how is it holding up after a couple years?

OMG I commented earlier and when I came across your videos. I have been trying for 2 years everything under the freaking son to get rid of these things. The damage that they have done. 220 year old trees several 20 plus year old bushes and now they're going after my big tree in the front the flowering tree. I watched several of your videos I watched what you did and I said you know what today will be the day. So first thing this morning I went out there and I smashed down all the tunnels and I started flooding them out and jumped in the pool went and got me something to eat come back and sure enough there was a little man and I had a feeling even though it wasn't moving that he was there because the flowers were being drawn to it. Say before I went inside the house I decided you know what I'm just going to push this shovel in there and I'll be damned if I didn't get me a freaking mole I guess the shovel caught him when I went in so he was already pretty much dead you know but I slammed him on the ground and I beat him with my shovel for good measure. I'm pretty sure they could hear me cackling all the way down at Walmart I was laughing and doing a little jig and dancing and clapping I have never been so excited in my entire life to kill that little mother lol. Thank you from the bottom of my heart the bottom of my wallet and all the anguish and turmoil and money and stress that this thing has caused me I know it's not over yet I got to check for more but this sir worked and you are freaking amazing and I thank you so!😊

Thanks for the advice. I cancelled my order for it and since I am getting a replacement for a toro max 50 (only because of bad assembly) I’ll see how things go when it arrives. The first one cut great. No excess accumulated grass and easy access to everything. 5 gallon gas tank and a very good seat.

Mine has a full fixed choke barrel.

Guess he got soft hands to load 20 bullets in a mag

sadly there is almost no commentary at all.😂

If your hitting higher forces on the road than you are at sea then there is a problem….if you boat can’t take the forces of being at sea there is an even bigger problem.

My ZT3100 on my Gravely has an Oil filter.

I’m in SW France and Moles here are a real pain in the arse, I have traps set all over the place but im going to try your methods this morning.

I never could see the fascination with stripes, as long as it cuts even is all I'm concerned about. I was never a Toro fan but I bought an older timecutter and have enjoyed using it.

Hose & pitch fork

Cub Cadet ZT1 mowers leave to many stragglers for my customers, I was forced to buy a better a better mower or loose my customers. I chose the Toro Time cutter used 2015 model with 400 hours. It mows a 100X better than the Cub Cadet did.

Is this gun pocket carry able? Good review!

Winchester 333, hmm

Thank you!

Is that bottom bolt usually hard to get back in place?

I've mowed 5' tall wet grass at 1.75 late at night and it did great, made 2 passes. This mower can handle a lot!

Clip you boat plug to your key ring. If you are starting a boat with a pulg attached you wrong.

I'm confused why the one without the laser has one bolt not two

I have had a P322 for about 5 months. Took the light off because no matter what we did it went low left. Put hard sight on and it's fixed. I checked my barrel because of this video. It's fine. I have put about 3K round thru it ... CCI 22LR Mini Mag Hollow Point. Barrel is perfect. I will checlk my barrel every time I shoot though. Thanks

Thank you. Got the Kobalt back in 2017 for all the reasons you listed. It’s worked fairly well on my travel trailer that needs 80 PSI until this year. Now it won’t put out past. 40 PSI. Any suggestions?

Colt's usage of the adjective "Target" is a sales ploy. With a 5-pound single action trigger pull, this is no target gun. The first thing that I had to do to my KC .22LR was to replace the thimble-sized rubber grips for my medium-large hands with a set of longer wooden grips. With regards to the sights,, my gun would consistently shoot approximately 6-inches high at 25-yards, so I replaced the rear sight with an Elliason rear sight and the front fiber optic sight with a Patridge-style front blade. The 5-pound trigger pull is still something I'm dealing with and I hoping that a video with come out on how to stone the single-action sear.

I just bought a brand new “48 version. I sure do hope it’s not a piece of garbage!

I tried to use your Discount code but it does not work , maybe it’s expired

Great video - what type of backstop are you using when shooting the target?

Try the +2 EMP mag extensions; an ergonomic miracle on the Shield. Fantastic ergonomics with Hogue grip sleeve.

After watching this I think I will buy one.

OHHHHHH!

I just used my CMMG conversion kit for my A. R yesterday, on June 2nd, 2024. I can only give it bad reviews. Because the first four shots and the only four shots that I even used it for I had the same hiccup you were talking about. 4 times in a row.. The .22 casing will pop right up in. To the bolt, carrier and cause it to jam. A person shouldn't have to go to bore buddy. By this time, in the game, and buy extra repairs to stop it from doing that. I think c m m g, needs to redesign the bolt carrier. And offer free upgrades to those that have already spent the money and put their faith in cmmg. I thing it is junk.

I purchased mine in 2022.. best mower I've had. I'm a woman who likes outdoor work and no non sense. This is a no nonsense mower.

I'd just like to be a fly on the wall at the Sig plant listening to what gets said by the machinists about this at their meetings. At Ruger, somebody would've already had a Come To Jesus meeting with the plant manager about WTF out of spec barrels keep finding their way into embarrassing (to the company) KZfaq videos. A really great company will reach out and put forth the effort to solve the problem and make customers happy. Shit companies try to blame the customer and sweep the problem under the rug.

The whole idea of a ZTR is to be able to mow quickly and be very agile.

At this point Sig CS may be picking on you.

Thanks! I was able to fix my spinning reel. Almost bought a new one to replace it because I couldn’t figure out how to fix it

Hey Buddy sweet looking gun and very nice review. Just an update on the Transfer Bar Mechanism and how it works when you pull the trigger the Transfer bar stay in place if it moves down then the Hammer will not reach the firing Pin. The Transfer Bar is like a Bridge that connects the Hammer to the firing Pin. Nice vídeo keep up the Good work.

My boat needed a new transom at 10 years. Had a saver on it the last 29 years and the transom is still in perfect shape. I'd call it a transom saver.

Do you have to change hydraulic fluid on it?

Those are completely junk. Constantly failing cheap built.

******* I HAVE NO ISSUE WITH IT BUT IM NOT AN IDIOT !!!!! *******

I've had really good luck with mine after about 1500 rounds. Only ran CCI mini mags through it and I consistently can hit out to 100 yards with the cheap sig romeo zero 3 moa dot that I put on it.

ZT 3100 and 3400 do have filters on tire side of housing..

b got the zt1 with the steering wheel 50" works great on my 3 acres with a ot of hills 111 hrs( burnt thru plenry of gas) rather hard to service and a bit overpriced they left things that would have cost a few dollars and would have made this great mower how can you service the transmission on this thing?

I have the ZT1 54 I never had problems with my deck and the mower cuts good but setting in the seat while cutting will literally jar your insides out it is very rough riding if you don’t have a perfectly smooth yard or buy a much more expensive seat I think I will go back to tractor style this Cub Cadet was very expensive for such a poor ride

Man, U dont know how to make a video that makes any sense. 😂😮😂😊

Did they charge you shipping?

transom saver helps the transom and the hydraulics both by locking the motor in place, not sure why folks would wanna use a hydraulic saver only makes no sense, although ive seen people say the reason they use em is cause they dont like the look of the transom saver lol to me its form over fashion haha

I was looking at this and the 48" new Ariens Icon. I went with the Ariens. Seemed like a decent step up in quality and was on sale for only $250 more. The deck chute, with the blade right there on the ZT1, is ridiculous. The Ariens also has armrests and just feels more like a commercial quality mower over a cheaper residential one like this.

Guess I better go get some more Crown and ice, I'm gonna be in the yard for awhile.

FYI TX22 was Handgun Of The Year in 2018! Issued by Handgun magazine! If you shot one, you would feel differently, also its the first striker fired 22LR pistol as it came out before the G44.

Not the best info. Other than looking at it. They all have filters just on different locations, looking at the fan doesn't really show how it cools, its the amount of fluid and you didn't talk about weight difference or speed or anything. I get your doing a visizual video but really no info