Пікірлер
@mathewbriggs6667
@mathewbriggs6667 9 сағат бұрын
Abused many stud finders and never have I ever had a stud finder actually work everybody should just use a magnet
@UtechUreview
@UtechUreview 9 сағат бұрын
@@mathewbriggs6667 hi mathewbriggs6667. The Franklin’s sensor pro is best at or detects wooden stud locations and the Bosch multi level surface detector detects dense material, live cables , metal pipes e.t.c . They are very viable and feasible. Understood if you use high impacting magnets that indicates the presence of a metal fastener which indicates there is a stud behind part of the wall and where you can the measure 16 inches from that point in either direction to find the edges of a stud which is a pro. The con is, one who is using tribal knowledge or inexperienced may misconstrue a metal pipe or metal strike plate covering electrical cables as a stud location behind the part of the wall and with a wrong drill set being selected I.e cobalt or masonry or dedicated drill bit set, during drilling the operator may strike a metal water pipe or live cable buried through the plate. Nevertheless, Appreciate and thanks for the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@elizabethlumu8027
@elizabethlumu8027 6 күн бұрын
Thank you very much
@UtechUreview
@UtechUreview 3 күн бұрын
Appreciate the feedback and glad was of help. Dont forget to subscribe, like and share. Helps channel grow
@elizabethlumu8027
@elizabethlumu8027 6 күн бұрын
The best video
@UtechUreview
@UtechUreview 3 күн бұрын
Thank you. Appreciate the feedback
@nafisaramzan6162
@nafisaramzan6162 12 күн бұрын
What happens if the needle didn’t move and then you turned the valves back and it is now on 3, slightly over 3? Help?
@motherslove7246
@motherslove7246 13 күн бұрын
Hi, what should be the recommended level of the gauge is it 1, 2, or 3. Thanks
@UtechUreview
@UtechUreview 12 күн бұрын
@@motherslove7246 Hi Motherslove7246, 1.5 or as stipulated in your manual. Don’t forget to subscribe, like and share. Helps channel grow. Have a blessed week
@1mistaGROOVE
@1mistaGROOVE 13 күн бұрын
Very good instructions. Thank you. God Bless
@UtechUreview
@UtechUreview 3 күн бұрын
Appreciate the feedback 1mistaGROOVE and glad it was of help. Don't forget to subscribe, like and share. Helps channel grow. Have a great week
@terrylina.8366
@terrylina.8366 20 күн бұрын
thank you so much! This worked
@J4_Vibezz
@J4_Vibezz 26 күн бұрын
How can you do on Android?
@MeMyselfAfrobeats
@MeMyselfAfrobeats 27 күн бұрын
God bless
@marychampion3492
@marychampion3492 Ай бұрын
Thank you so much! I needed to know if the pool walls would just rise on their own before I added water. You are the only one able to answer my question!😊
@Djidroneswe
@Djidroneswe Ай бұрын
I have factory reset my charge 5 but it still doesnt connect to my phone but it connetcs to other devices but not my phone
@vovkavavan380
@vovkavavan380 Ай бұрын
Could you please tell me how to reset the maximum and minimum readings in the "memory" column of this thermometer?
@UtechUreview
@UtechUreview Ай бұрын
Hi vovkavavan380, To reset the maximum reading on the TP-55 thermometer, you typically need to press and hold the power or mode button (all time reading or 24 hr button for 3secs) as exemplified in the video. Try pressing and holding either of these buttons for a few seconds to see if it resets the maximum reading. If that doesn't work, refer to the user manual for specific instructions on resetting the maximum reading on the TP-55 thermometer. Don’t forget to subscribe like and share, helps channel grow.
@AnotherEarthling_
@AnotherEarthling_ Ай бұрын
I have a 12x30 inflatable pool how long should it take to fill?
@markk3140
@markk3140 Ай бұрын
Any link to get if it does thanks
@markk3140
@markk3140 Ай бұрын
Hi will this work on my samsung tv. Mod num UE37D5000PW thanks
@UtechUreview
@UtechUreview Ай бұрын
Hi Markk3140, you are better off liaising with Samsung customer service or your local retailer. As you TV is an old model and doesnt incorporate Wi-fi, You can purchase from third party vendors who sell this added user functionality if samsung stores have run given they may have phased out TV's without inbuilt wifi capability. Hope this helps. Dont forget to subscribe, like and share. Helps channel grow
@StevenRiach-kj7ny
@StevenRiach-kj7ny Ай бұрын
Very good instructions had no problem at all in getting my disco with this man show me the way...😊
@khanwalkarnitin
@khanwalkarnitin Ай бұрын
Thanks this solved my problem
@user-wf5ih3pc6f
@user-wf5ih3pc6f Ай бұрын
I don't have boost switch.... Do they boost automatically when showering?
@Sovative
@Sovative Ай бұрын
straight to the point, thanks!
@RatchelDelicano
@RatchelDelicano 2 ай бұрын
Panoooo
@johnridout8121
@johnridout8121 2 ай бұрын
this simple fix saved me £320 in boiler repair costs thankyou so much john
@UtechUreview
@UtechUreview 2 ай бұрын
Appreciate the feedback Johnridout8121. Glad your sorted and was able to be of some help. Don’t forget to subscribe, like and share. Helps channel grow. Have a great week
@JohnnyChinch
@JohnnyChinch 2 ай бұрын
THANK YOU!!! I was ready to smash my computer LOL
@UtechUreview
@UtechUreview 2 ай бұрын
Appreciate the feedback JohnnyChinch. Glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow.
@mborsic94
@mborsic94 2 ай бұрын
have you perhaps tried to find a live wire between two reinforcement nets in the concrete? I have a specific scenario where the drywall will be installed on the ceiling but the wires are in the concrete plate made with two rows of reinforcement metal nets. Between them, there is a plastic canal where the wires go trough. To avoid drilling holes for the drywall trough those plastic canals, it would be of much help if some detector can see wires trough concrete and behind metal reinforcement net. Do you know if this or some other detector is capable of doing that?
@raejenson186
@raejenson186 2 ай бұрын
Thank you for making this. My partner just bought one and couldn't work out how to fit the blade it was driving him nuts! I thankfully found your video and goit it working for him.
@UtechUreview
@UtechUreview 2 ай бұрын
Appreciate the feedback raejenson186. Glad your partner is sorted and made up for yous two. Don’t forget to subscribe, like and share. Helps channel grow
@MuhammedMustafa-fz1xe
@MuhammedMustafa-fz1xe 2 ай бұрын
Hat funktioniert ich Kuss doch dein herz
@UtechUreview
@UtechUreview 2 ай бұрын
Schätzen Sie das Feedback, MuhammedMustafa. Ich bin froh, dass Sie sortiert sind. Vergessen Sie nicht, sich zu abonnieren, zu liken und zu teilen. hilft dem Kanal, zu wachsen
@codreanueduard3953
@codreanueduard3953 2 ай бұрын
I’m at the job right now. Pressure is very low 0,4bar and doesn’t go up. F1 still on display. Reset doesn’t work and switching off and back on completely from fuse switch still doesn’t work. Boiler doesn’t restart at all. I have to use my manual pomp to pressurize the boiler
@stanislavmusin8879
@stanislavmusin8879 2 ай бұрын
Thank you 🙏 works for me 100%
@lutfidzolmi
@lutfidzolmi 2 ай бұрын
nice, straight to the point! thanks mate
@UtechUreview
@UtechUreview 2 ай бұрын
Appreciate the feedback lutfidzolmi . Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@andrewpaullavender5701
@andrewpaullavender5701 3 ай бұрын
thanks sorted me out
@db302
@db302 3 ай бұрын
The best mit-out-sound video ,with detailed explanations I have ever found. Thanks for the effort put on this.
@UtechUreview
@UtechUreview 3 ай бұрын
Appreciate the feedback db302, glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@omandnamaste
@omandnamaste 3 ай бұрын
Gosh, you saved my life! Nothing worked ... apart this. Thank you so much for that video!!!
@UtechUreview
@UtechUreview 3 ай бұрын
Appreciate the feedback omandnamaste, glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow.
@JAYSONsTheBarber
@JAYSONsTheBarber 3 ай бұрын
its safe
@FabianGronow
@FabianGronow 3 ай бұрын
Your video is shit
@patrykpiwonski3990
@patrykpiwonski3990 3 ай бұрын
Can you show how to change battery on it? I open all screws, find round batterie inside but it looks like glue on something. Can you show how to change it please ? Thank you
@Dr.Gunsmith
@Dr.Gunsmith 3 ай бұрын
What if I don’t want the 24/7 running on trickle but don’t have a on off isolator switch, can I somehow turn it of in the fan settings, just for the fan to come on when I’m in the bathroom with the light on. As mine was already fitted and is rigged to only the light switch when I turn it on the fan comes on. I don’t want it to constantly run 24/7 In trickle mode.
@UtechUreview
@UtechUreview 3 ай бұрын
Hello drgunsmith4099, If you don’t have a dedicated bespoke isolator switch linked to your extractor fan but a conventional switch linked to it which appears to be your case, the switch in any effect does the same job as the isolator switch and booster switch. So once you are done from the bathroom. Turn off your conventional switch. Instantly it goes from Boost to trickle speed. The trickle/boost speed should run for the duration you were in the bathroom viz a viz humidity or man made spikes generated. Normally you can cut down the time the trickle speed runs by flicking an isolator switch OFF. In your case you don’t have an isolator switch so my educated guess would be either 1. that the switch does both the Job of the Booster when ON, Trickle when OFF and trickle runs for period of occupancy 2. That the switch does the Job of Booster when ON, when humidity levels drops it automatically goes to Trickle speed and when Switch is OFF it turns Trickle or extractor fan OFF completely. There is no way of knowing what the plausible mode of operation or modus operandi of the rigged connection is without observing as trickle speed is a much quieter speed depending on the setting. So take OFF your cover plate and monitor when the fan rotating actually stops during usage using the processes in 1 & 2 and you should be able to work it out. I hope this helps as is the best I can do remotely. Don’t forget to subscribe, like and share. Helps channel grow. Have a great week ahead
@mreverybody1150
@mreverybody1150 3 ай бұрын
Great review with excellent detail and demonstration. Very appreciated. Ive subscribed and liked
@UtechUreview
@UtechUreview 3 ай бұрын
Appreciate the feedback mreverybody1150. Glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@yinginanensanen
@yinginanensanen 3 ай бұрын
Out of all the videos I browsed through on this topic, this is the only one I found that pointed me to this easy physical issue. Thanks!
@UtechUreview
@UtechUreview 3 ай бұрын
Appreciate the feedback yinginanensanen. Glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@allenb8996
@allenb8996 3 ай бұрын
Worked like a champ!!! Thanks!!
@UtechUreview
@UtechUreview 3 ай бұрын
Appreciate the feedback allen8996 and glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a brilliant week
@Fayellen95
@Fayellen95 3 ай бұрын
Thank you! The silly clock on mine keeps getting out of time and being like 45 mins fast!! I can't find the instruction booklet and couldn't remember how to change time! Reminder to self: Press the PROG and UP buttons together for 3 seconds!!!
@UtechUreview
@UtechUreview 3 ай бұрын
You welcome Fayelien95 and glad you are sorted. Appreciate the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@halimamn4409
@halimamn4409 3 ай бұрын
~/Library
@ErickOdillepa
@ErickOdillepa 3 ай бұрын
thx u, its work for me :3
@UtechUreview
@UtechUreview 3 ай бұрын
You welcome ErickOdillepa and glad you are sorted. Appreciate the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@Ackojas
@Ackojas 3 ай бұрын
Thanks. Helped for my A6
@UtechUreview
@UtechUreview 3 ай бұрын
You welcome Ackojas and glad you are sorted. Appreciate the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@shinobikonohagure92
@shinobikonohagure92 4 ай бұрын
Hi, I don’t have the blue lever or green lever on the boiler. There are yellow and two black lever only. How can I rectify this faulty?
@markjamesgoddard2247
@markjamesgoddard2247 4 ай бұрын
How do you take off the internal part to clean the fan?
@timtupaea5822
@timtupaea5822 4 ай бұрын
Just tries this and it worked thank you so much ..
@UtechUreview
@UtechUreview 4 ай бұрын
Appreciate the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@Alison-xc8zx
@Alison-xc8zx 4 ай бұрын
Thank you so much!
@UtechUreview
@UtechUreview 4 ай бұрын
You welcome Alison, glad you sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a lovely weekend
@irfany50
@irfany50 4 ай бұрын
How to switch off preheat setting
@musiclover77534
@musiclover77534 4 ай бұрын
Horrible video. Why did you bother?
@erilenferrer
@erilenferrer 4 ай бұрын
Thank you
@UtechUreview
@UtechUreview 4 ай бұрын
You welcome erilenferrer. Appreciate the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Happy holidays
@denzelonyangod109
@denzelonyangod109 4 ай бұрын
Wooow, wooow I can not thank you enough. Woke up with no hot water, the way I was panicking!! Such an easy fix, I can now shower ohhh, be blessed, it is well