RedHotFiat

Пікірлер

@jagboy69 21 күн бұрын

Might have to try this one! Thanks.

@waynehendricks8187 2 ай бұрын

Very good except using a shovel to remove the loose dirt seems dangerous being close to electrical lines.

@RedHotFiat 2 ай бұрын

All the electrical lines are in conduit and I am using a flat shovel to scoop the water and mud out. If there was direct burial cable it would be a little more risky and I would probably use the shop vacuum instead of the shovel.

@jjefferyworboys8138 5 ай бұрын

Lovely old car, even with its larger chromed wheels.

@Z-Ack 5 ай бұрын

How are you not getting a face full every so often? I even drift off for a half a second then its hitting the stuff wrong and sending dirt soul in my face..

@catherinex7581 6 ай бұрын

Et....comment on le réalise ??????

@vladkuts 6 ай бұрын

Tanks buddy! :)

@mikewilson8813 7 ай бұрын

Brilliant idea 🤔

@alexeydemin1570 7 ай бұрын

😊👍👍👍

@thisburittoisfilling 9 ай бұрын

That sucks, but chamfer that edge and move on. Life is too short to worry about such a small problem. 🤙

@007Strings007 9 ай бұрын

I have heard of some people using a shop vacuum to suck the mud out of the hole.

@kylerodgers2045 4 ай бұрын

I've heard this as well. I'm on the verge of buying one for this sole purpose for the rocky soil up here in Massachussetts, but I have also heard it will ruin your shopvac quick if its real muddy.

@RedHotFiat 2 ай бұрын

I do this as well. It's hard with all the water and works better with loose soil.

@kathleenmateo5351 9 ай бұрын

Great video! Hope you post the post when installed.

@privatename2648 10 ай бұрын

I'd be mad, too. Spilling my nectar and now my feathers are going to stick and that freaking hurts!

@JesterTop 10 ай бұрын

😂 that is MY Tiger! I just bought it a few weeks ago!

@RedHotFiat 10 ай бұрын

That's great! I would really like to see a walk-around and video of the interior. Any chance you could upload a video?

@JesterTop 10 ай бұрын

@@RedHotFiat I will totally upload one eventually. I bought it and have been camping out in it for the last few weeks taking my time getting back home. So it's currently kinda a mess. But once I get it home and cleaned up a bit I'll definitely upload some videos. It's in surprisingly good shape for being from 1988. It has a dinette layout. Others Ive seen have a L shaped couch along the passenger and back side. And this one doesn't have a sh*tter/shower in the back driver area so no black tank. (Id rather have storage and just use a camp toilet anyway). It's really a brilliant layout. I lived in just a normal astro van for a couple years and it's amazing how much more room just 6" on the sides and 14" on the back makes when it's a box. But yeah I'll let you know when I get around to posting a video.

@Curious-Lass Жыл бұрын

Excellent idea! I will try this if I get any hummers staying this winter! Thank you for sharing!❤

@WalkingYoshi Жыл бұрын

Hello 🙋‍♂ Greetings from Japan to you🗾 This is a nice scrap use of an old LED light thanks for the great idea video 😊🙇👉🔔

@RedHotFiat Жыл бұрын

Does not work with LED as they do not generate enough heat. This is for old style incandescent light to warm the food for the hummingbirds.

@ThunderboltSiren1003 Жыл бұрын

Awesome!

@compdoc3055 Жыл бұрын

I am really satisfied by slow motion keep putting that

@bloodworldnight738 2 жыл бұрын

A masterpiece !

@jeffw8057 2 жыл бұрын

What prevents the box knife blade from damaging the insulation on the wires inside the Romex? Instead, I slice the bottom inch and then peal the Romex back and snip it off to the desired length. I then trim off the initial inch to assure any damage to the inside wires is removed.

@MikeJohnson-ut7lx 2 жыл бұрын

Absolutely not.

@jcnme 2 жыл бұрын

Excellent Video Brother ! Thank you for the perfect tip !

@AlecKristi 2 жыл бұрын

You don't have to have your hands cupping the wire when you cut it... you can just hold it by the end. Much easier than trying to figure out how to bend it and then balance the cut...

@fomoco300k 2 жыл бұрын

The safety advice alone is worth the price of admission! I’ve looked for one of those sheathing slicers like you showed for several years without finding one. To be fair, it’s probably available online and I’ve hoped to find one locally. Maybe I should check Amazon.

@RedHotFiat 2 жыл бұрын

Yep! Mine is Ideal Brand but Amazon has the Gardner-Bender CR-100. Same thing.

@fomoco300k 2 жыл бұрын

@@RedHotFiat I’ll check that out and get one added to my cart. It’ll go nicely with the Klein automatic strippers and Knipex pliers I’ve had my eye on. Thanks for the info!

@hondaguy9153 2 жыл бұрын

Good God, just get a pair of Romex strippers!

@bitTorrenter 2 жыл бұрын

When I was training as an apprentice electrician many years ago, in the UK, we were told not to use utility knives to the risks involved with using them. However, I found them essential when stripping the outer sheath of armoured cable. Your Romex cable looks similar to our twin and earth cable, flat PVC jacket etc. To strip it we'd knick the end and pinch the CPC (Earthing conductor with our side cutters and pull down stripping the outer jacket.

@surferdude642 2 жыл бұрын

Another technique when using a box cutter is to cut with light pressure and then at the last inch or so, press harder to cut through the sheathing. Then peel away easily. Obviously, keep fingers away from being directly under the blade at all times.

@tonyhewett3729 2 жыл бұрын

Try a knipex 98 55 dismantling knife and start it at the open end.

@burginbrothers4392 2 жыл бұрын

Sylvester got it right…

@burginbrothers4392 2 жыл бұрын

After cutting a couple inch of the sheathing on the end. Pull the wires and sheathing away from each other. Leave an inch of sheathing in box and cut off sheathing…

@5_fun_facts123 2 жыл бұрын

Hack job.

@alldayjack4830 2 жыл бұрын

I strip the romex before I put it in the box

@TheCasualSirenEnthusiast 2 жыл бұрын

What's the serial

@RedHotFiat 2 жыл бұрын

I don't have it any more. I sold it over 10 years ago.

@johnscott2076 2 жыл бұрын

Pinch the razor blade between your thumb and finger, leaving just the very tip to cut into romex jacket and you can’t get cut

@normferguson2769 2 жыл бұрын

I just brace the cable against the stud to cut it. I am very aware of not putting my hand in harms way. You still need to get inside the box to cut the cover 1/4” inside the box, as per Code.

@lesdickinson3785 2 жыл бұрын

sure would be an idiot to cut his own hand like that it doesn't take very much pressure to cut the jacket on that wire

@xbubblehead 2 жыл бұрын

One constant on these KZfaq videos is that one video will tell you NEVER DO THIS! And the next video says that's the best way to do it.

@huejanus5505 2 жыл бұрын

I do about a 1 inch slice in the outer sheathing, grab the ground wire with pliers, pull and split the sheathing.

@shauns6936 2 жыл бұрын

Do not use a razor knife I got severely injured from it I got multiple stitches from it. A word of warning for everyone

@chrisavcs 2 жыл бұрын

When I was new, tried all the special tools to strip romex. For the 15 years after that used a razor knife.

@eugeneenright9212 2 жыл бұрын

Dont teach. That's all wrong, go by a pair of romex stripers

@virginialeite4653 2 жыл бұрын

😄💖

@samsworld5863 2 жыл бұрын

🥰😍👍

@samsworld5863 2 жыл бұрын

💖💖💞👌

@cristianodreyerwoodart3158 2 жыл бұрын

Muito legal será que posso fazer um

@jeepsblackpowderandlights4305 2 жыл бұрын

I just cut the wire like 1/4 of a inch down, then take two pliers, grab two wires and pull the wires apart.. they pull out of the insulation very easily this way, i can make it any length i want.. easy.. i dont like how people cut it all the way down like you do.. great way to slice the actual wires themselves

@BruceLeanTrades 2 жыл бұрын

make more electrical videos

@alejandrorodriguez2380 2 жыл бұрын

Hermosa !

@cag9284 2 жыл бұрын

Side cuters to snipe vertical up at the end, then find the ground/earth.. pull up towards the cable ... and it strips the outer sheath..

@davefoc 2 жыл бұрын

I do something similar but your approach might be better. I slice the last half inch or so open with a razor knife and then pull the ground wire up to split the sheathing. I used to do the split it along the length approach, but even with that there is no need to cut completely through the sheath. Just score the sheathing and it use the ground wire to split the sheathing along the line that was scored in it.

@ALUXJAMBECHANNEL181079 2 жыл бұрын

A good simulation

Ең жақсы KZfaq

Пікірлер