Пікірлер
@matts.9330 16 сағат бұрын
What model is your dishwasher? It looks like my dw80k5050ug. Just wondering so i can order the bearings prior to tearing it apart.
@mikeyestes 21 сағат бұрын
Thank you for the video and the time to help others! Excellent steps!
@RaztechPowersports 20 сағат бұрын
@@mikeyestes glad it helped 👍🏻
@hondaatc1987 Күн бұрын
My 05 4x4 350 rancher will not free up.. I tried this method.. no luck
@hondaatc1987 Күн бұрын
I got it free! I didn't tie it to a tree this time. I simply put it in first and while holding up on the shifter I gave it a lot of gas,then let off.. repeat.. repeat and it unstuck!
@RaztechPowersports Күн бұрын
@@hondaatc1987 sometime it take a pretty hard hit to break free.
@thatbelgiandude1433 2 күн бұрын
What wheels are those ? I dont find any that fits mine
@racingdreamz8021 2 күн бұрын
Corsa all day long
@nomadic9953 2 күн бұрын
that might be the most amazing sound ive heard come out of a dodge
@timothyhubbard2951 3 күн бұрын
Where did you get the gasket? eBay says they have them but idk if it’s the right one
@RaztechPowersports 2 күн бұрын
@@timothyhubbard2951 I’ve always had good luck with parts on eBay
@BrianPhillipsRC 5 күн бұрын
Cool project - thanks for sharing! I love bridges! We had to build one too, and it was a LOT of work. Liked your setup.
@RaztechPowersports 5 күн бұрын
@@BrianPhillipsRC appreciate it!
@anthonyrowland9072 5 күн бұрын
I had a 400 version of these. I actually had '94 400L utility too. If anyone is wondering, don't be afraid of the 2 stroke. It didn't get super cold in TN but mine always started almost like EFI (but had to warm up). Scramblers are great even the 2wds because it's a sporty atv that still has ground clearance, you don't have to go around ALL DAY on trails.
@deesmas 6 күн бұрын
How did you take off the dashboard? Took my doors off but still wont budge
@deesmas 6 күн бұрын
Nevermind. I'm dumb. Realized you took yours apart so I wouldn't have to take mine apart. Ty for your awesome tutorial!
@joshcraig9304 6 күн бұрын
Thanks for sharing! Mine’s doing the exact same thing. Going to try this. Thanks!
@dannpd1955 7 күн бұрын
I enjoyed your video a lot. I’m looking at a couple of C6 corvettes tomorrow. One is a 2011 coupe in arctic white the other two are GS 2013 with 15k more miles. Both are the dark metallic blue.
@1996ikey 7 күн бұрын
What size tire u got
@dr_flunks 8 күн бұрын
this did not work for us. we rebuilt it several times.
@RaztechPowersports 7 күн бұрын
@@dr_flunks unfortunately your needle is not seating correctly. Sometimes it’s better just to buy a new carb
@MattCasdorphGaming 2 күн бұрын
Shoot some carb cleaner up that area where the needle valve goes. Take a qtip and stick it in it and twirl it to see if it comes out dirty. May not be the needle valve but where it seats. Correct me if Im wrong, those seats can be changed out too? Im pretty sure Ive done that before. Could also be the float itself has a pinhole leak and not raising enough to seat the needle valve
@lucaswaters1219 8 күн бұрын
Hey good morning, Great video....I have an issue my bike is stuck in 4TH....any suggestions? Thanks in advance
@beastbomber2511 9 күн бұрын
My 97 ranger the clutch pedal won’t go to floor and I have press super hard to get it to start but won’t move I can shift gears and it won’t stall when it’s in gear
@Ionz2 10 күн бұрын
What year this thing looks nice
@RaztechPowersports 10 күн бұрын
@@Ionz2 I believe it was a 2006
@bloodbushcraft2467 10 күн бұрын
Yup that's it
@mikebowers5598 11 күн бұрын
Mine presented as a mass airflow sensor fail. Replace the mass airflow sensor before I saw the split. Installing new hose today.
@RaztechPowersports 11 күн бұрын
@@mikebowers5598 I believe the new OEM part is upgraded now
@chandlerallen4012 13 күн бұрын
Hey man i just purchased a 1987 Honda Fourman 350D and i am having that same problem in the video, how long did it take you to to get the secondary clutch to break free and are you reving before you shift after you shift. i tired it today and mine seems to be pretty stuck but im trying to get out of breaking into it. Got anymore pointers. Much appreciated in advance. Great videos so far on this bike.
@RaztechPowersports 13 күн бұрын
@@chandlerallen4012 yes sometimes it can be pretty tricky to get the clutches to unstick. You can also drive around with the shift lever fully pushed down, which is decompressing the clutches.
@chandlerallen4012 13 күн бұрын
@@RaztechPowersports so while I’m in second push it down and ride around like that for alittle, or should I strap it to something like in the video
@RaztechPowersports 12 күн бұрын
@@chandlerallen4012 correct. 1st gear if you strap it to something
@chandlerallen4012 11 күн бұрын
@@RaztechPowersports after multiple attempts of shifting back and forth and letting it heat up, I finally got it to break free. Glad I don’t gotta break into the case rn. Thank you for the help man
@RaztechPowersports 11 күн бұрын
@@chandlerallen4012 awesome! Now purposely slip the clutches while riding to smooth out the steel plates. If not, it’ll stick again.
@YouMotorcycle 14 күн бұрын
Good video. Might have been a cool idea to pop the original in a rice bag for a day or two, try reinstalling it, and seeing how long that did or didn't work for.
@RaztechPowersports 14 күн бұрын
@@YouMotorcycle I broke it open and there was no moisture. The lens had a foggy film on it.
@tharockefeller 15 күн бұрын
Is there a way to clean it and not get a new one
@tharockefeller 15 күн бұрын
Mine won’t open from the inside ? Got a fix for this ?
@DaveNorthWest 15 күн бұрын
Also are there any cheap nice fans for these that are more energy efficient and more performance? The OG fans are from 1985 from my understanding and you think a newer fan cheap but better these days?
@RaztechPowersports 15 күн бұрын
@@DaveNorthWest yeah new fans are probably brushless and built better
@DaveNorthWest 15 күн бұрын
is there something wrong with not just getting the replacement sending heat switch thing for these or are they a rip off in price?
@hughiemaceachern5282 16 күн бұрын
That u
@jbwildlifecapturingservice3799 17 күн бұрын
I gave $1500 for my 2017 from Parker McCollum and 1500 for a 2017 6person Polaris xp 1000 how much did u pay for yours
@tomtalker2000 17 күн бұрын
Why in hell would you need more. The hemi engine is MORE than loud enough even at idle. Anymore than that is just obnoxious noise.
@RaztechPowersports 17 күн бұрын
@@tomtalker2000 assuming you haven’t heard a stock Durango rt in person? Very quiet imo.
@chrissammarco303 18 күн бұрын
hey just wondering where you got the kit from
@thesicillianbull 18 күн бұрын
Anybody else got 2nd row buckets ? Love my sel
@thesicillianbull 18 күн бұрын
How was the ride quality ?
@RaztechPowersports 17 күн бұрын
@@thesicillianbull more sporty but not harsh
@tomfisher5321 18 күн бұрын
your car is beautiful. The interior is so impressive.
@RaztechPowersports 18 күн бұрын
@@tomfisher5321 thank you 🙏🏻
@RandomNEGuy 21 күн бұрын
thanks for the video.I have a ZD1211 (with a 60" deck) --- my manual says that only the RH and LH models have the rear axel gear case plugs ... time to go take a looksie. thanks again.
@anthonyf4439 22 күн бұрын
I’m guessing the driveline offset is the hold up on this build.
@RaztechPowersports 21 күн бұрын
@@anthonyf4439 I think that the offset would’ve been reasonable enough to work. Ended up having three kids lol
@noodle_car 22 күн бұрын
my uncle put a truck battery on my old power wheel and i went 50+ on a straight
@ryanc7929 25 күн бұрын
Wow! Amazing video an AMAZING tribute to your dad. Brought a tear to my eye.
@juanandresruizlondono4012 26 күн бұрын
Tengo uno fourtrax 300 modelo 1995
@notafakeliarortwofacedback175 26 күн бұрын
I've owned king quads since they were still called quad runner..and I wouldn't buy a cam am for nothing! People here ride them etc and get stuck,break down,belts slipping,the radiator on front rack on newer ones are stupid,etc. Kq are tanks!!..can't get them stuck unless sitting on skid plate! To say cams are better is a bs statement!and you don't need 4wd to do any of the stuff you show here riding! I pull cars,trucks etc out all the time!..and my 1999 kq 300 does 55mph..and here in the mountains..speed doesn't matter!!dependability and getting threw anything does!!!!
@DaveNorthWest 26 күн бұрын
I bet it smells like ass rebuilding seats
@caseman91 27 күн бұрын
Hey did you need to rejet the carb. Thanks
@RaztechPowersports 27 күн бұрын
@@caseman91 stock jetting
@caseman91 27 күн бұрын
@@RaztechPowersports thanks, I’m fixing up a 350 that already had this piston in it so was unsure if jetting needed to change or not.
@RaztechPowersports 27 күн бұрын
@@caseman91 yeah these old Hondas have a pretty rich fuel mixture. Upgraded piston has a better compression ratio than stock, but doesn’t need 93.
@Chadthemadlad23 28 күн бұрын
So are the formans all time 4x4 or is there a lever for 2wd
@RaztechPowersports 28 күн бұрын
@@Chadthemadlad23 yes it’s full-time 4x4
@robmccance 29 күн бұрын
Thanks for the video. Looks like I'm 6 years late to the party. Tried to install those same oil cooler lines in my 2010 MT Base today and was like screw it, these crooked pipes are not both going through that maze to get to the front. I'll come up with something else, probably removing the crooked solid metal ends, snaking the flexible lines through, then reattaching the metal ends. Or something!
@MrTeff999 Ай бұрын
I fixed my grounding problem by running a grounding wire all the way (through the frame) from the tail lights to the plug. It eliminates all possible failure points.
@lycanit Ай бұрын
Super cool, bike bro I got one to restore myself. I got to show my girl this video to show what it can be thanks.
@user-jp4ic1ys2q Ай бұрын
How much did you end up paying for the bike? Seems like a good deal
@JohnJKelly-of4dc Ай бұрын
Mine has 2 3 and 4 but won't go into neutral or 1st
@anthonyscott16 Ай бұрын
Very clean look bro. Using the socket was pretty clever as well.
@RaztechPowersports Ай бұрын
@@anthonyscott16 thanks! Always problem solving.
@jack_freiburger Ай бұрын
will this give a dash light
@RaztechPowersports Ай бұрын
@@jack_freiburger no sir
@larryphillips4164 Ай бұрын
Don’t buy the K&N cold charge pipe kit, it’s bs. They trying to save money by not making the little rubber elbow piece too short by 1/2” and the metal clamps are 1/2” too short as well. Fucking hell cmon K&N. I’ll give you $5 more dollars to not make this shit a struggle fest!!!