply so I can ask you a question please.

Can you not do this without the computer?