Пікірлер
@mikecupp8546
@mikecupp8546 13 күн бұрын
Wish I had watched this earlier. I ended up doing mine this way with the puller. But the first one I pushed the blue needle through the 7” bury. 😂
@James.712
@James.712 14 күн бұрын
So running it back through is kind of like backserving a bow string? I ordered one last night, I'm sick of stock belt loosening up throughout a sit.
@theamsteelguy4114
@theamsteelguy4114 14 күн бұрын
@@James.712 correct! That’s a great way to describe it
@James.712
@James.712 10 күн бұрын
I wear a 33 to 34 waist jean. Any recommendations on how long/short to cut it while leaving room for layers and colder weather?
@theamsteelguy4114
@theamsteelguy4114 10 күн бұрын
@@James.712 we leave it super long where it will fit up to 48” waist. I recommend make it as long as possible. Put your clothes on and trim about 4” longer than that!
@Im.hurtnLinda
@Im.hurtnLinda 2 ай бұрын
Will these work on Cranford rope steps?
@theamsteelguy4114
@theamsteelguy4114 2 ай бұрын
Yes!
@Im.hurtnLinda
@Im.hurtnLinda 2 ай бұрын
@@theamsteelguy4114 you should do a video
@MrDCampbell
@MrDCampbell 3 ай бұрын
What link can I go to to order? This will work great with ghost blind!
@theamsteelguy4114
@theamsteelguy4114 3 ай бұрын
We will be posting this soon! Probably the next week or two!
@theamsteelguy4114
@theamsteelguy4114 2 ай бұрын
theamsteelguy.com/products/the-stolek-tm-mobile-ground-chair?variant=48169100935466
@GraceInTheOutdoors
@GraceInTheOutdoors 3 ай бұрын
Very nice!!!!
@frankiefiveangels915
@frankiefiveangels915 3 ай бұрын
Great work, Sam. Keep it up!
@GraceInTheOutdoors
@GraceInTheOutdoors 3 ай бұрын
Excited for this. Congrats on finally going to market!
@deerslayertv1139
@deerslayertv1139 4 ай бұрын
Where can I order these ?
@theamsteelguy4114
@theamsteelguy4114 4 ай бұрын
theamsteelguy.com/products/1-8-amsteel-aider-for-stick-with-double-steps
@2004crewcab
@2004crewcab 6 ай бұрын
Just got mine, I was wanting adjustable length for the bridge. It’s great quality, can’t wait to try it out.
@chmgeg1025
@chmgeg1025 8 ай бұрын
Do you sell the setup
@JGunit
@JGunit 9 ай бұрын
That first step is a DOOSEY
@richrappa7906
@richrappa7906 9 ай бұрын
Awesomeness! Also a lefty😂. Brought 1 on Etsy 👍
@eddierodriguez7250
@eddierodriguez7250 10 ай бұрын
How do you attach these to your Xop x2 sticks?
@theamsteelguy4114
@theamsteelguy4114 10 ай бұрын
Slide it through the outer triangle hole and wrap around the tip of your step
@greggkimbell7969
@greggkimbell7969 11 ай бұрын
Smart I got aiders from Amazon for 13 dollars
@kentuckykayakfishing6218
@kentuckykayakfishing6218 Жыл бұрын
Which aider is this on your etsy page . Wanna make sure i order the correct one . Thanks
@chasejones7285
@chasejones7285 Жыл бұрын
Does this effect folding the step up?
@theamsteelguy4114
@theamsteelguy4114 Жыл бұрын
Not at all!
@justintanner7020
@justintanner7020 Жыл бұрын
Boys climbin up them sticks in hey dudes
@reddawng43x91
@reddawng43x91 Жыл бұрын
Imo this is the best simplest safest quietest way to hang a stick other than the factory straps
@reddawng43x91
@reddawng43x91 Жыл бұрын
Jesus Christ ! 10x faster with a cam buckle
@boatkid888
@boatkid888 Жыл бұрын
Is the step you are using the new XOP x2's?
@rustytygart405
@rustytygart405 Жыл бұрын
Wish you would have given us a close up of this in action
@ultimaider6138
@ultimaider6138 Жыл бұрын
Great concept Sam. I like it.
Жыл бұрын
What’s going on? What’s this about? I can’t even
@328am
@328am Жыл бұрын
I love your products! If I wanted to upgrade an existing rope mod for sticks, to a USA system, what size continuous loop do I need (to make the prussic) to work with the beast tender?
@theamsteelguy4114
@theamsteelguy4114 Жыл бұрын
1/8” 10” diameter
@Rggrimes16
@Rggrimes16 Жыл бұрын
Can you tell me where do I order the amsteel rope with the tenders already on them for one sticks and the new trophy onyx saddle stand. I want the larger amsteel rope for the onyx and the one pictures for the sticks. Names are confusing.
@theamsteelguy4114
@theamsteelguy4114 Жыл бұрын
www.etsy.com/listing/1207256503/usa-ultimate-stick-attachment?click_key=1beaff0a50d0221cfd2d418fb6dc4ddc01064d56%3A1207256503&click_sum=688598cf&ref=shop_home_recs_2&crt=1 Save10 will save 10%. You’ll want the stand/platform pro for the onyx. The sticks you can go regular or pro. They both work well
@andrewlafontaine9525
@andrewlafontaine9525 Жыл бұрын
Can these be used with the wild eagle step ladder steps?
@waltbuzby8644
@waltbuzby8644 Жыл бұрын
I have a 3 step aider like this was made for a double step stick , Is there any way to covert it to use for a single step stick ? Thanks
@Labradorslobber
@Labradorslobber Жыл бұрын
Just got mine from you in yesterday mail. Thanks for the vid. I had it looped over the step and was worried about it wearing. Your way is much better.
@reeltherapy575
@reeltherapy575 Жыл бұрын
How big (long) is the continuous loop?
@KiloWhiskeyOne
@KiloWhiskeyOne Жыл бұрын
Mine just arrived...it's a game changer! Thanks
@northeastwildernesswalker
@northeastwildernesswalker Жыл бұрын
another plus about putting the aider in the front is when you put weight on the aider it will drive the bottom forks of your stick into the tree
@TheManic.5-OH
@TheManic.5-OH Жыл бұрын
Where do we get these aiders?
@downsouthhunting6202
@downsouthhunting6202 Жыл бұрын
Hey buddy if I order the normal USA series on double steps will this be what comes with it? Wanting to order a couple pros but was wanting to make sure this beast tender come on the non pro series
@theamsteelguy4114
@theamsteelguy4114 Жыл бұрын
The beast tender comes on all USA’s we sell now
@downsouthhunting6202
@downsouthhunting6202 Жыл бұрын
@@theamsteelguy4114 great!
@timkirby3340
@timkirby3340 2 жыл бұрын
I’m just now learning about Amsteel and I’m sure this is a dumb question… I got mine today and had no problem setting my platform with it. That said loosening it to get it back off was a pain. What’s the best way to loosen it back up to take it off?
@BriarJumper
@BriarJumper 2 жыл бұрын
Can this mod be used on any stick and not just a "Beast Stick" or am I reading too much into the name....
@theamsteelguy4114
@theamsteelguy4114 2 жыл бұрын
Reading too much into the name. It’s named after the plastic piece which is a “beast d ring”
@brentbergamasco4014
@brentbergamasco4014 2 жыл бұрын
This is exactly what I did when I got my One Sticks before you made them available (I bought aiders for a different model, which we know are pretty much the same), except looped on side on permanent (with a loop pass through) and then used zing it on the other side with a few pass-thoughts to ensure it stayed on. Got into making my own Amsteel stuff, but always go to you for the more complex items (aka, beyond my skills)... Thanks!
@Killada3pt
@Killada3pt 2 жыл бұрын
Is there anywhere I can get a better detailed explanation of what this beast tender does? I’ve seen the USA used with and without and still have no clue what this tender does. 🤷🏻‍♂️
@millerb32
@millerb32 2 жыл бұрын
Would you prefer this over a Zingit tender?
@youtoober87
@youtoober87 2 жыл бұрын
I don't see this option on EWO yet. is there an ETA?
@theamsteelguy4114
@theamsteelguy4114 2 жыл бұрын
doublesteps.com/product/amsteel-beast-tender/
@caseysmith9275
@caseysmith9275 2 жыл бұрын
I like that, my bridge on my phantom isn’t the easiest to loosen up that’s for sure.
@MattMacKo
@MattMacKo 2 жыл бұрын
Is this the same product I found on etsy? I just got a set of skeletors from tethrd. Getting on that first step is a challenge. Figured I may order four aiders at 16in of aid. Would get me a little higher that 16ft.
@theamsteelguy4114
@theamsteelguy4114 2 жыл бұрын
Yes. These work on both the skeletors and the one sticks from Tethrd!
@MattMacKo
@MattMacKo 2 жыл бұрын
@@theamsteelguy4114 sweet, ill likely make a purchase laster today
@TheBuckPsych
@TheBuckPsych 2 жыл бұрын
I love the crocs bro lol
@timbertinestv5547
@timbertinestv5547 3 жыл бұрын
Would these work with novix double sticks or most double sticks ?
@theamsteelguy4114
@theamsteelguy4114 3 жыл бұрын
Yes they will! I have a specific one that works a little better if you message my Facebook page I’ll show you
@chadworkman2073
@chadworkman2073 3 жыл бұрын
What size
@jamesmarsee3297
@jamesmarsee3297 3 жыл бұрын
Where is the vid on how to make a 3 step Aider that hooks over a double step stick?TIA
@theamsteelguy4114
@theamsteelguy4114 3 жыл бұрын
There’s a video coming shortly for that!
@jamesmarsee3297
@jamesmarsee3297 3 жыл бұрын
@@theamsteelguy4114 Good deal i have some Amsteel headed my way.
@vanniek71
@vanniek71 3 жыл бұрын
Perfect, was looking for something to do with these!
@grytv2087
@grytv2087 3 жыл бұрын
Niceeee
@bsites9
@bsites9 3 жыл бұрын
I’m about to order a couple. Can this exact aider be used on muddy pros?
@theamsteelguy4114
@theamsteelguy4114 3 жыл бұрын
Yes it can!
@bsites9
@bsites9 3 жыл бұрын
@@theamsteelguy4114 thanks for the fast reply. Now just to figure out step distance.
@theamsteelguy4114
@theamsteelguy4114 3 жыл бұрын
@@bsites9 5’10 or under 16” 6’2-5’10 18” 6’2 plus 20”
@bsites9
@bsites9 3 жыл бұрын
@@theamsteelguy4114 wow. Really? I’m 5’9”ish. Since my sticks are 20”, I just assumed the 20’s would probably work.
@theamsteelguy4114
@theamsteelguy4114 3 жыл бұрын
@@bsites9 I would recommend the 16 or 18”. I’m 6’4” and use 20”
@fulldrawcoffeecompany8906
@fulldrawcoffeecompany8906 3 жыл бұрын
The wizardry! Awesome, this just helped tonight!
@grytv2087
@grytv2087 3 жыл бұрын
Very good