Still a great idea and way better than the ones I’ve seen so far
@alainjacob872Күн бұрын
Thank you. Lever easy to find, easy to press, but absolutely impossible to rotate on my Canon FD f1,4 50 mm SSC...I don't understand why.
@DezNutz892Күн бұрын
saved me 10 bucks king, may you receive all of God's blessings in life and more
@larryjohnson75912 күн бұрын
Pretty good coverage of how the mount is installed and how well it works. Thank You.
@striker12112 күн бұрын
I'm glad the video helped you. It's a great mount, I'm glad I didn't buy the cheaper one that the TV "hooks" onto on the wall.
@user-dt2yp9ne8b2 күн бұрын
Holy shit! You might qualify for government funded assisted living.
@brettas394 күн бұрын
Thanks for the video. The part (same part number 0C30250SRV) I just got looks different. The screws are too big to fit into the apertures in the prongs. It looks like they want you to do a different type of connection, which may involve stripping the wires to fit their connector, but not sure.
@tiffanyhp74 күн бұрын
Seriously, this was such a great review. Greatly appreciate you for this. I got the Cheaper Ozark and I'm gonna get this one as well to compare them. Plus im worried the Ozark will fail us honestly loll we shall see. But thank you again.
@dredlew4 күн бұрын
Finally a video that explains it. Great job should have a million views
@andreag54335 күн бұрын
Thank you
@mattluedtke54586 күн бұрын
😅😅😅😅 cuz there all replacements, you match them to the one u rem9ve when they go bad
@creolelady1826 күн бұрын
also check the level for each tier
@creolelady1826 күн бұрын
It helps if it is on a completely leveled surface
@Osiiii236 күн бұрын
Why does the app not have my model. Anyone else have any recommendations on how to connect to the app so i can monitor better
@striker12116 күн бұрын
Not all models are app capable, the one in this video is not and I like it that way.
@Dana_inc6 күн бұрын
I love shark products but this one sucks! Well at least the one I have . I did not buy it from shark though.
@wiggypop6 күн бұрын
I bought this with the titan ice packs, so I’m hoping that it keeps our stuff cold-ish for 4-5 hours
@jerryjohnson2687 күн бұрын
What was the Wagner gun you were using? I need to do to the very same work on my 2006 F150
@striker12117 күн бұрын
@@jerryjohnson268 Wagner ht1000
@SB-lm2jf8 күн бұрын
hey bud, i'm gonna take this old boat to my mechanic for that prop shaft seal and the water pump seal. my transom saver won't keep the motor from turning while towing. any suggestions for keeping that motor stabilized while towing?
@striker12118 күн бұрын
@@SB-lm2jf I've never used a transom saver so I cannot help you there. I just turn it all the way left or right after raising it and then flip the motor lock, and lower motor down on lock.
@SB-lm2jf8 күн бұрын
@@striker1211 thanks for that but where is that motor lock? sorry for my ignorance
@darlenecampbell62159 күн бұрын
Thank you very helpful
@traveler.west19 күн бұрын
You’re so right…fear of the unknown is what keeps most of us from house projects. That much said, thank for your tutorial it’s great😊
@bryonwhitmire665810 күн бұрын
How do i get a invitation code? Wont let me register...
@JtGlass-o9k10 күн бұрын
What size thread is it
@abc456f11 күн бұрын
I recently took my Technics SL-QD2 turntable out of the closet after 20+ years. Had to do quite a bit of fiddling with it but it's working fine. Got a new stylus for the Shure rxp3 cartridge. Has a crack in the dust cover but still in one piece. I've seen acrylic one selling for $129! I don't need a new cover that bad. All my old albums are in bad shape. Warped, scratched, really not playable. So I just ordered the Beatles white album with the stereo remix to hear how the tt sounds. My home theater 5.1 receiver doesn't have a phono input and the cd and aux inputs don't supply enough power. Luckily I have a Pioneer stereo receiver in my computer/studio room with a phono input. Had to use ground wire which completely got rid of the hum. Looking forward to listening to vinyl again!
@josephginno2511 күн бұрын
Does it work with repairing avi files?
@striker121111 күн бұрын
@@josephginno25 no this is for mp4 format only. Good luck with your recovery, there are many tutorials on AVI but you'll need something like MediaInfo to find the codec used.
@MrsGmia11 күн бұрын
I watched this entire thing just to see how to fold it.
@JessForJoy11 күн бұрын
I wish all reviews tried to kill the product like you did here just to see what happens. Super helpful! Thank you.
@joseguevara184411 күн бұрын
I have to pure oil or not.?
@TrinstarMurphy-pn9wg13 күн бұрын
There’s other wind seekers
@acort1013 күн бұрын
Any experience with the Champion open inverters? Looking at this model and champions similar size but champion has dual fuel for $480 at Walmart now. Or stepping up to next size up in both brands in the 5000w running range. Only need for back up 1-2 times a year in Houston for either hurricane or ice storm. Typically 1-3 days. Running 1 fridge, freezer, fish tank, some LED lights, tv/internet and possibly adding a window unit in the 1000-1200 watt range
@striker121113 күн бұрын
I have no experience with the champion. Mines a backup to a standby generator so I was looking for cheap cheap, but dual fuel is nice. Propane doesn't go bad in storage like gas.
@acort1013 күн бұрын
@@striker1211 ok thanks for the quick reply. Yeah dual fuel for alittle bit more doesn’t seem bad plus I’m more familiar with the champion brand. I’m sure they’re from the same factory in china.
@DanMatulevich13 күн бұрын
Put ur own label
@SB-lm2jf15 күн бұрын
well done, young man. had to replace my lower unit in that same 115 about 4yrs ago, changed the break-in oil after about 10hrs. i just had it in the shop for other stuff, went to change lower unit oil while on the trailer. oil outta the top 2 looked fine. oil out of the bottom plug came out milky white. know anybody who sells lower units for that old motor? I'll ask my favorite boat mechanic if there's a cheaper fix but i'm prepared for the worst (again).
@striker121115 күн бұрын
If the lower unit is still working you probably just need the prop seal, fishing line cuts it up. Thank you for reminding me to check my LU oil lol. My boat is down right now cuz a squirrel chewed a hole in the gas tank.
@SB-lm2jf15 күн бұрын
@@striker1211 is changing the prop seal a DIY project or should I run it to my mechanic?
@SB-lm2jf15 күн бұрын
@@striker1211 oh yeah, yes it is still running. I have noticed that if I hammer it, the proper spin a little faster than the rest of the motor intermittently
@nevezeraa15 күн бұрын
Were you testing in normal mode?
@davidirigoyenpakal974015 күн бұрын
Yo tengo uno instalado, suena muy débil, solo saca 38RMS,
@carparking964416 күн бұрын
This is how to program a key for a Ford Escape 2009?
I have the same model pressure washer and after draining the old oil, the machine took right around 0.6L of oil (less than a quart). I saw some others took 0.9L in the comments below. Mine was built in 2017 and also has electric start. Thanks for the video!
@striker121120 күн бұрын
@@webcompanion this one does not have electric start, I had a Subaru with electric start but must've missed the Yamaha
@fairvalues451021 күн бұрын
Great test, thanks.
@David-ro2lz22 күн бұрын
Thanks, brother. You saved me some money and I fixed my truck in the parking lot of Home Depot lol
@brendatrapp60722 күн бұрын
Thank for this great info! Most helpful I have found!
@stevedobson874223 күн бұрын
Awesome video, followed the instructions and it worked perfectly. I soaked the insert but then thought to use a heat gun once the rubber insert had cooled. The heat gun can save you time. Just apply light heat from about a foot away from the rail insert as you are inserting and pressing it into the rail. Be careful not to apply too much heat or the rail gets too soft to work until it cools a little. The thin wooden spoon works great but I switched to an automotive plastic body tool and it was even more suitable. Just thought I would confirm that this was a great video and I proved out his method and found some slight improvements that might help others. Happy boating!!
@kin_ja23 күн бұрын
my lens is also stuck it wont come out fully any tips?
@ripleyjustice605724 күн бұрын
Imagine a happy little chicken clucking away, enjoying the sunshine on her face, and her life, which to her means everything, is only worth .30 cents for each of her wings. 😢😢😢😢😢
@calmac719424 күн бұрын
Any idea how to turn off the optional voice message option?
@calmac719424 күн бұрын
I figured it out. If anyone is curious, just have to press and hold the record button for like three seconds until the red light comes on and just don't say anything before releasing it.
@fenceman5324 күн бұрын
If the o rings don’t fit you must acquit
@FrankieRove25 күн бұрын
does it work for mp4?
@PainterD5425 күн бұрын
It takes a bit to get used to how to install it properly. It has to be tight and centered.
@loganmcnab158225 күн бұрын
I believe I wanted to buy leave it to Beaver on DVD because VHS doesn’t exist anymore
@ABCsurfingu26 күн бұрын
Thanks for uploading this data 👌🏻 I was looking for that type of information 😎
@eegg695427 күн бұрын
Wanna have some fun? Replace the whole dipstick tube.