Looks like it was a successful day May 19 for everyone ❤
@isharagunasekara7105Ай бұрын
Mini car
@boscong3826Ай бұрын
For the headlights and taillights what was that spray you used and how did you get them coloured?
@thewhitewillАй бұрын
For the buckets it's just chrome paint and the colour is a sharpie permanent marker.
@aruviaslin9101Ай бұрын
How to buy... Link send comment la pin pannunga bro
@limefilms432 ай бұрын
Looks fire 🔥
@Androedoff2 ай бұрын
🔥🔥🔥
@joanpepe54542 ай бұрын
No talking no watching
@thewhitewill2 ай бұрын
Up to you mate 👍
@rdc442 ай бұрын
Where is that if you don't mind ????
@thewhitewill2 ай бұрын
Initial g in Kent uk
@cerczy3 ай бұрын
Whats that black stuff u put around the tailights and everything else
@thewhitewill3 ай бұрын
Body line tape .5mm tape to show shut lines?
@SeeFPv-qm6ie3 ай бұрын
what kind of front tires are those ? i just got into rc drifting
@thewhitewill3 ай бұрын
they are MST FR-F silvers for carpet.
@basilairbrush87083 ай бұрын
hi , im after getting a sun roof frame made for my 1/10th scale estate lada drift shell , do you take orders ? 100mm wide 150mm long ? i want a big opening so i can build an interior to be seen from above , roll cage and driver , id make a rag top to complete the look.
@thewhitewill3 ай бұрын
No mate sorry I Don,t good luck with it.
@dbfcrell83003 ай бұрын
Now that I've gone to a, all- metal chassis /suspension and 370 motor with metal gearbox, my stock WPL control board can't handle the weight and constantly has to be re-paired with the radio. What board and metal gear servo should I buy to handle all the weight? Hopefully I can use the stock radio. Oh, its not a drift truck. It's more of a work vehicle that Ill turn into a crawler someday.
@thewhitewill3 ай бұрын
I had the same problem I got rid of the original radio gear right away the servo was just a cheap amazon one I used but if I was doing this again the chassis would stay plastic it adds far to much weight.
@DaddyDog3 ай бұрын
I bought the same control arm kit and installed it, but the lower control arm didn't have enough range of motion at the pivot ball for the suspension to work, so it was just ridged. Did you run into anything like this?
@thewhitewill3 ай бұрын
hi mate yes i did i had to open out the holes in the arms to give more movement real pain in the back side good luck with it.
@JackOnly214 ай бұрын
Kerrreeeennnnnnn
@69_Enjoyer4 ай бұрын
I thought it was real until I saw how big the chairs are 😂
@thewhitewill4 ай бұрын
🤣🤣
@DJCallitquits4 ай бұрын
As Joe Rogan would say..MMmmmmmmmm
@fredbradick84044 ай бұрын
What body is that you have
@thewhitewill4 ай бұрын
It's a pandora jzx 100
@jamescampbelljr11664 ай бұрын
A link as to where you got your aluminum parts?
@thewhitewill4 ай бұрын
all from eBay mate but the arms didn't work needed a lot of modification.
@fredbradick84044 ай бұрын
Question how did you attach the front and rear bumpers to the body ?
@thewhitewill4 ай бұрын
Double sided tape and shoo gue 👍
@fredbradick84044 ай бұрын
Looks amazing any pics of how you have the body mounted to the chassis
@fredbradick84044 ай бұрын
Do you have any pictures of how you mounted the body to the chassis
@thewhitewill4 ай бұрын
I use Eagle racing mangnet mounts very strong have them on all my chassis never have any problems.
@fredbradick84044 ай бұрын
What product did you use to paint the front and rear window frames and the side window frames? Did you paint them from the inside or outside
@thewhitewill4 ай бұрын
They are done on the outside with matt black paint I cut the protective film hope this helps
@MercedesAmgGt4door-kq4qu4 ай бұрын
Wya get it?
@thinukawijerathne4 ай бұрын
Well done!
@ianwyatt86604 ай бұрын
Hi, I have the same bodykit, what size wheels did you use. Ones I bought are too big to use with the bodykit.
@thewhitewill4 ай бұрын
Hi they were top line m chassis wheels not sure of the actual size.
@tunar.quluyev4 ай бұрын
❤❤❤❤
@OloPGmc4 ай бұрын
How do you do backfire?
@thewhitewill4 ай бұрын
This is a real car light up dust cap cut down and stuck to exhaust very cheap on ebay.
@aryanata22284 ай бұрын
Cool build, i hope i can buy that kit too lol
@thewhitewill4 ай бұрын
Thanks my son loves it.
@Daxter777184 ай бұрын
Que cool 😎👌🏻
@OnaDoT7184 ай бұрын
Link to those rims ?
@thewhitewill4 ай бұрын
they are MST adjustable wheels should be easy enough to find
@FlipsideRC4 ай бұрын
Awesome video man, subbed! I was interested to know what the white barrier walls are made out of and if you recommend a store that may sell them. I can only find garden edging.
@thewhitewill4 ай бұрын
Hi mate they are upvc window trim should get them at most DIY stores.
@valentinocardozomarino63994 ай бұрын
Donde lo compro?
@Tman174 ай бұрын
Also how did you paint the light buckets because the rear light buckets don't have any markings for where to paint
@thewhitewill4 ай бұрын
Buckets are silver and the lens is red sharpie just on the bottom half
@Tman174 ай бұрын
@@thewhitewill thanks
@Tman175 ай бұрын
what mirrors did you use fior the car becasue it doesnt include any with the shell
@thewhitewill5 ай бұрын
They are just some cheap ebay ones
@Tman175 ай бұрын
@@thewhitewill thanks
@fredbradick84045 ай бұрын
what paint did you use to paint the window trim on the outside
@thewhitewill5 ай бұрын
Just regular car paint matt black.
@ledlight66305 ай бұрын
😊😊😊😊
@jellevandeplas5 ай бұрын
Is it p-tile floor?
@thewhitewill5 ай бұрын
No it's plastic sheet getting very common now in the UK.
@AJYZF1R20105 ай бұрын
How do I build one of these
@thewhitewill5 ай бұрын
There are plenty of ready to run kits available just search for rc drift car.
@AJYZF1R20105 ай бұрын
@@thewhitewill thank you I’ve got some trucks and buggy’s but this is so cool
@TheBarreraLifeStyle5 ай бұрын
clean
@thewhitewill5 ай бұрын
Thanks
@ck_lowman5 ай бұрын
Sick video. Where did the blitz livery come from???????
@thewhitewill5 ай бұрын
Driftmanjirc.com
@asborc21025 ай бұрын
❤❤❤❤❤
@thewhitewill5 ай бұрын
Thanks mate 👍
@user-bh2st3er4h5 ай бұрын
Are those toys or why am I seeing a giant legs at the last part
@thewhitewill5 ай бұрын
Lol that is a giants leg 🦵 🤣
@thegee-tahguy48775 ай бұрын
I just ordered the shocks, metal front suspension, metal transfer case and uprated drive shaft and the same rear axle you have. No idea what the hell I'm doing, but can't wait for it to arrive.
@daboyprince235 ай бұрын
Me too😹😹
@budakkampung70615 ай бұрын
Keren 👍👍👍
@Rcdriftchase5 ай бұрын
Nice tandem!
@Alex_G4merYT5 ай бұрын
Nice cars!
@fredbradick84045 ай бұрын
love your drift car where did you get the roll cage from
@thewhitewill5 ай бұрын
Thanks mate 3d printed it myself. 👍
@fredbradick84045 ай бұрын
that is one epic build where did you get the roll cage from
@thewhitewill5 ай бұрын
Thanks mate all designed and 3d printed by myself.
@fishyforlife51746 ай бұрын
Where is this
@thewhitewill6 ай бұрын
Hi mate it is in Southend on Sea are you local?
@fishyforlife51746 ай бұрын
Yes kinda of 50 min drive might pop down there what’s the website or group ?
@thewhitewill6 ай бұрын
@@fishyforlife5174 rc drift monkeys on facebook
@thewhitewill6 ай бұрын
@fishyforlife5174 also take a look at angle addicts it's another local track.